35 Fence Installers in Sydney

I need a gate for down the side of my house a Wooden 6 ft picket gate and little bit of fencing . All up Approx 9 metres across

Materials supplied Ready to start today or tomorrow Overall width is 3.3m, height at back side (against fence) 1.5m, height at front side 1.0m (root panel will be sloping - Require hinged top section for access and 2 x hinged doors on front side - Require pine wood frame secured to back wall fence and ground for stability - bunnings stained pre-fab gates to be used (see picture) for the paneling - size of gates are [Content Moderated] x types of frames shown - not sure what is best suited for the application.. to be discussed - materials will be supplied by me from bunnings (bunnings Eastgardens is 1 min drive from my house)

The fence post holding up a latice fence has rotted through and the fence is leaning. It is only the top half of a concrete fence. There appears to be a steel pole attaching the wooden post to the concrete part.

Build a pole and wire fence at the end of my front deck - just 1.5 metres long and 1 metre high. Hardwood vertical beams and top rail. I can order materials or you can supply. Must be a quality job with attention to detail. You'll need carpentry skills and the right tools. Ideally you'll have fence building skills & will have built a pole and wire fence before. Must be compliant. Will need 13 horizontal wires, evenly spaced. I have existing pole and wire fencing in backyard but just need this small length in the front because the drop is greater than one metre.

either repair or replace 32 metre timber fence its very old its leaning on one side price to 1) repair to best ability and replace trestle 2) replace with timber fence 3) replace with colourbond fence

Approx 6 metres of colour bond fencing to be covered by fake hedge screening. Hedging only supplied.

Need two gates put back up on the side of my house. 1. Have existing little wooden gate, just needs to be drilled back in the wall maybe replace one of the slats. 2. Have existing gate but need to build a 700mm timber wall to replace a brick wall that was removed. (Pictured) Will pay for materials needed on top of budget agreed.

Wanting to build a vertical timber extension on my brick fence. Approx 7ft x 7ft.

Put up and secure a gate. Getting a dog and we need a gate for security. We have all the parts; Post, gate and hinges!

One side only; full width 16m Old timber fence needs removal Quakers Hill Location Please provide indication of total cost

Measure, Supply and Install Vertical Aluminimum Battern Screen and Gate. Approx 3 high x 3m wide with a large gate ( at least 800mm wide). 45mm square batterns with approx 10mm spacings. To comply with DA requirement on project to be 1750mm above ground floor level (approx 3m from courtyard lower floor level) with no less than 25% open area. Finished in Black or Monument powder coat. Prefer gate to be full height. Will require sturdy fixing to the existing concrete slab. Gate to open fully turn back and sit flush with privacy screen when fully open. Include Lockklatch 2 way magnetic gate lock. Also require front timber slat fence or similar. Not required at this stage but will consider doing at the same time or at a later date if there is cost-benefit. Refer to attached pictures for information on suggested design. Site visits can be arranged most weekdays during business hours. Call with any questions.

A temporary fence 5 meters x2.7 meter high needs to be installed in Tempe. Material etc to be discussed. Wood fence.

Purchase and Put up a 17m colourbond fence with gate in duplex backyard, 3m is concrete the rest is grass

Need to build fence approx 10 mt length, any type of fence, which is cheap n best

I would like to replace existing fence with two gates . I’m not sure if the existing can be used /modified or not or if you need to replace. The width of the existing space is 3500. One side currently has fate but the other side is fixed. I am in Northmead.one gate already exists it’s the other fixed side that needs modifying.

Supply and install perspex barriers for two courtyard gates. Barrier need only be half the height of the gate to stop my dog from slipping through. I want it to be transparent so she can still see out. Property is a rental so will not be able to drill into gates.

Note - To Be Done in Feb 2020 - Airtasker website does not allow 2020 dates yet. I need to replace the fences on both sides of my terrace house in Newtown. One side is 1418cm, the other is 1065cm in length. Construction is galvanised steel poles into the ground and lapped and capped treated plantation pine, at the standard height of 1.8 metres. To be done in February, 2020

I have 15m of glass pool fencing I need installed around my 4.6m above ground pool which has been approved by council. Need someone who has experience in installing glass pool fencing as it has to be installed properly & be compliant as it will be inspected after. I have all the plans from council showing the exact location of where the fence needs to be installed. Looking to have this installed Friday the 8th or Saturday the 9th.

Need a handy man to put up timber beading to cover gap between the awning and brick wall (approx 17m long). Need to install a new timber post for front awning in place of the old one and put timber beading around two timber posts on the back patio. Photos are attached. We will provide beading and timber post. You need to provide the rest. The job is for this Saturday.

Dismantle and tip old fence. Erect new colourbond fence. 2400mm high Roughly 9 to 10 metres long. Gate is 2x 2400mm length panels 4 new posts to be cut into concrete