Find a fence installation professional in North West Perth

Need side gate for house installed, price negotiable

Install a standard single colorbond side gate with D latch. Width is 1110mm. Colour will be advised. Post will be needed. Fence is colorbond. Will need invoice with gst

Would like a wooden gate made and installed. 1st pic is current gate, second pick it’s essentially what I’d like the gate to look like. Third pic is the spacing I want between the wooden slats (about 5mm). Dimensions are 1700mm tall and 1200 wide. Ignore price and send me a quote.

Need a 1.8 x 1.2 m soakwell install with grate in a common driveway. The current driveway in roadbase.

Need colour bond fence installed of 1.8m, with plinth/blocks underneath. Just one panel and New post required.

install about 45 meter collarbond fencing and 3 standard gates. in Nollamarra

Hi all Need old asbestos fence removed in legal way and replace with colour bond fence as pictured. There is 7.5 metres of colour bond that needs to be installed. Normal height please. Cheers

Install 4 plinths to the existing colourbond fence. Plinths will be supplied already

here looking for quotes supply and install aluminium slat fence in Yanchep today. Needs Any fencies or handyman. Fence panels is probably easiest.. 1.8m high preferably Aluminium 90mm wide slats dark grey, basalt, etc. open to ideas. Has to be privacy fence/screen Ssmall gaps between slats is ok.Hot me up with your quotes. Used fence is cool too.

Replace pool gate lock - not automatically latching

Install 1800mm high aluminium slat gate (monument colour) into side opening of house. Opening width is 1760mm. Will need posts concreting in as one side is weatherboard the other side is fence. Either 1m wide gate + infill or full sized gate, whichever is cheaper. Happy to accept either supply+install quote or labour only if advised what to order.

Install Colorbond fencing. Approx 6mtrs by 1.8 and taper down after the garage. As per pic Approx 24m by 2 2m high from the back wall to the garrage. Ground is soft sand as per pics.

I need a plinth fitted to the bottom of my colourbond garden fence. It’s around 2.5m long and I have already bought the plinth so I only need it to be installed. The fence will have to be lifted in order to fit it underneath and there is an artificial hedge attached to the fence (see picture).

The front wooden gate has been broken where the closing latch is. We need the gate either repaired or replaced. Getting it replace is probably the better option. The gate would also need a new closing latch and or lock. It might need some extra wood on the side to close up any gaps.

1 stirrup footing and post needing to be replaced and possibly a second post? A quote on replacing some polycarbonate sheets would be welcome too.

3-4 fencing panels were broken in recent storms. I don't know if it Hardy or Colourbond fencing. Therefore new panels are required and their installation.

Could i pls get a quote for a bball ring installation with conc foundation

The top panel fell off and needs fixing. Might also need wood replacement in the same color shade. Please check if the entire wood fencing would needs to be replace. If it can stay as is then just fix, if not please quote for the whole job.

Install frameless batten fence panels on top of rendered brick wall - 27 metres. I have 20x1.405 m panels, 122x10mm threads, 122 nuts, 8x 280ml chemical anchor tubes. 17x of the panels can be installed without cutting. There are 2 corners that will need to be cut and the two ends will need to be cut to size. Installer will need experience and all the equipment for drilling (wall and panel base) and cutting panel base.

Bought a gate latch from bunnings. Just need to replace an existing broken one.