Find experienced local fencing contractors in WA

We have a pets electric fence. We need to get somebody to make sure that the fence is free from plants. It's mostly fine -- I am showing in the photos the absolute worst bit. The job is to make sure that the fence is totally clear of plants.

Wanting a timber picket fence built to front garden. Approx 3.5m x10m x7m (including gate) maybe 1200 high? Want old school pickets. Empty yard so nothing to remove first. Open to suggestions. I’m happy to paint it myself once up. Thanks in advance. This is the house and yard with a suggested picture of the fence.

Need a new gate installed, preferably not wood. 1100 wide and 1700 high approx

Pull down and remove 6m of asbestos fencing and 1 lattice full height panel Install 6m x 1800mm high colorbond fencing using ally wall where needed for retaining. Fence to be installed between my unit and my neighbours in the back garden. Fence installation without existing asbestos fence removal can be quoted for, ie separating out the removal and installation.

We had a handyman build a fence and he was going to fix the gate but has become unwell so we need someone to finish the job! We need a garden gate fitted. We will source the gate, but not the hardware to fit it, so you’ll need to source brackets, screws etc.

I am looking for a handyman or tradesperson to install a self-closing spring or hinges and a latch on a garden side gate. Job details: • Install a spring for self-closing function on garden side door • Install/adjust hinges as required • Ensure the gate closes properly and aligns correctly prefer someone with Own tools and equipment.

Small aluminium fence with 2 gates approx 1200mm high x 2100 wide

One of my timber retaining wall posts has failed and needs to be replaced. I’ve already removed the old rotten post (see photos) and taken measurements to assist with quoting. Please: Supply and install 1 new treated post Secure post to support the upper sleeper beam and stop further collapse Must be structurally sound and weather-resistant Preference for someone with landscaping or carpentry experience

11m fence install. Already have the supplies.

Build a fence around veggie garden to stop dog digging holes! It is roughly 7m of fencing needed and no more than 1.5m high. Something super simple made of wood or pallets. Thanks

Install garden barrier to bottom of colourbond fence with tek screws. We have the garden eding and tek screws. Will need to difmf sand back from fence to install. This is a new build. Approx 24 metres.

I need 2 wooden slats reattached to my front garden fence.

For front fenced lawn, I need metal slate gate ( Matching slats). It will be 2 doors of approximately 1 meters by 1 meter.

- Ground is rocky and gravelly in some areas - Ground is hilly in some areas - Can be made how you like as long as it works and is secure

I need my garden gate replaced. Its a standard 90x150 arched timber gate. I would like you to: - Supply the new gate - Swap over any hardware from the original gate to the new gate - Hang the gate - Dispose of old gate

Colour bond garden gate needs lifting as it has dropped and is difficult to open. Scraps on the ground

Jarrah closed picket, wooden gate has been sealed and painted. No hardware or posts included. We need you to create infill for this to fit. Size of gate - 180cm x 90cm Size of gap - 116cm $200 plus costs

I need 2 x identical garden gates installed in my front courtyard. They are 1800mm high x 900mm wide & the wall openings are 1000mm wide, so will need timber to fill gaps (you to source & supply). I already have the hardware (hinges & latches), which also need to be installed. Require proof you've done this sort of thing before.

Hello I need some general gardening, installation of reticulation and also I would like wires to be installed on all my fences so I can train star jasmine.

demolish old brick cement rendered front fence and cement garden border ...remove all of the existing fence and footings. A skip bin will be available close to the fence being demolished for disposal of all relevant rubbish. Fence length approximately twelve metres and height ranges between half a metre to one metre. Width varies from ten to twenty centimeters The area will be free of any garden and hedge.

Needing an area fenced for dogs. Putting $123 for price as open to quotes. Open to both wooden and wire options.

We have a pets electric fence. We need to get somebody to make sure that the fence is free from plants. It's mostly fine -- I am showing in the photos the absolute worst bit. The job is to make sure that the fence is totally clear of plants.

Swing gate relocation (removal and install) to front fence + supply any materials needed for the job.

Drilling small posts into colorbond fence and then the oscillot rollers. 4 x 2m lengths.

I need urgent installation of the Oscillot cat‑proof fence system. Details: • Install Oscillot rollers around my Colorbond fence perimeter • Add one small inward‑facing net panel in a corner with tall vegetation • Minor gate tweak (small internal net square or inward cap) Please let me know your earliest availability — the job is time‑sensitive. Thank you.

