Find a local floorboard profesional in Sydney Eastern Suburbs

Scratched floorboard that needs to be detailed to improve appearance

Lay down timber floorboards and acoustic under. The space is 15.5sqm

Install or repair some floating timber flooring in kitchen in between removal of old kitchen and installation of new kitchen. Also install floor boards in a walk in robe area, around 2.5m x 1.5m

A few Floating floorboards that are bouncy and need expansion gap I have spare floorboards

Need laminate timber floor boards repaired/replaced across 3 rooms. Damaged boards have scratches and need to be removed and replaced with matching spare boards we already have. Areas: • Bedroom 1 – 3 damaged boards • Bedroom 2 – 5 damaged boards • Living room – 2 damaged boards Flooring is laminate timber flooring and appears to be glued down (I think) We already have plenty of spare boards ready to go. Looking for someone experienced with laminate/timber floor repairs and board replacement. Need someone with necessary tools/materials to remove and replace glued boards properly.

Our floorboard appears to have been scratched, perhaps from the bottom of an office chair. Looking to see if this can be fixed with a Laminate floor repair kit without replacing the full floorboard

We have a studio above a garage that we need to laminate flooring laid over particle board subfloor + skirting installed .We will supply the laminate, underlay and skirting. The room is 5.6m x 5m. Installation tools needed: tapping block to easily click planks together, a pulling bar for hard-to-reach places and spacers to provide perfect expansion joints (8-10mm) between walls and floor.

Need experienced flooring installer for remedial flooring work in Sydney. Approx 25m² of recently installed engineered timber flooring needs to be carefully lifted, a few defective boards replaced, and flooring re-glued/relaid. Details: • Floor installed approx 2 weeks ago • Using Acouslime 3 in 1 adhesive • Materials supplied (boards and adhesive) • Need someone experienced with direct-stick engineered timber flooring • Must be capable of careful lift and relay with minimal board damage • Labour-only job (day rate) Looking for quality workmanship and experience with remedial flooring repairs. Located in Bondi Beach. Can provide images and video

- Full sand back + stain + seal - Approx 54m² - Includes fixing scratches as much as possible (see close up pictures attached) - Experienced floor sander preferred

I need floorboards laid in a small area. The total area is 1300mm x 800mm I need the 3 existing damaged hardwood floorboards removed and the entire space then laid. It will likely take 7-8 floorboards at 1300 mm in length I want to try to match the existing hardwood floors in the kitchen. The new flooring in this space will need to sit flush with the existing floorboards in the kitchen

Floor boards damaged. Need recommendation and quotes to rectify damage. Do I replace them or sand them back. Cat scratches and pot plant water damage. Please advise and quote. About 25 square metre room. Most serious damage covers about 9 m squared area.

2 flights of stairs, 3 bedrooms and the common area uostairs to be completed. Install only. I would supply.

House mate has damaged the kickboard and timber floor. Looking to have it brought back into acceptable shape

Carefully fill the gap between my dark wood floors and white skirting boards with sellys’s no more gaps or the like. The perimeters of the downstairs kitchen and living areas of a terrace house. Also hang a curtain rod.

One wooden floor plank has fallen in.

replacement floor boards where a wall has been taken down

Need to replace some timber decking boards on the balcony that have dry rot

Title: Sanding & Polishing Cypress Pine Floorboards – 30m² (Queens Park) Description: Looking for an experienced floor sander to sand and polish cypress pine floorboards at my home in Queens Park (139 Newland St). Areas & Sizes: Bedroom 2: 3.3m × 3.0m = 9.9m² Kitchen: 1.0m × 3.0m = 3.0m² 3.3m × 4.0m = 13.2m² Kitchen total = 16.2m² Laundry: 1.0m × 4.0m = 4.0m² Total area: ≈ 30m² Scope of Work: Full sand back (cypress pine) Fine finishing sand (important for cypress to avoid swirl marks) 3‑coat polyurethane lacquer (please quote for both oil‑based and water‑based options) Buff between coats Edges and corners machine‑finished Dust minimisation preferred Please include all labour + materials in your quote Access: Ground floor, easy access. No furniture in the way. Timing: Flexible — looking for earliest availability. Please include in your quote: Total price Finish type (oil‑based or water‑based) Estimated duration Any additional costs (repairs, gap filling, moving appliances) Thanks!

Looking for quotes to sand floorboards in a living room (approx 19sqm). Only looking to sand at the moment - not stain or seal.

Looking for someone to remove lino and sand/polish floorboards.