Find experienced local fencing contractors in QLD

Need to install a gate between the deck and the lawn. All measurements in the photos attached.

Hi. We need to get 2 swing style garden gates fixed to make them close properly again. I've attached photos. The screws holding the latch on one of the gates have come out so need bigger metal screws to re-attach the latch securely. The other gate I think just needs readjustment so that the latch clicks into place properly. Thanks, Wes

Please see the photos. 60m of boundary to be fenced by you. The ground is mostly flat but has a slight fall as shown by the contour lines in the drawing. I will remove the old fence, supply the timber sleepers for under the new fence, pay for the new PVC fence that you will order from the supplier of my choice. You will measure the job, order the fence materials from the supplier of my choice (which I will pay for and receive on site), install the new fence, and remove any leftover rubbish. This job can be conducted during weekdays but can’t be completed on a weekend. Successful bid will have experience with installing PVC fencing, and provide photos of their work. Thanks.

We are required to increase the height of our wooden garden fence to comply with swimming pool regulations. We will supply materials.

Fence repair Type of gardening: Other Size of garden: Under 50m² Has green waste bin: No

Fence assembly and garden labour.

Need a Hydraulic gate closer magnetic latch put on gate Mulch put on garden & glued Rocks on path glued Will provide materials

Wood garden fence - need 5 new uprights installed, have the poles and concrete, just need someone to install

Fix house garden gate which has broken off its hinges (needs welding) also need to trim the gate down (metal frame with wooden slats) as does not fit flush to side of house wall as gate post must have moved

I have the brackets and nails and net , wood fence, 3 sides, 1m x 2m x 6m . Need them drilled in and net installed on the brackets

I need someone to make and install garden gate/side gate. I have frame and wood plank. You will need to bring tools.

I need a ~3.5m wire fence (provided & image attached) to be installed in front of my garden bed (as per photo) to prevent my dogs (German shepherds - so it needs to be sturdy) from going in there. Provided 4x steaks, and dog wire fence 1200x50m (won’t need all of it). Tasker to have all necessary tools for this.

2 x side gates purchase and install Block off both sides of the home to keep dog secure $400+ materials you supply receipts for

Put up wood fence............

invite quote to build 10 meter garden edge

Dog proofing the front and back yard fit for a 11 week old kelpie collie. Will need completed: - yard scraped for anything he could choke on (previous renter has left cooked dog bones EVERYWHERE) - chicken wire/ some sort of barrier to be fixed around base of the house to stop him from getting under the house (photos for reference)

Hi guys, One piece of my raised garden retaining wall timber is rotten, and need replaced! Need you to source and replace for me. Timber size is 2310mm * 200 mm * 55mm Please see pictures

I have 5 posts I want cut and removed from garden . I want them cut at the bottom of the metal post so I can cover the ground with new stones.

Pour concret slab ( or a mix of slab and pavers ) to consolidate garden fence. As per the picture, the concrete around the fence’s posts is now above ground. I’m open to any other ideas. Please supply all materials.

Install 3x shapescaper garden edge steel strips along a small 5 meter colourbond fence: - grind the 3x steel strips to the correct lengths and cut out gaps where needed to make way for concrete fence posts. - screw the steel strips into the fence - bend 1x steel strip to form an L-shape between the driveway and fence post around the postbox I already have all materials (2x 230mm by 2400mm steel strip, 1x 150mm by 2400mm steel strip, stakes, screws). I have also already excavated the area so no need to dig or remove soil.

Broken Pool gate latch to be replaced. I have new latch on-site. 2 panels of glass fence to be relocated. Sprigs to be removed from current, part of deck to be cut and sprigs and panels to be re installed x 2 old sprigs and glass onsite on-site. Colourbond fence to be straightened. Tree has pushed fence. 1, possibly 2 footings to be re done. Need to use existing colourbond in place.

Fabricate and install a gate to fit existing front pine paling picket fence per photos. gate to open inwards. I have the paint to match the fence. I am also happy to paint the fence myself.

Looking for someone to install a temporary dog fence along a boundary line (approx. 30m). Job involves: Installing 16 star pickets Attaching dog wire with galvanised tie wire Slightly sloping boundary Fence needs to be secure for a medium-sized dog Materials provided: 30m dog wire 16 star pickets Galvanised tie wire You’ll need to bring your own tools/equipment (e.g. star picket driver, pliers, wire tensioning tools). Timing: Available anytime this week — would love this done within the next few days if possible, as I’m moving in soon and need the fence in place to secure my dog. Please send your quote and availability. I’m happy to assign the task quickly for the right person. Ideally looking for someone who has experience installing star picket fencing — Please only make an offer if you’re confident you have the experience and tools to complete this task. Thank you.

I have had 20mtr of fencing taken out by a tree and looking for someone that can re-errect the wire. The site is clear and poles are in. 20 mtrs of dog wire that will need a strainer top and bottom. Thanks

Temp fence put up with star pickets and chicken wire. 5m but it isn't flat.

Needing mesh installed on fence to stop dog getting out and gap filled

I have a deck with a railing around it. The original gates were removed some years ago, and since then a pool has been added. We now have a new dog and need new gates installed for safety and access. I’m looking for someone who can take a look, suggest suitable gate options, and then supply and install the chosen ones. There are two gates needed. One at the pool and one on the other side of the deck.

