Find a fence installation professional in North West Perth

Seeking a qualified and experienced fencing contractor or metal fabricator ONLY to supply, fabricate, and install a custom double swing gate. Applicants must be both qualified and experienced – no general handymen. Opening Details: Total wall-to-wall opening: 4033 mm Gate Specifications: Double swing gate (2 leaves) Each leaf approx: 1882 mm wide Overall height: 1700 mm Steel RHS frame construction Design Layout: Bottom section: 1100 mm solid infill Top section: vertical slats Slats: 65 mm wide with 50 mm gaps Approx. 15 slats per gate leaf Colour / Finish (Required): Frame: Black (powder coated) Slat inserts: Grey Council Compliance (Mandatory): Must comply with City of Wanneroo requirements Maximum 1200 mm solid from ground level Minimum 50% visibility above 1200 mm Contractor responsible for ensuring compliance Clearances: Hinge clearance: 25 mm each side Centre gap: 20 mm Bottom clearance: 50 mm from ground Scope of Work: Supply and fabrication of gates Supply and installation of: 100 mm steel posts (2 required) Heavy-duty hinges Locking system (manual latch/lock) Full installation, alignment and adjustment Budget: $3,300 total (labour and materials included)

I’ve purchased a readymade aluminium slat gate and am looking to install it. The gate comes with all fittings and will be installed in the same location as the existing wooden gate, which will need to be removed as part of the job. Looking for someone with experience installing gates who can ensure it’s aligned properly, secure, and working smoothly.

I am looking to get someone to assemble a Colorbond gate kit (from Teamwork Fencing) and install it in place of an existing wooden gate (removal of old gate will be done by me). I have purchased the kit and have it ready for assembly. Please note that the gate posts will not be concreted in to the ground and therefore, will require cutting to size.

Install new gate latch 10 minute job

Remove old broken latch and install new

Dig footings and install x7 posts for colorbond fencing. I can supply colorbond fence posts and concrete.

Supply and install colorbond gate between laundry and backyard. Dimensions: 820 x 1770 Colour: Monument

One of the wooden gate posts has termites ( now treated) and needs replacing with another wooden post.

Install wooden side gate with post

Replace 4m of short colorbond fence which is corroded and leaning. Good access both sides. Fence colour and profiles to match existing.

Supply & install gate, fix to wall.

I need a dog fence installed in my courtyard area (see photo attached with red marked section). Details: • Approx length: 6–8 metres (straight run) • Surface: paved/concrete • Height required: approx 90cm–120cm • Secure enough for a medium-sized dog • Would prefer black powder-coated panels (open to suggestions) • Must be securely anchored (not temporary plastic fencing) Please quote including: • Labour • Materials • Any drilling/bolting required Please quote total cost including materials and installation for approx 6-8m dog fence. Thanks!

Seeking quotes for supply and install of fence, to enclose front lawn area, and timeframe of when you could start and how long it will take from deposit to completion (Innaloo location). Project details: • Approx. 16.5 linear metres total (7.5m + 4.5m + 4.5m)
• 1.8m overall height
• Aluminium slats only (no masonry)
• Comply with City of Stirling requirements (ie: 50% visual permeability, 4m setback)
• Large verge tree near fence line (may require consideration during installation) Open to suggestions for alternate materials, colours etc. Have attached sample photo of to show rough idea of what job involves.

Install espalier trellis on 10m colorbond fence. Person must purchase supplies.

Wood is rotting. Repair/replace top portion with of wooden lattice

Hello, I am looking for a tradie to install a pool fence (see pictures below) in my house outdoor area. The pool fence should be installed between the garage and the grass play area to prevent my kids going into the garage. It's 2 pieces of fence with a gate. The gate will be fixed in between the two pieces of fence and the two pieces of fence will be fixed to the wall. Measurement is 5.4m. I have already bought all the materials needed. Now I just need a tradie to install it for me. I don't know the prices so I've just put $10. So you're free to give me your offer, thank you

Replace the current asbestos fence with 2.4m colourbond fence

3m access path to have a diy double gate kit installed. One post on wall, other attached to fence with brackets. Ready to go from mid morning this Thursday. All materials will be supplied

Gate hinge has seized up/locked and WD40 not helping budge. Need both hinges replaced as we currently can’t open the gate.

Looking for a quote for supply and install of aluminium slat gate as per drawing attached.