Find experienced local fencing contractors in WA

We had a handyman build a fence and he was going to fix the gate but has become unwell so we need someone to finish the job! We need a garden gate fitted. We will source the gate, but not the hardware to fit it, so you’ll need to source brackets, screws etc.

I am looking for a handyman or tradesperson to install a self-closing spring or hinges and a latch on a garden side gate. Job details: • Install a spring for self-closing function on garden side door • Install/adjust hinges as required • Ensure the gate closes properly and aligns correctly prefer someone with Own tools and equipment.

Small aluminium fence with 2 gates approx 1200mm high x 2100 wide

One of my timber retaining wall posts has failed and needs to be replaced. I’ve already removed the old rotten post (see photos) and taken measurements to assist with quoting. Please: Supply and install 1 new treated post Secure post to support the upper sleeper beam and stop further collapse Must be structurally sound and weather-resistant Preference for someone with landscaping or carpentry experience

11m fence install. Already have the supplies.

Build a fence around veggie garden to stop dog digging holes! It is roughly 7m of fencing needed and no more than 1.5m high. Something super simple made of wood or pallets. Thanks

Install garden barrier to bottom of colourbond fence with tek screws. We have the garden eding and tek screws. Will need to difmf sand back from fence to install. This is a new build. Approx 24 metres.

I need 2 wooden slats reattached to my front garden fence.

For front fenced lawn, I need metal slate gate ( Matching slats). It will be 2 doors of approximately 1 meters by 1 meter.

- Ground is rocky and gravelly in some areas - Ground is hilly in some areas - Can be made how you like as long as it works and is secure

I need my garden gate replaced. Its a standard 90x150 arched timber gate. I would like you to: - Supply the new gate - Swap over any hardware from the original gate to the new gate - Hang the gate - Dispose of old gate

Colour bond garden gate needs lifting as it has dropped and is difficult to open. Scraps on the ground

Jarrah closed picket, wooden gate has been sealed and painted. No hardware or posts included. We need you to create infill for this to fit. Size of gate - 180cm x 90cm Size of gap - 116cm $200 plus costs

I need 2 x identical garden gates installed in my front courtyard. They are 1800mm high x 900mm wide & the wall openings are 1000mm wide, so will need timber to fill gaps (you to source & supply). I already have the hardware (hinges & latches), which also need to be installed. Require proof you've done this sort of thing before.

Hello I need some general gardening, installation of reticulation and also I would like wires to be installed on all my fences so I can train star jasmine.

demolish old brick cement rendered front fence and cement garden border ...remove all of the existing fence and footings. A skip bin will be available close to the fence being demolished for disposal of all relevant rubbish. Fence length approximately twelve metres and height ranges between half a metre to one metre. Width varies from ten to twenty centimeters The area will be free of any garden and hedge.

As shown we have 3 large wooden posts that need to be levelled and concreted into hole in ground (sand) already dug. Needed so we can fix two large decorative screens on the posts (see photos) for a vertical garden. Looking for someone who can do asap.

I need this section of garden blocked off, whether it be with star pickets and chicken wire or some other temporary idea. My dogs are constantly shitting in this section which is making it hard to clean up and attracting flies. Materials are not supplied but can be if you give me details, Bunnings is right around the corner. I’m down for ideas but it has to be temporary as this is a rental property and should be somewhat easy to remove. Just putting feelers out there for quotes so take make budget with a grain of salt.

The gate is 0.9m wide * 1.07m high and weights 10kg.

Limestone fence with pillars built on front boundary of property

Drilling small posts into colorbond fence and then the oscillot rollers. 4 x 2m lengths.

I need urgent installation of the Oscillot cat‑proof fence system. Details: • Install Oscillot rollers around my Colorbond fence perimeter • Add one small inward‑facing net panel in a corner with tall vegetation • Minor gate tweak (small internal net square or inward cap) Please let me know your earliest availability — the job is time‑sensitive. Thank you.

I need a dog fence installed in my courtyard area (see photo attached with red marked section). Details: • Approx length: 6–8 metres (straight run) • Surface: paved/concrete • Height required: approx 90cm–120cm • Secure enough for a medium-sized dog • Would prefer black powder-coated panels (open to suggestions) • Must be securely anchored (not temporary plastic fencing) Please quote including: • Labour • Materials • Any drilling/bolting required Please quote total cost including materials and installation for approx 6-8m dog fence. Thanks!

New Gate and Fabrication similar to photo below look for measure and quote

I am looking for someone to supply and install a wooden gate/fence (custom built to size) in two outdoor areas of my property. This is not a decorative job — the main purpose is containment for a cat/dog, durability, and safe access. The $1200 budget is inclusive of all materials and labour. Area 1 • Total width: ~ 142 cm • Requires: Gate + fixed fencing • Height: ~180 cm • Minimal gap at bottom (must be pet-proof) Area 2 • Total width: ~ 253 cm • Requires: Gate + fixed fencing • Height: ~180 cm • Minimal gap at bottom (pet-proof) General Requirements Materials: Simple and durable open to suggestions. Finish: Doesn’t need to be fancy functionality over appearance Gate: Lockable or latchable Bottom gap: Must be small enough that a cat or small dog cannot escape Supply & install included Must be suitable for outdoor use I’ve attached photos of both areas for reference. I’m happy with practical solutions and open to suggestions that keep costs down while remaining secure.