Roughly 10 metres of fencing to put up just 5 star pickets and wire not a big job at all. Just supply all materials (will cover cost plus job cost)

Bought wood fence: https://www.vidaxl.com.au/e/vidaxl-dog-gate-with-door-foldable-4-panels-320-cm-poplar-wood/8720845731823.html. Need it to be permanently secured to wall with screws. Over 388cm lounge width. + one other small section. So will need saw. And brackets/screws. & potentially 1 or 2 pieces of wood for join.

Fencing for god Bcc regulations

https://oscillot.com.au/ Fix metal Oscillot paddles to top of gate. See attached website

I need a new pool fence lock and fence to certify my pool.prior to house sale

Looking to have a pool fence replaced that has rusted out and damaged and also provide pool compliance certificate please!

50-60m chain link fence, 3 gates, some posts, mostly star pickets

Hi, I need a small fence built between the wall of the house and the fence to block my dog from escaping out the front yard when we open an electric gate. I have tried dog proof chicken wire fencing MDF boards, bricks and he’s managed to dig under parkour over or bite through. Could be a gate built out of wooden pallets or fencing wood from Bunnings but just something to keep him in that is sturdy movable at the end of lease and tall. The dog is parked kangaroo.

Looking for someone to apply enduro shield to 20 glass panels plus pool gate. Product is supplied. Ladder will be required for back of fence as is 2 metre high approx

I'm looking for quotes to temporarily fence a rear yard in Sarina Beach to keep dogs secure until something more permanent can be built. Price negotiable.

Re attach Drop Rod and repair Ground Stopper/Catcher of a gate

2 x side gates purchase and install Block off both sides of the home to keep dog secure $400+ materials you supply receipts for

Fabricate / Weld custom site access frame and gate as per attached design. Supply all materials. Steel to be HDG Please discuss with me suitable steel thickness before build. Gate to swing both ways

59m side and back fence stepped down within boundary (i.e. not on boundary) as highlighted in attached survey. Plinfs with no gaps. Required asap for sale of house. Monument panels to match other side, pretty sure its lyasight saw tooth. 2m high preferred for north boundary. Ok to reduce height in rear boundary if cheaper, as long as it covers neighbours fence.

Hi, I’m located in Thornlands and would like an onsite quote for one side Colourbond fence plus two gates. Could someone please attend site to measure and provide a formal written quotation including supply and installation? Thanks.

I have bought the colourbond fence from STRATCO, I just don’t have time to install it. 20LM of fence. Post in ground. No retaining wall or problematic ground. I will remove the old fence prior to install.

Approx 70 m colour bond fence 1800 high , land sloping from back to front posts to be concreted in , also Timber paling fence 1800 high 2 double gates 3600 wide 2 single gates plus approx 15 m of panels , some posts fixed to concrete other posts to be concreted , owner will supply material all materials required and can assist, contractor to prepare material requirement list for purchase , so site visit will be required contractor to supply all tools and expertise

During concreting work, my colorbond fence was removed, need help with refitting back

Need colouring fencing around the current block in forest hill with budget of 5k

We would like a quote to install a colourbond fence approximately 34m alongside the timber fence. Agreement reached with neighbour as the current fence is not on the boundary. Would like the fence to be installed as soon as possible.

Need a double gate installed to gain access to the back yard

Colorbond fencing, remove old timber

Colorbond fence, 18 metres, 1.8 high. Old timber fance need to remove. 9 posts already there

Inspect, quote and install a colourbond fence.

I have purchased 2350x600 fence extension panels (3) for my Colourbond fence. I just need the installed. https://youtu.be/KXb_rdje5TY Ideally Wednesday or Thursday this week.

Footing of a colourbond fence was accidentally excavated, when backyard was excavated. Fence is now beginning to lean for that one fence panel, need footing replaced underneath artificial turf. Please include cost of materials in the quote.

Looking to get colorbond fence and electric gate supplied and installed in my front yard, also old fence removed. Pic attached for reference of measurements

9.6metre colour bond fence to be put up

Our Colour bond fence is in good condition, however the metal that goes into the concrete has rusted, we need a quoted for the repair on 4 or 5 supports to be sorted

Need colourbond fence to be done on top of retaining wall, it is 19.5m long, fence is already on-site, just need help or someone to do it for me.please

I need an experienced handyman or fencing specialist to repair a section of my Colorbond fence that has become wobbly and is currently leaning. The Problem: • One of the main fence posts has lost its stability where it meets the base. • The post appears to be bolted into a concrete sleeper/base, and the connection has loosened or the base material has shifted. • The fence line is visibly leaning Requirements: • Assess whether the post needs to be re-bolted, reinforced, or if the base requires stabilizing. • Straighten the fence line so it is level and secure. • Supply any necessary heavy-duty bolts, brackets, or concrete/filler required for the fix. • Must have your own tools Can share the video for more accurate quote

Fence needs to be resecured with screws and gate hinge reattached/reinforced,

Need to fill the gap under a Colorbond fence (approx. 12m) Material to be supplied. Please visit the site and provide a quote. Thank you.