Find a fence installation professional in Logan Beaudesert

I need the following completed; - Back fence completed (currently mesh and star picket) 16m long - Side fence completed (currently mesh and star picket) 9m long - 11 holes to be dug (I have an excavator you can use) - 11 posts to be installed 2400 spacing - Bottom, mid and top rails to be notched in posts (total of 33 rails) - 2.5mm wire runs between mid rail and bottom and mid rail and top, two between both spaces All timber, screws, cement and excavator provided

I need a 6m x 3m dog enclosure built, with a gate. I'll buy the fencing and gate from bunnings.

A handyman is required to install colorbond fence and a small patio. 60 bucks per hour will be paid. Minimum 3 hours. All materials supplied.

I require a new pedestrian gate and repair to one panel of colour bond fence.

We need a timber pailing fence done as well as a wall. Need to Remove Brick Letterbox & Retaining wall. Replace Retaining wall 2.4m Sleepers x 6 Lengths Across(14.4m) and 2 High. New 1.8m high Timber Fence Across the front and to one side. Total 32LM. 1 x Car Gate & 1 x Pedestrian Gate.

Looking for someone to help us install a side gate

A very small part of fence needs to be erected. Two holes have already been done and posts have been installed. Just one more hole is required to be done. 2 hours considered for this job. All materials will be provided.

We need some temporary fencing installed for our dogs, we can supply the fencing or purchase off you if you supply that kind of thing.

I have 2 dogs that need to stay within the property. For this I require a front gate to be installed so they dont get out. Measurements is 4.57m from pillar to pillar (also noted in photos 1&2. I am looking for something as cost effective as possible while trying to match the brick & wooden fence theme, however this is non essential. Ive attached photos with measurements. im open to any material if the price is right. Optional: I also need a fence on the side. this can be any material (still needs to look decent). Photo 3

We're installing a new fence, including a pool fence around the pool and equipment, with all necessary screws, panels, and posts supplied. Please ensure compliance with the Queensland pool safety standard.

I have wooden panels - need to remove i wish to install colourbond fence 1600m high and about 30 m in length

We are in need of a fence. Approximately 35-40m, 1.8m high, 15mm gap between palings, pedestrian gate, + a seperate pedestrian gate - securing other entry point. We have a budget in mind, and look forward to speaking with you to discuss build type. Many thanks for your help

Need a 1200 x 800 pool Gate installed asap our current one shattered unexpectedly. We have hardware , new glass panel, lock and other parts just need it installed correctly.

Require an old timber fence to be removed and a new timber fence to be installed. Fence length is 28 metres.

Change wooden fence to colourbond fence about 7m line . On photo just next to the cream colourbond. Preferably to match that one. I have 1.8m sheets already I need to get posts and cement and the wooden board . Can you please let me know how much I will need ?

replace existing wall - approx 20m x 1m. replace existing colourbond fence panels - Due date: Before Monday, 19 February 2024

Need existing pool fence replaced after removing and re concreting - Due date: Flexible

L shaped colour bond fencing supply and installation 40 metres - Due date: Flexible

Looking for someone to put in a side gate for my house in Greenbank. Ideally wooden/timber but open to suggestions! Have added pics of type of gate we want. - Due date: Flexible

I need 10 - 15 post holes dug (I can hire a hole digger if required) posts that I have tidied up and rails added to make horse feeding yards. Also some pavers or steps in the yard also required - total job cost can be negotiated or hourly rate - Due date: Flexible