Find a fence installation professional in Outer East Melbourne

I’m replacing the front timber fence (~19 m long) and reinforcing the driveway gate section. Most posts are in good condition and will stay in place — only 2–3 timber posts need replacing (I already have spare matching posts). I’ll also supply two galvanised steel posts for the driveway gate, plus all timber slats, plinth boards, screws, concrete, and oil. I’ve already prepared the site and marked which posts to replace. ⸻ Scope: • Remove and replace 2–3 existing timber posts (supplied). • Set 2 galvanised steel posts (100 × 100 mm) for the driveway gate — no top/bottom rail required, only posts. • Install new vertical timber slats (Merbau or treated pine, 90 × 19 mm) across 19 m span with 3–5 mm spacing. • Install bottom plinth board (150 × 25 mm) and ensure level, alignment, and tidy finish. • Oil/stain all new timber for protection. • Remove and dispose of old fence sections and debris. ⸻ You bring: • Tools (post-hole digger, drill, saw, levels, clamps, etc.) • Skills in timber fencing, concreting, and gate alignment. I supply: • All materials (timber, steel posts, screws, concrete, oil). Budget: 💰 Around $1,400 – $1,600 for labour only (can negotiate). Timing: Flexible — anytime in the next week. Location: Mooroolbark, VIC ⸻ Notes: • Fence height ~1.65 m. • Gate arms will be attached later to the new steel posts (so post alignment is important). • No metal panels or rails — timber slat style only. • Site is clear and ready to start.

The fencing on East side is tilted hence need someone to repair the fencing or in the alternate put up a new fencing. Please provide quote for Timber and aluminium fencing.

🛠️ Fence Clearance before New Fence Installation (One Side + Back Fence) Details: • One side fence: approx. 38 metres long • One back fence: approx. 15.4 metres long • Please clear a 400mm wide area along both fences to allow workers enough space for the new fence installation • Remove any holding wires, plants, or attachments currently on or near the fence • Take away and dispose of all rubbish and debris after the clearance If you can also cut down the tall white tree near the fence, please provide a separate quote including that tree removal.

1. Height of sleeper posts are approx. 1.5m 2. Approx 750mm need to be under the ground 3. I will get the posts, “end posts”, “joiner posts”. Please see the picture. 4. I will get 5, 20kg instant concrete” bags. If more required, please let me know. 5. Posts (first post to fifth post) need to be level. Checked using leveler. 6. Posts About 1 foot away (distance from the fence should be same for all the posts) from the fence. Just incase we want to do something to the fence in the future. 7. Sleepers “slip in/removable” 8. If required, I will be able assist you without any charge 😊

Labour required to help build a timber fence I will supply all materials and some tools would be helpful if you have had some experience in construction and can use power tools looking for someone to put in a good day's work and finish the job in a day

I am seeking a detailed quotation for the replacement of two sections of boundary fencing at my property in Wantirna. The specifications are as follows: Scope of Work • Removal and disposal of existing fence • Supply and installation of new timber paling fence • Total length: • 8.8 m (rear boundary with No. 54) • 10.9 m (rear boundary with No. 56) → Total = 19.7 m • Height: 1.95 m (6 ft 4 in) • Materials: • Hardwood posts (2.7 m length, 600 mm deep set in cement or concrete) • Treated pine rails (75 × 50 mm, 3 per bay) • Treated pine plinth (150 × 25 mm) • Treated pine palings (1.8 m length, vertical) • Please include: • Supply + labour + removal of existing fence • Any site clearing or access charges • GST and all surcharges in total price Optional Items (please quote separately): 1. Concrete footing upgrade instead of builder’s cement 2. Steel post upgrade (75 × 75 mm posts) 3. 600 mm lattice extension (40 mm square holes) Site: 19 Harland Square, Wantirna VIC Please provide a written quotation including itemised pricing (preferably per metre), estimated start date, warranty details, and payment terms

Repair or replace 15m of timber fence. Retaining approximately 200mm of soil.

Materials need to pickup from Dandenong

Replace boundary fence - 30 meters long and 2 meters height timer fence.

Hi, I am planning to replace my fence. Height: 1950mm Length: approx 13m Material: Colorbond Metline ( Ironstone color) Post: 65mm colorbond post Plinthline colorbond as well The fence is on the road side (corner house) Installer demolish and remove old timber Thank you

We would like to request a quote for installing a fence at the front of our property, along with a gate. This is for a newly built property

20 metre long fence at least 2m high

Need a side gate frame supplied and installed, using existing merbau decking pieces. Between house front deck and boundary fence.

Our back fence has separated from the corner connecting with neighboring fences. It’s now on a big lean and looking quite sad. Looking for either a solution to prop it back up or replacement.

Need to fence posts reinforced as the fencing is leaning Needs 3 lengths of fence screen replaced Needs 5 lengths of garden bed edging replaced.

Looking for someone to quote, supply and install front gates.

Consult for task to start this week, completed by end of Monday 20th October. I need an experienced person(s) to securely install fencing posts (50x50x3mm square SHS galvanised posts and horizontal RHS supports) across approximately 40 metres. The posts are 4m high and once in ground will sit approx 3m high. Best to dig square post holes if possible, and use gravel for drainage with concrete post mix for stability. The task will include attaching lattice or mesh screening to the posts using wire or heavy duty zip ties. I can pay for posts, supports, connector brackets and bolts, drainage gravel, concrete post mix, and any other materials required. You will need to bring (or hire) your own post-hole digger and post driver (if needed), free-standing ladder and any other necessary equipment and tools. Your fee will cover your labour and equipment (if needed), and I can pay for the materials on top if you are ordering them. Feel free to ask questions and make an offer.

Fix a section of fencing that is leaning and requires replacement.

I need someone to fix or replace one of the post at my side gate.

install metal Fence, 5 panels, 6 posts. 11m total. 1.5 height. posts have base plates but can just not use it for installation method.