Find a fence installation professional in North West Perth

Looking for an experienced handyman, fencing contractor or pergola/shade installer to help install 8 steel posts around a pool in Sorrento. The posts and holes are already prepared: * 8 × 90x90mm powder-coated steel posts * 4 posts each side of the pool * Posts are approx. 3.2m long, with about 1m going into the ground * Holes are already dug, approx. 300mm wide × 1m deep * Posts need to be set straight, level, evenly aligned and concreted in I’ll arrange a Concrete Taxi with approximately 0.5m³ of concrete. They mix onsite and include 45 minutes onsite, so ideally everything would be positioned and braced before they arrive so the pour can be completed efficiently. I mainly need someone with experience setting posts accurately who can help with positioning, levelling, bracing and the concrete pour. All steel and concrete supplied. Located in Sorrento WA 6020

I need an experienced fencing, pergola/shade-structure installer or capable handyman to accurately set and concrete 8 powder-coated steel posts around an existing pool in Sorrento. The budget/offer is for labour only and doesn’t include concrete. I’m aware this will be an additional cost. The preparation is largely done: * 8 × 90 × 90 mm steel posts, 3200 mm long, already supplied * Posts to finish approximately 2200 mm above ground / 1000 mm below ground * 8 × approx. 300 mm diameter × 1000 mm deep holes already dug * 4 posts each side of the pool * Each row is 5 metres long, with approximately 6.7 metres between the two rows * 2 × 5 m horizontal steel rails are also onsite and can be used to help establish accurate alignment * concrete can be arranged. The main job is to: * accurately set out the posts * ensure both rows are straight, parallel and square * get all 8 posts plumb and at a consistent finished height * securely brace them before the concrete arrives * assist with placing/rodding the concrete and rechecking alignment during the pour No post-hole digging, welding, electrical work or paving required. This needs someone comfortable with precision steel-post installation, not simply filling holes with concrete. Please mention relevant fencing/pergola/shade-structure experience and whether you can supply the temporary bracing/set-out equipment required. Location: Sorrento WA 6020.

Looking for a handyman or fencer to install approx 280 metres of 120cm high mesh onto an existing boundary fence across three sides of a property (Southern, Western, and half of Northern perimeter). The Setup: • Materials: All mesh rolls are already purchased and on-site. • Existing Structure: The fence is in good condition with a mix of timber posts and steel star pickets. It already has a 900mm mesh fence with two plain wires above it (the top wire sits perfectly at 1.2m high). • The Job: No heavy wire tensioning, post-digging, or concrete pouring required. You just need to unroll the new 120cm mesh, hand-stretch it taut to prevent sagging, and fasten it to the existing structure, timber posts, and top wires.

To replace the broken lattice panels with the new ones

Electric Double Swing Gate Install. I have 230V at the gate already for the control panel. Don’t have any of the parts or know what to get

I'm looking for an experienced tradie or fencing contractor to supply and install a side fence and gate at my new residential property in Eglinton, WA. Project Specifications: Location: Eglinton, WA Opening Width: Approximately 1.75 metres Height Required: 1.9 metres Scope of Work: Supply all necessary materials (posts, framing, panels/slats, gate, hardware, etc.) and complete the professional installation of the fence and matching gate to secure the side access of the house. Please see the attached photo showing the side passage/opening space where the work needs to be carried out.  When offering your quote, please let me know: 1. Your total price (including supply of materials and installation labor). 2. What style/material options you recommend or provide. 3. Your earliest available start/completion date. Thanks!

I'm looking for someone to install a gate, similar to the one in the neighbours photo, dimensions are in photos, would be 1.33m by 1.2m.

Looking for someone to install a mesh barrier along approximately 12 metres of our existing metal fence to prevent rats getting underneath. Work required: * Dig a continuous, narrow trench approximately 200mm deep along the fence. * Install the supplied mesh against the fence, extending at least 200mm below finished ground level. * Secure mesh every 300–400mm and at posts, corners and ends using suitable corrosion-resistant fixings. * Overlap mesh joins by at least 150mm and secure firmly. Close gaps around posts, ends and uneven ground. * Fold or cover cut edges so no sharp wires or fixings are exposed. * Backfill with the supplied gravel and soil, compact and leave the area neat and stable. * Remove offcuts and clean up on completion. We supply the mesh and gravel. You must bring all tools, including a trenching shovel, mesh cutters and drill, plus suitable screws, washers, clips or ties. Access is through a garden bed with established palms and plants. Care is required around roots and irrigation, and to avoid damaging the fence. Please check the attached photos. Preferably completed within the next two weeks; flexible on the day. Please include labour, fixings and any additional materials in your offer, and confirm your availability.

Hi, we are looking for a reliable tradesperson to supply and install a gate to close a gap between our house wall and the existing fence. Task Details: Gate Installation: Supply and install a gate to close a ~2m wide gap. Site / Materials: colorbond to match fence colour Additional Quote Requested: We would also like a separate estimate/quote for installing an extra fence panel on top of our existing retaining wall while you are here. . Thanks

Replace current balustrade with a new aluminium balustrade with vertical slats, at the front as well as side balustrade. All pieces to be in surfmist colour

Source and installing security gate

Need to design and install fence or gate for dog near laundry Photo provide regarding area If want can come and take dimension Roughly 1-1.2 m width and. 1.5 m height

The security gate securing a loading dock door is jamming. We think a truck has bumped it and damaged the gate and tracks.

I need a 5 meter pool fence with one gate Photo with a chat gpt design for reference

6 1200x1200 glass panels 2 x in ground(block) saddles per panel(required) Limestone boring (50mm) required Chemical-Set adhesive binding

approx 25metre fence of aluminium slat fencing to front house including a gate

Need gate fixed or replaced

Supply and install of a garden fence and gate

Wood panel fencing replacement. Open to offers.

Fence is damaged from the corner and needs to replace or repair. I can show in the pictures. I guess you may install just post along the fence. Basically post is damaged.