Find an experienced gas fitter in West Melbourne

Hi there, I need a licensed plumber and gas fitter to manage the plumbing and gas works for a kitchen and laundry renovation. We are moving to a fully integrated laundry and a modernized kitchen. Timeline: The project runs between September 23rd and September 30th. This requires two separate visits. Scope of Work: Visit 1: Rough-in (Around Sept 23rd-25th) Safely cap off the existing water pipes and gas connections. We are doing an integrated laundry. You will need to remove the existing wall-mounted washing machine points and redirect the plumbing so the washing machine connects directly from within the new laundry sink cabinet. Visit 2: Fit-off (Around Sept 28th-30th, after cabinets are in) Laundry: Install the new laundry unit, sink, and mixer tap. Kitchen: Reconnect the kitchen sink and gas cooktop. Install the new kitchen mixer tap. Rangehood: Install the new u under mount rangehood in the kitchen. Requirements: Must be a licensed plumber and gas fitter. Must provide a Compliance Certificate for the gas work. Must be able to coordinate with our cabinet install timeline. Please let me know your availability to get started!

Blanco gas cooktop (about 14 yrs old) Suspect it’s a faulty thermocouple. The main burner doesn’t stay lit when holding the knob down, or it takes a long time of holding down the knob for it to finally stay lit. All other burners working fine.

I had a compliance inspection done and require a quick check to validate and repair if required the items picked up by previous gas plumber being: gas regulator not in accessible spot & difference in meter reading at start & finish of inspection Implying slow leak.

I need someone to refill gas in under bench fridge

We need the gas disconnected from the caravan fridge. We also need a certificate for the work.

Rangehood light to be fixed and gasburnera not alighting

Freestanding gas cooker needs compliant anti-tilt restraint chain/bracket(s) installed. Current chain is too small and only fitted on one side. Please supply and install the correct hardware, check the flexible gas hose setup, test the cooker and provide written confirmation of rectification. Please quote total price including materials and GST.

I need a licensed Victorian gasfitter to rectify a non-safety-critical item identified in a recent gas safety inspection. The freestanding gas cooker has an existing high-level flexible hose setup. The report notes the cooker restraint is inadequate: there is only a very small chain on one side. I need compliant anti-tilt restraint chain/bracket(s) supplied and installed, securely fixed to a suitable wall/stud or as required by the appliance manufacturer. Please include: Supply and install compliant cooker anti-tilt restraint hardware Check the high-level flexible gas hose is safe, correctly positioned and not under strain Test the appliance/gas connection after work Provide an invoice and written confirmation that the issue has been rectified Please quote total price including materials, call-out. Photos and the gas report can be provided.

Need the mandatory Gas & Electric safety check plus Smoke Alarm safety check done.

The kitchen cupboard next to the stovetop smells like gas (the gas piping runs through this cupboard). It's unknown where the gas is leaking from. It's been turned off at the mains for now. We need someone to inspect it, find out whether the gas leak is, and repair it. Licensed gasfitters only.

Please run gas pressure test at shop.

I have a solar boosted gas hot water instantaneous unit with tank. Need to get it repiped and convert to just gas instantaneous unit.

Gas pilot has been off for more than 2 weeks. A licenced plumber needed to ensure hot water and ducted heating is accessed 24/7 to home.

Need a check for any carbon dioxide and syncing for the remote.

Hi, I’m looking for a licensed gas fitter to inspect an already installed gas cooktop. Just need a quick check of gas connections, leaks, and overall safety/compliance, and a compliance sign-off if all is okay. If required, a gas isolation valve may need to be added underneath the cooktop. A cement sheet has been installed behind the tiled wall for heat protection due to slightly reduced clearance (around 125mm). Original installer is unavailable, so just after a routine safety check for peace of mind. Location: Melton west, 3337

Needing valves looked at maybe replaced on a stove. I brought new switches hoping that would fix issue as some are not igniting the burner.

Need to disconnect and block off gas stove. Also check for leaks while in there so it’s not left dodgy, but also shut off mains as gas is no longer needed. I’m getting the stove removed the following day hence the deadline. Can be any time on Tuesday from 9 until late. Other info: single story home, about 80 years old.

I have an existing gas heater that needs to be decommissioned, including capping and making safe services connection. Disposal of the redundant unit is my responsibility. Need a licensed gas plumber to do disconnection of existing gas heater unit.

Remove Gas Heater and Cap the Gas line. Gas heater is in working condition. Happy for you to take it if you want as I no longer need it.

Replace my gas burner . Cut the laminate board bench to the new size and replace the burner