Find experienced local fencing contractors in Outer South West Sydney

Build a basic fence around my veggie garden to prevent deers and wild life eating the produce

21.5 in Length Need new metal posts with timber sleepers

Roughly 20 meters of cyclone fencing that needs to be installed with a gate. Will need top rail and bottom rail. Black coloured fencing.

Installing temporary fencing panels (provided) in a garden bed at a golf course to act as a dog enclosure for the golf course guard dog. Must be installed extremely securely and neatly so that it looks strong and level. Need it done asap. Today or tomorrow.

Install the wire for a Pet HQ electric dog fence around the perimeter of the property and have it working properly. The property is one acre but not covering the whole property. We have plenty of wire but some of it has been cut so needs to be rejoined. Don’t need to be electrician to carry this out

I need 1 panel replaced on colorbond fence

We have a 6x2 m dog run that needs the wire installed on the frame, and a gate. The frame is built however it needs a few bracing pieces screwed in. All material and screws available you will just need your tools.

I need the 2 sheets of colourbond fence to be taken down. There is a pole inbetween that is cemented in, that needs to be removed and replaced with a new pole re cemented in again. Im unable to get to the hardware for the pole and cement so i need those supplied. While the fence sheets are down i need a caravan to be moved the short distance from outside the fence to inside it so im looking for someone with a vehicle able to do this. Its quite large approx 2500kg 9 metres long. There may be a short wait after the fence is taken down while the caravan arrives but im trying to time things together, it will be delivered around 4pm

I have a colorbond fence panel thats blown out in the wind, i need it replaced into the railing

Dig 8-10 holes, cement in posts. Install rails,sheets and a gate, using secondhand materials, to erect an animal enclosure attached to an existing enclosure. Fence needs to be flush with ground.

Remove 15 metres of old wooden fence. Install 32m of Colorbond fencing in a straight line. Must be experienced with fencing and offer guarantee.

The picture below shows there has been a seperation between the gate and fence post to which the gate latch is attached, resulting in no contact and therefore the gate not able to be secured.

new colourbone fence and sleeper underneath 1800mmfence and 200x20 sleeper total 117 metres Left 46.5m, back 22m right 48.5m not needed for about 5-6 weeks as building, but need quotes to send to neighbours for approval to pay Appin NSW

Retaining wall and the posts are already done. Just needs to stand two posts only. Needs to buy colour bond fence and install, plastic caps for the existing posts and need to cut them from the top as per the 1.8 mtr height. Please see the image for further reference.

We’re needing our colour bond fence in the front yard to be converted into a gate with a lock. Preferably we’d like a security lock, but wanting quotes for both a security and normal lock.

the fence between me and my neighbour has collapsed. My mother is a pensioner and needs the most cost effective solution. - Due date: Flexible

Install sliding gates, automatic gate opener and Color bond fence

Colorbond Fencing (beige) and gate repair works. 1) New 3.1m wide x 1.8m high fence panel to be supplied and installed. 2) New fence panel 2.8m wide x 1.8m highincluding a small gate opening 0.6m widex 1.8m high . Fence panel and gate combined width is 2.8m wide (supply and install) 3) Gate adjustments for 1 off x 2 door gate and 1 off 0.6m x 1.8m gate to close the gap as shown in photo. 2 locks for the 2 off 0.6m x 1.8m existing gates to be replaced

Need 2x Colorbond gate 1.8m High 1.4m width and 1.8m High 840mm width. Color monument with lock.

Need about 12 m pool fencing with two gates and. About 9m colour bond fence with one gate

Need to remove old wood fence and replace with color bond fence 1.8 mt high. Need quote.

Need to fix a side colour bond gate , back yard gate and backyard colour bond fence

Need Colorbond gate 1.8m High 1.4m width. Color monument with lock.

I bought lock , need to install in my backyard colorbond fence gate . Attach picture

Quote to remove damaged fence post attach panels to new post and reset in footing. Will require post hole to be cleaned out for new concrete footing. See attached photos. Posts and quick set concrete supplied so price for labour only please

I need colorbond fencing on 2 sides of my house. Both sides are roughly 31 mtrs. I need fencing sitting on two sleepers on one side. The post for fence are approx. 2 mtrs apart. Also, they already have concrete sleepers. Just need to add two timber sleepers on one side.

I need to raise the height of one side of my Colorbond fence by about 40 cm for privacy reasons. The section is approximately 8 metres long, and I’ve attached a photo of the area that needs the height increase.