Find a fence installation professional in Parramatta

Looking to get a quote for a gate to be supplied and installed. There's a decent number of obstructions around the place, but hopefully it should be doable. Preferred style would be to have a single swing gate for cars and a small pedestrian gate, which would bypass most/all of the obstructions, but open to alternatives such as double swing gates or sliding gates depending on cost. 'Happy to provide more detail as needed. PS: Site is currently lawn, but is scheduled to be concreted over in early August. Please advise if install is preferred to be done in lawn or concrete. Second task: I have an existing gate that needs to be removed temporarily for the concreting work I have planned, and to be reinstalled after. Please see pictures for details.

Job Details: • Fence 1: Straight panel, approx. 1.5m wide • Fence 2: L-shaped, approx. 2.4m x 1.2m • Each enclosure needs one entry gate • Must include painting/staining in light natural timber colour (we can provide paint/stain or reimburse if needed) • you need to buy materials • Installation to be done at our premises (address will be shared with the assigned Tasker) Requirements: • Experience with timber fencing or carpentry • Must bring your own tools • Attention to detail and clean workmanship • Must complete both enclosures securely and safely for pets

quotes on an official quotation form from contractors with active ABN and fencing contractor licence numbers noted. A licence is required. Quotes must contain the following itemised pricing information: Length of fence to be replaced/repaired Dismantle and disposal costs Height of fencing material to be used, i.e 1800 mm Type of material, i.e. colourbond Cost of sleeper or retaining wall components (if applicable) Cost of clearing vegetation – private owner side (if applicable) TASK1: Remove old wood fence and dispose and install new colour bond fence one side only (approx. 40 meters in length) seperate quote required for this as it is a shared fence. Task2: 2 x access gates in colour bond fence Task3: Install new front fence colour-bond panels with double driveway rolling access and gate (approx. 20meters) Task 4: install colour/bond swing gate (approx. 3.6meter length)

colorbound ferce and gate

Installing a wide slatted aluminium gate - monument colour, for the side of the house. Gap is 1580mm, height 1500mm-1800mm. Attach to house/concrete on one side - will need a post set on the other side (200mm gap between concrete and existing fence).

Slat Gate replacement slat

Need to remove it and reinstall it properly with cement

I am looking to replace the existing gates at my property and would like to proceed with a slat-type design in a colour similar to the current gates. Please provide a quote for the supply and installation of the new gates. I would appreciate it if you could get in touch with me at your earliest convenience to discuss the job in more detail and arrange a site visit if necessary. Thank you

I’m a metal fencer who needs an experienced installer to assist me with installing metal fences and gates Task: - Digging post holes with post hole digger - Mixing cement - Installing posts and fence panels - Lifting & handling Paying $300 per day. $320 per day (if you have your own tools) Must have own vehicle

I have a pre existing small fence on my porch, I require a new fence to be installed. I will provide all timber

Replace part of the retaining wall near exit gate with concreate sleeper and metal post to create widen exit passage

Need a 20m colorbond fence installed and with 2 gates. looking to separate house and granny flat

Supply and Build a colour fence about 19 linear meter. I will remove the existing fence ready for you

Need a quote for supply & install

I am looking to build a dog house like this

Install 5m of timbers under fence. Removal of fence and reinstall aluminum fence with sleepers underneath to prevent pet access.

Replacement of 13 meter brushwood fence. Would consider brushwood or bamboo

Old fence is rotten in places. Needs replacing Wood or metal. Keen for the cheapest option.Aprox 6 metres

2 fences got damaged and need to be fixed.

Install post in ground. I already have the post and a bag of quick cement. You will need to dig out the concrete where the previous post was and put this one in.