50 Natural Stone Flooring Experts Near You

I need an experienced handyman to Polish and buff natural stone wall of about 10 metres long and 2 metres high. See photo. I want it super shiny as I am putting glass against it in 4 days. I am flexible but want it to be done ASAP You must have your own equipments. Thanks

I have three slabs of natural stone, which need to be cut to my new kitchen bench top. The stone in already mitred on 80% of the edges with the balance required to be finished to the new kitchen configuration and installed. I would prefer if this can be done on site and do have an undercover area. I can help with any lifting or install as I am a carpenter. Please see drawing attached. Material is already honed and sealed. Happy to talk about hourly rates only.

Natural stone will need to be set on concrete base using sand&cement. 2 areas will need to be laid, both areas are uniform with existing fall and no odd/strange angles or shapes. 1. Bluestone 20mm - 11.62sqm - Approx 15mm sand/cement 2. Travertine 12mm french pattern - 15sqm - approx 18-23mm sand/cement All stone will be provided along with the following: 1. Grout - Mapei Ultracolor Plus Please provide in your quote material cost for Sand & Cement. Price on Airtasker is only for labor. Stone will need to be cut to fit - all cuts would likely be right angle.

replace all the natural stone floor cover with average solid timber floor? Around 120 square m.

I require someone to reseal my natural stone coping for my pool. I want the wet look for natural stone.

Hi there, I am looking for someone to seal natural stone on a feature pillar which is part of the facade of the house. Approx 30m2. The scaffolding is in place to be able to apply the sealant to the whole pillar

Installation of natural stone in a newly constructed house

Small natural stone job as per the photos Concrete is done Tiles available , just need tiler ,glue and grout

I have the products (cleaner and sealer) and will provide this and am looking for your time to clean and seal newly laid tiles. Only thing you will need to provide (besides your time) is a broom handle or mop handle to attach the the cleaning pads that I have. It can be done with out that but it'll save you haven't to bend over too much. Ideally you have experience with this and can do a very professional job. Understands it is pretty straight forward but there is a process to follow and you need to be diligent. Approximately 90 sqm of tiles across 3 bathrooms and one balcony need to be done. This is to be broken up over 2 days.

The shower floor surface is approx 80x140cm. Attached are two photos of the shower which is essentially matte from a previously failed and abandoned cleaning attempt. The job is in Kew, vic 3101