Find a fence installation professional in East Brisbane

Need some pool fencing and pool gate installed. Post will need to be concreted into grass. Approx 3m long

We are looking to do a fence extension and What we are preposing is raising our rear boundary fence and the side fences into the first post. The fence line is currently at 1.8 Metres off the ground and we are looking to extend the fence with a colour bond extension kit. The new fence height will be 2.4M from the ground. Our reasons for this is we back onto a council walk way and currently everyone who walks past looks straight into our house. I have attached our plans for what we are wanting to do. We need a building certifier for this so we can get it all approved with council.

Two gates approx size length 5 and 10 feet’s

Wanting to get a picket fence installed in my front yard. 3 post are already in would need possibility 2 more put in. Roughly about 1.2m high with a gate if possible. About 15m in length

Small garden is sloping so need steps and fence needs a post reinforced

Please quote - We are looking to install outdoor panels / cladding onto our exisiting wall. We will supply 60panels at 2.9m x 219mm. Need to create a frame/bracket on existing wall and cut panels to size, install on wall Wall size Dimensions are - Pool section 1.9h 5.2w Right side 2.2 h 5.2w

To replace 4 timber posts (200×75mm) on the retaining wall.

1 Replace a section of the existing beam with a new 3-meter-long hardwood. 2. The section is about 3 meters long, 200mm high, and 80mm deep. 3. You would need to drill a hole/holes to attach it to the existing pole with a new long bolt. 4. I will reimburse any material-related expenses but not the tools.

Install and supply Colorbond fence to side and back of house .plus remove old wooden fence and small spa

My front fence is colourbond - woodland grey. Two panels need replacing that have discoloured due to not being genuine colourbond steel. I would need the below completed as part of the price of the job: 1: site inspection to confirm panel size and colourbond style 2: purchase of the two panels. I believe they are sawtooth infill from Oxworks 3: Installation of the two panels Panel size 1: 3190 w x 1770 h Panel size 2: 2370 w x 1770 h See attached photos

Supply and install colourbond (monument) side gate to side of property (between house and colourbond fence). Distance is 122cm. Also supply and install colourbond fence section on other side of property 57cm wide between house and existing colourbond fence.

Removal old and install new fence + 2 gate + 1 pedestrian gate

Standard aluminium pool fence around above ground pool. About 15m length. 13 posts, 2 gates. We can provide materials, or you can. Some minor stepping required as site is sloping mildly. Quoted budget is for labour only. - Due date: Before Sunday, 10 December 2023

Replacement of two timber retaining wall posts

Needing a new electric gate supplied and installed. Looking for a gate that is full privacy eg colour bond. Currently have an electric gate but foundation of motor needs to be fixed.

Replace old timber fence with colorbond

Removal of 7.0m x 1.5m wooden paling fence and replace with 7.0m x 1.8m wooden paling fence

As per picture, need to remove existing panel and replace with pool gate. I'll pay for pool fence gate. Require Installation - Due date: Flexible

1-2 house boundary posts need replacing & a few palings need to be nailed back or replaced - Due date: Flexible

(Quote) Looking for someone to install 29/30 mt fence , in colorbond , I can buy material or you can supply, I will post some photos later on , thanks - Due date: Flexible