Find an experienced gas fitter in Melbourne Western Suburbs

I need a gas safety check done two properties. regular work potentially be available as there is a couple of properties in the area.

Gas stove ignition is not working for 2 burners and one is not turning on

The gas hobs are working, only one goes out as soon as you let go of it

Needing a gas cooktop disconnected and shut off completely. Replacing with an electric induction cooktop. Licensed only. Preferable time is after 6pm Thursday Oct 29th

Need to change the existing gas line. Pro ide quotes. Can spend around 7 to 8k

Electricity,Gas, smoking alarm and rental minimum standard checks price?

Burners cleaning Vents and exhauster cleaning

We're setting up a pet cremation facility in Laverton North and need a TYPE B LICENSED gasfitter. Please only offer if you hold a current Type B gasfitting licence. Scope: 1. LPG supply from Elgas cylinders (2 banks of 5 × 210 kg) to the furnace: - High-pressure manifold, first-stage and second-stage regulators with filters - Isolation valves - Copper gas line from the cylinder compound to the furnace, including a core cut through a concrete wall 2. Type B appliance work for the furnace: - TLFS-20 multi-chamber cremator with 7 Baltur burners (6 × BTG15, 1 × BTG28) - Total load approx. 4,400 MJ/h, burners need 3–5 kPa at the inlet (minimum 3 kPa) - Burners supplied as natural gas, to be set up and commissioned on LPG 3. All Energy Safe Victoria submissions and approvals, for both the gas line and the furnace (Type B appliance acceptance) Not included: flue/chimney, ventilation and electrical. Please include in your offer: - Your Type B licence number - Whether 2 banks of 5 × 210 kg cylinders can supply 4,400 MJ/h, or if you'd recommend a bulk tank - Pipe size allowed for - Lead time and payment terms Timing: install planned around January, subject to our planning permit. Happy to arrange a site visit.

My gas burner is not self igniting and I have to use a match stick

Gas topper is not working Its ignitimg but as soon as we release the nobe the flame stops

Need 20mm minimum easy hooker attached to fryer. Plumber installed 1/2 inch. Not enough supply

Licensed gas fitter needed to inspect/fix a 4-burner gas cooktop in Yarraville. One burner won’t stay lit and the other burners have inconsistent flame strength, particularly when several are used at once. Looking for diagnosis and repair.

I had a compliance inspection done and require a quick check to validate and repair if required the items picked up by previous gas plumber being: gas regulator not in accessible spot & difference in meter reading at start & finish of inspection Implying slow leak.

The kitchen cupboard next to the stovetop smells like gas (the gas piping runs through this cupboard). It's unknown where the gas is leaking from. It's been turned off at the mains for now. We need someone to inspect it, find out whether the gas leak is, and repair it. Licensed gasfitters only.

Please run gas pressure test at shop.

I have a solar boosted gas hot water instantaneous unit with tank. Need to get it repiped and convert to just gas instantaneous unit.

Gas pilot has been off for more than 2 weeks. A licenced plumber needed to ensure hot water and ducted heating is accessed 24/7 to home.

Need a check for any carbon dioxide and syncing for the remote.

Hi, I’m looking for a licensed gas fitter to inspect an already installed gas cooktop. Just need a quick check of gas connections, leaks, and overall safety/compliance, and a compliance sign-off if all is okay. If required, a gas isolation valve may need to be added underneath the cooktop. A cement sheet has been installed behind the tiled wall for heat protection due to slightly reduced clearance (around 125mm). Original installer is unavailable, so just after a routine safety check for peace of mind. Location: Melton west, 3337

Needing valves looked at maybe replaced on a stove. I brought new switches hoping that would fix issue as some are not igniting the burner.