I need a dog fence installed in my courtyard area (see photo attached with red marked section). Details: • Approx length: 6–8 metres (straight run) • Surface: paved/concrete • Height required: approx 90cm–120cm • Secure enough for a medium-sized dog • Would prefer black powder-coated panels (open to suggestions) • Must be securely anchored (not temporary plastic fencing) Please quote including: • Labour • Materials • Any drilling/bolting required Please quote total cost including materials and installation for approx 6-8m dog fence. Thanks!

New Gate and Fabrication similar to photo below look for measure and quote

I am looking for someone to supply and install a wooden gate/fence (custom built to size) in two outdoor areas of my property. This is not a decorative job — the main purpose is containment for a cat/dog, durability, and safe access. The $1200 budget is inclusive of all materials and labour. Area 1 • Total width: ~ 142 cm • Requires: Gate + fixed fencing • Height: ~180 cm • Minimal gap at bottom (must be pet-proof) Area 2 • Total width: ~ 253 cm • Requires: Gate + fixed fencing • Height: ~180 cm • Minimal gap at bottom (pet-proof) General Requirements Materials: Simple and durable open to suggestions. Finish: Doesn’t need to be fancy functionality over appearance Gate: Lockable or latchable Bottom gap: Must be small enough that a cat or small dog cannot escape Supply & install included Must be suitable for outdoor use I’ve attached photos of both areas for reference. I’m happy with practical solutions and open to suggestions that keep costs down while remaining secure.

In need some Oscillot cat fence toppers installed on about 15m of fence and on top of 3 fence gates

There is around 70m of fencing in our backyard. Looking to install extend fenceline up 400/600mm and install 'lean-in' PVC piping with mesh to deter the dog from jumping. Materials supplied, just looking for labour.

Require relocation of retaining wall and colourbond fence due to encroachment onto neighbors property

Hi everyone I need a side gate installed to stop my dogs escaping. Doesn’t need to be anything fancy just something that will stop them escaping

Addition to cat enclosure involves fastening 7m x 1.2m Catnet mesh to house eaves on one side, to colourbond fence on other, extending to the ground at both ends with entry to existing enclosure at one end.

Need my fence (gaps) patched up to stop my puppy escaping to neighbour house, something like the picture I instal.

Hey everyone! Due to my house being newly built I need a really good handy man to figure out a way to stop my dogs escaping. My dogs are digging under the fence and getting out.

Some basic chicken wire fencing doing. One of our dogs has become an escape artist!

The dogs dig under the fence need some dog proof wire or something installed open to suggestions

Enclosure net, brackets and all other materials have been purchased just needs to be attached to the existing fence. The enclosure doesnt enclose totally as in roof. It is fence extension brackets attached to fence and then a wire netting put along the brackets to extend fence height. Most of the fence is wood, a small part is metal and an equally small part is brick. I have all necessary attachments bought with fence extension wire. I hope this helps. Approx 20 - 25 m In my head it would take 8 hours. I am happy to work as a side kick.

Glass pool fence and fixings to be moved to new location new footings will need to be done

Require an area of land to be fenced adequately enough for 2 protective dogs can reside within...

Have a 1.8 metre boundary colourbond fence where 2 - 3 posts have leant over from strong winds. Is it possible to get them replaced only with SHS 65 X 65 galvanised posts and cemented?( 3 - 4 posts) The rest of the fence is covered between the 2 homes. Tasker to supply and install!

The fence post needs to be replaced due to rust

Pull down, remove and dispose of existing super six (non asbestos) fencing and replace (supply and install) with colorbond in classic cream. Side fence of 14m x 1800mm fencing with a single plinth. Current fence is partially down with remaining part leaning. Must be done before Friday 3 July. Will pay a premium for short notice. Appreciate if you can provide your quote to take this into account. Contractor to be fully licensed with ABN. References or reviews appreciated. Please advise when you can start and complete (sooner the better!)

The footing on the fence has sunk due to earth shifting. It needs to be raised and re cemented to be level. This will make gate close again.