In need some Oscillot cat fence toppers installed on about 15m of fence and on top of 3 fence gates

There is around 70m of fencing in our backyard. Looking to install extend fenceline up 400/600mm and install 'lean-in' PVC piping with mesh to deter the dog from jumping. Materials supplied, just looking for labour.

Require relocation of retaining wall and colourbond fence due to encroachment onto neighbors property

Hi everyone I need a side gate installed to stop my dogs escaping. Doesn’t need to be anything fancy just something that will stop them escaping

Addition to cat enclosure involves fastening 7m x 1.2m Catnet mesh to house eaves on one side, to colourbond fence on other, extending to the ground at both ends with entry to existing enclosure at one end.

Need my fence (gaps) patched up to stop my puppy escaping to neighbour house, something like the picture I instal.

Hey everyone! Due to my house being newly built I need a really good handy man to figure out a way to stop my dogs escaping. My dogs are digging under the fence and getting out.

Some basic chicken wire fencing doing. One of our dogs has become an escape artist!

The dogs dig under the fence need some dog proof wire or something installed open to suggestions

Enclosure net, brackets and all other materials have been purchased just needs to be attached to the existing fence. The enclosure doesnt enclose totally as in roof. It is fence extension brackets attached to fence and then a wire netting put along the brackets to extend fence height. Most of the fence is wood, a small part is metal and an equally small part is brick. I have all necessary attachments bought with fence extension wire. I hope this helps. Approx 20 - 25 m In my head it would take 8 hours. I am happy to work as a side kick.

Glass pool fence and fixings to be moved to new location new footings will need to be done

Require an area of land to be fenced adequately enough for 2 protective dogs can reside within...

Pool lock needs to be adjusted; requiring new hole for repositioning to be drilled in glass gate or fence panel

I have the complete kit ready to install. It needs to be installed along one action of the rural chain link wire fence. Need to stop dogs getting into the neighbours property.

I need this section of garden blocked off, whether it be with star pickets and chicken wire or some other temporary idea. My dogs are constantly shitting in this section which is making it hard to clean up and attracting flies. Materials are not supplied but can be if you give me details, Bunnings is right around the corner. I’m down for ideas but it has to be temporary as this is a rental property and should be somewhat easy to remove. Just putting feelers out there for quotes so take make budget with a grain of salt.

I am looking to get someone to assemble a Colorbond gate kit (from Teamwork Fencing) and install it in place of an existing wooden gate (removal of old gate will be done by me). I have purchased the kit and have it ready for assembly. Please note that the gate posts will not be concreted in to the ground and therefore, will require cutting to size.

13 metres of 180cm tall colourbond (cream) on a retaining wall

One panel of colourbond fencing has come out of top and bottom rail as fence has leaned out. Panel needs to be fixed and bolted or pot diverted to shed to stop it moving again

Install standard colourbond fence as supplied 18-20 m relpacing supersix which has fallen over.

Dig footings and install x7 posts for colorbond fencing. I can supply colorbond fence posts and concrete.

Hey, I need to install about 20 meters long Colorbond fence at the rear of the house where some of existing fence was fallen down and been removed and some of it is still standing which needs to be removed. The old fence is cement sheet fence. Contractor must have public liability and workers compensation insurance before start the project.

Remove the gates from the front ( left and right) and replace it into colour bond fence with both the sides ( one side with lock). Pictures will be sent later.

Supply and install colorbond gate between laundry and backyard. Dimensions: 820 x 1770 Colour: Monument

Fence loose on join needs tech screws is onto of a lime stone wall quite high

Fencing upto 80m as per photos

Need a colorbond fence extension done. 50cm height; over 8.5 pannels.

Install PA gate with side panel - colorbond 1.8 high 1.7 width PA gate - approx 1m width Side panel- approx .7m width Belmont area

removal of 1 x pillar and wall section and replaced with colour bond fencing to match the existing colour bond on the neighbouring property. Skip bin and fencing requirements supplied by client.

Build 9m of colourbond fence. All consumables supplied and ready, 2bags of concrete per hole. All colourbond fencing on site ready to be installed. All 4 holes dug already to around 400-500mm might need abit more depends on height alignment of rear fence. Just have ran outta time and need it done to mark my boundary.

4.5m Hardiflex & 4m asbestos fence removed - replaced with cream Colorbond fence. Neighbouring strata need two weeks notice. Must have asbestos removal certification.

Screen line Fence extensions for Colorbond Fences are in a kit and on site (8 qty x 600 x 2350). All parts on site - need installation on existing colorbond fence. Colorbond Post - Post type F 8 X 2.35m fencing lengths. Job in Wembley - flexible on timing.

We are wanting someone to supply and install 1 x plinth to the bottom of our colourBond fence 2380 wide

I need reliable and highly experienced fencing guys to supply and erect panels of color bond fences on the border line with the neighbor in front of the plant and align with the current fencing. I need a quote first. Final price will be based on the quote. $10 is just a budget for sending the post based on the Airtasker minimum requirements.

Rusted fence post causing fence to Swing in the wind. Replace cream fence post and re cement in ground.

3 metres width Colourbond gate needs to be replaced with something less expensive. The gates are damaged. This area is prone to high wind.