Find a fence installation professional in Ipswich

I need x2 gates built out of timber on each side of the rear of the house. Straight forward gate with a latch nothing fancy just to keep dogs in. Dimensions: First photo: 1250 wide 1700 high Second photo: 1600 wide 1800 high

To source and install glass pool gate - aluminium post light glass gate to match existing. The measurements are at the narrowest 109-110cm. Pool fence is 125cm ground to top of the glass - 122 cms glass height

I’m looking for someone experienced in installing climbing-plant/trellis wire supports on a timber paling fence in a raised garden bed. The garden bed is approximately 8 metres long, but the climbing plants will occupy the central section only, as mature shrubs will be planted at both ends. I expect the vine support to be approximately 5.5 metres long, subject to final measurement on site. The support is for 3 climbing plants (2 Hardenbergias and 1 potato vine/Solanum). I’m looking for a neat, durable system using approximately 4 horizontal runs of stainless-steel wire, at roughly 40 cm intervals up to about 1.6 m high. Ideally, the wires should sit approximately 4–5 cm out from the timber fence rather than directly against it, allowing room for the plants to grow, be trained and pruned, and for airflow behind them. I would like the wires to be properly tensioned and the fixings suitable for an outdoor timber fence. I'm happy for an experienced installer to recommend the best hardware and make minor adjustments to the design. Please let me know if you have experience installing espalier, vine or climbing-plant wire systems. My listed budget is for labour. I’m happy to pay separately for materials. I would prefer the installer to supply the appropriate stainless-steel wire, stand-off fixings and tensioning hardware after assessing what is suitable for the fence. Please indicate your estimated materials cost when making an offer.

Looking for someone to install and supple the Automatic outdoor Gate. Better if someone can come and give me the quote. Location collingwood park thanks

Im needing a new front fence installed. Existing fence has been removed and nothing will be in the way for installation. Needing 1.8 high fence. 1x3 meter double swinging gate. 1x pedestrian gate. Total length just under 20meters. Wanting this done sooner rather than later. Price indicated is just a number i threw up. I also uploaded photos of examples we like

Putting in a track for a 4m sliding gate Have the gate already, just need the track put in. See photos attached. Will require some concrete cutting and will need to avoid any services underneath concrete (unsure what’s there if anything). Hit us up for any questions - Should be a simple job for the right person

Hi I am looking for a experienced labour to install colorbond fence, the total area is 72 meters. All material will be supplied just labour needed Thank you

Require new side gates to the house and someone to install them also

Hi, I’m looking for an experienced Colorbond fencing installer to complete my home fencing project in Collingwood Park. We recently installed a new retaining wall using 2 meters concrete sleepers, and I have already sourced the Colorbond fencing materials and a sliding gate. However, I have not yet confirmed the final price and am looking for an experienced installer who can assess the job and provide a reasonable quote. The total fencing length is approximately 21 metres. The job will involve installing the Colorbond fencing along and sliding gate. I’m happy to consider either an hourly rate or a fixed price for the complete job, depending on what works best. I’m mainly looking for someone experienced who can complete the installation properly. I have attached photos of the area for reference. Please contact me if you’re interested, and I’d be happy to arrange a time for you to inspect the site and provide a quote. Thanks.

We would like to replace this timber fencing with 2.1m Colorbond. Approx 16m in length. Looking for quotes to remove old fence and install the new fence. I'm happy to pre-purchase the Colorbond, or you supply it, whatever works from a cost and ease perspective. The retaining wall is solid; it's a straight run of fence, so it should be fairly straightforward.

Higher fence for privacy , not an expensive fancy gate , build 2 wooden gate for side of house ..

Installation of 30m colobond fence.no demolition straight and plain

Install baby gate today Looking for someone to install a baby gate at my home today. It should be a quick, straightforward job. The gate is supplied—please bring the tools needed for installation.

I have to install Aluminum gate and fence - in total of almost 3 m. I have fence, gates and posts. It's flexible and nego.

Looking for someone experienced with timber fence repairs to replace two decayed top rails. Scope of work Remove and dispose of 2 existing decayed rails Remove any loose/old nails Supply and install 2 × 90 × 35 mm timber rails, approximately 2.5 m long each Reattach/nail the existing fence palings securely to the new rails Leave the area neat and tidy after completion No fence posts or palings need replacing — they are in good condition. Only the two rails require replacement. Please bring all necessary tools, fixings and materials. Location: Augustine Heights

Looking for someone to install a Sureguard Pingg-String cat containment system on the timber paling fence at my property in Augustine Heights. Total fence perimeter is approximately 58 metres. All components have been purchased and will be provided on the day. This includes insulated cable, extension kits, end post kits and energiser included. The job involves mounting bracket arms and insulators along the top of the fence, running and tensioning the wire angled inward toward the yard and rigging the gate loop over the single gate. The energiser position will need to be assessed and decided on the day based on what works best for the setup. It needs to be installed in a north-facing position with access to full sun. There is one fold-down clothesline mounted to the fence that will need the wire routed carefully around it with extra insulators either side to avoid contact with the metal frame. No drilling into structures required as all fixing is into timber palings. Happy to be home on the day to show you around the property before you start.

I have started building a 3 rail PVC fence but am running out of time before I go back to work so am wanting someone to finish building it to completion. Holes are dug but some are slightly off so will require some digging (tools are here) to widen some holes. Then concrete the posts in and insert the rails. Including installing a gate too Either Tuesday or Wednesday this week is preferable but Thursday or Friday possible too Thanks

Replace 3-4 wooden fence posts. Set at least 600 deep. Price listed is for 4, so $175 each so if we agree on the day only 3 required would reduce to $525.

I need someone to replace the left hand side of my fence approx 30 metres long. As well as installing fencing and a pedestrian gate that will run to the side of my house approx 4.5 meters. Requirements: - remove and dispose of old fence - install supplied second hand colorbond fencing preferably raked. and using the best condition sections first. I will supply extra colorbond posts needed. I will need the following supplied: -100 x 75mm post to make filler for bach corner. -surf mist screws to match the posts. Send me your best quotes

During concreting work, my colorbond fence was removed, need help with refitting back