I need an experienced fencing contractor to remove and relocate an existing Colourbond fence that is currently encroaching onto my property on Hidcote Way. Both neighbours have completed independent licensed surveys, confirming the fence is out of position. The correct boundary has now been identified and marked on site. Scope of Work: Remove existing Colourbond fence from incorrect position Reinstall fence along the new surveyed boundary line Re‑use existing Colourbond sheets (good condition) Supply & install 14 new steel fence posts Install a 300mm Colourbond steel plinth along the bottom to prevent soil wash-off Ensure fence is level, secure, and aligned with survey markers Remove any excess waste from site Survey & Encroachment Details: New boundary markers already placed Fence currently sits inside my property and needs to be shifted to the legal boundary Land is mostly level with no major slope issues Clear access from both sides Materials: Provided: Existing Colourbond sheets Required from Tasker: 14 new posts Concrete 300mm Colourbond plinth (preferred) All tools & labour Other Info: Neighbour is aware and has agreed to the relocation Flexible with dates - but must complete by 13.07.2026 Survey plans and photos available

New gate to be measured , supplied, and installed in new location at the side of the house to accommodate a caravan.

Hi, Seeking someone experienced to help with the following: - Remove 12m of damaged Hardifence - Replace 12m of damaged Hardifence with 1800m high matching Colourbond fence (e.g. Paperbark) - Remove approx 2m side panel fence (refer to picture) - Replace approx 2m side panel fence (refer to picture with blue circle around it) *Tasker to supply parts and labour. Tasker to provide invoice. If price is right and work is done well, I'll be looking to engage you permanently whenever items need fixing in the future - there's always stuff coming up that needs fixing. Cheers.

Looking for a quote for installing a colorbond fence roughly about 10meter,broken super six fences needs to be dug ,

Need a colourblind side gate. Supply and install.

In Balga Dismantle around 20 meters of wood fence and erect new , supplied by us , 29 m

pedestrian side gate mounted

Hi, Seeking someone experienced to help with the following: - Remove 12m of damaged Hardifence - Replace 12m of damaged Hardifence with 1800m high matching Colourbond fence (e.g. Paperbark) - Remove approx 2m side panel fence (refer to picture) - Replace approx 2m side panel fence (refer to picture with blue circle around it) - Trim branches of small to mid-size trees (about 3) along the fence line towards the rear fence (please refer to included pictures) *Tasker to supply parts and labour. Tasker to provide invoice. If price is right and work is done well, I'll be looking to engage you permanently whenever items need fixing in the future - there's always stuff coming up that needs fixing. Cheers.

2.4 metre fence posts. I need 4 replaced

I need a new side boundary fence supplied and installed at a residential property in Halls Head WA 6210. The fence is for the right-hand side boundary when looking from the front of the property. Details: Total fence length: approx. 30.5 m Fence height: 2 m - Transition to 1.8m height for front half of fence. Fence type: stepped boundary fence Site fall: approx. 4.0 m from rear to front Ground level: similar on both sides of the boundary Preferred finish: Colorbond / Trimdeck or similar Colour: cream or similar, to be confirmed Preferred base/retaining solution: plinths, ideally around 500 mm Preference is to avoid limestone retaining blocks if possible Please provide your price, availability, and whether you are able to inspect the site before confirming the final quote.

A boundary gate or wall or panel at end of private unit to close off from Strata/common area. Approximately 1.5 metres wide. Pic 2 shows clothes line in common property . Fence / gate needs to be at end of brick unit for safety and security.

Looking for someone to repair a section of my Colorbond fence. Two fence panels have come loose from the corner/post area and are leaning over. The rest of the fence appears fine – it’s only these two panels that need attention. The job will likely involve: Re-securing or replacing any damaged brackets/posts if required and Straightening and securing the two leaning panels so they are stable and level again.

I want to partially enclose my garage with one large colourbond panel in Grey Ridge. Supply and install needed, suggest site visit to confirm measurements etc. Solid brick wall to one side and post or similar will need to installed into concrete/paver.

I am looking to get someone to assemble a Colorbond gate kit (from Teamwork Fencing) and install it in place of an existing wooden gate (removal of old gate will be done by me). I have purchased the kit and have it ready for assembly. Please note that the gate posts will not be concreted in to the ground and therefore, will require cutting to size.

Install PA gate with side panel - colorbond 1.8 high 1.7 width PA gate - approx 1m width Side panel- approx .7m width Belmont area

We are wanting someone to supply and install 1 x plinth to the bottom of our colourBond fence 2380 wide