Find a local floorboard profesional in Outer East Melbourne

We're looking for an experienced carpenter or timber flooring specialist for a small renovation in our living room in Mooroolbark. We have an old raised tiled fireplace platform in the corner of the room that we'd like completely removed. Important: The existing timber flooring was installed around the platform, not underneath it. This means that once the platform is removed, new flooring will need to be installed in its place and joined neatly to the existing floor. The area is approximately 1.5m × 1.5m, potentially up to 1.8m × 1.8m. The job includes: - Removing and disposing of the entire raised tiled platform. - Inspecting and preparing the exposed subfloor. - Installing new timber flooring where the platform currently sits, level with the surrounding floor. - Replacing the visibly damaged floorboards in the adjacent area. - Matching the existing flooring as closely as possible in material, thickness and appearance. - Installing new skirting boards along the affected walls, matching the existing profile. - Supplying materials and disposing of all waste. Please note that some of the existing floorboards have lighter or darker patches from an old adhesive covering. These are purely cosmetic and do not need replacing. We're only interested in replacing the sections that are genuinely damaged or peeling. A new sofa will eventually be positioned in this corner, so our priority is having a properly installed, level and durable floor rather than a perfect colour match. We don't have spare floorboards, so we'd need assistance sourcing suitable materials. Photos are attached showing the platform, surrounding flooring and the existing floorboards stopping at the platform's edge. Please provide an estimated quote including labour, materials and waste removal. Thank you.

Needing to replace the decking boards with new Merbau boards. I will pull up exisiting boards and should be able to source new boards. I will just need some guidance on board lengths and widths for the job. Decking frame is in good condition. Please provide offer to installed the new Merbau boards only. Please use photos for deck size to help with your offers. $10 offer used, as not sure how much this should cost. Thank you Deck size Main area Length 7m Width: 2.5m Little area Length 2.2m Width 1.15m Corner Length 2.20m Width 1.10m

Second floor weather repair and repaint

I'm looking for an installer for Hybrid floorboards. 80~ 82 metres

We need nails to be taken out of our floor boards. We have taken some out just need the remainder to be taken out.

The foundation beams have rot. I need to remove all the boards on top so I can replace the foundation and put the boards back on. I’ve done half but run out of time. 33 rows left. I’ve got the tools. Want to try and preserve boards so I can reuse.

Engineered floorboard. Has a scratch. Would like filled in

Sand & Polish Existing Timber Floorboards – Approx. 80 m² I’m looking for someone experienced in sanding and polishing timber floorboards in my home. The existing timber flooring in most areas, including the living room and corridors, is in good condition and only needs a light sand and polish. Recently, timber floorboards have been exposed underneath the kitchen tiles and carpet in 3 bedrooms. These areas need to be sanded and polished to match the existing timber flooring as closely as possible. Area: Approximately 80 m² Work required: * Sand and polish the existing timber floorboards * Prepare and sand the newly exposed areas * Match the finish and colour of the existing flooring as closely as possible * Supply materials and complete the job I’m looking for someone experienced with solid timber floorboards and preferably someone who can inspect the floor and recommend the most suitable finish.

I've removed the existing carpet to sand and polish the floorboards but there is 2 sections that require repair (basically, replace the horizontal/vertical panels so it matches the rest of the floorboards).

Sand & restain/lacquer etc to bring back to normal

104sq m of floorboard to be installed November -December 2026

Needing help to finish off putting down self-adhesive vinyl planks in a bedroom. The room is around 18m2. Most of the floor boards in the middle of the room have already been put down, needing help with the boards around the edges which need to be cut to size e.g scoring with utility knife and then snapping. Also around the heating vent.

I have dropped a tiles box and one piece of floorboard has been damaged a little bit, went down for about 5-6mm. The piece is 83mm wide and 460cm length. I won’t mind filling it with wood filler nicely and then polish coat ontop.

We have some natural floorbaords that have split due to water damage and need either repair or replacement

Need someone to swap 2 to 3 hybrid floating floorboards between rooms. Pull 2 to 3 floorboards from another room and replace with the affected ones (see attachment).

Needing help to remove carpet and vinyl flooring. 3 rooms have carpet and vinyl flooring in living and dining 30 sqm of carpet approx 60 sqm of vinyl flooring May also need some help with moving furniture around

I have new tenants moving in on Saturday. All areas of the house have original floorboards except the kitchen area. It's vinyl on top of Masonite board nailed down to existing floorboards. I need the vinyl removed to expose original floorboards. Sanded and polished. Other renovations underway will be completed today.

Need to replace a damaged floor board. I have the spare replacement.

Floorboards were replaced recently, leaving a gap between existing skirting boards and floor. Need to install scotias to cover the gaps. May have to replace the skirting boards in a couple of spots as well.

I have herringbone floating floorboards, the floors are clear and ready. I need the hallway and 1 room done not the rest of the house as it’s not cleared out yet.