50 Brushwood Fence Experts Near You

I need approximately 5m of brushwood fencing Approximately 1.6m high The job is to supply and install brushwood fencing to an existing frame. The old fencing has already been removed. The 5m of fencing that requires replacing will adjoin the rest of an existing brushwood fence

Brushwood fencing and gates required. - 3 sides required. - One side can be just attached to a short chain wire fence that is already there. - One side needs posts put into concrete slab. - Other side bay need posts put into concrete which may need to be poured. - Looking for thickest brushwood possible (around the 60mm mark) and for the fence to be capped. - Gates to be wood.

The top of my brushwood fence needs repairing. Thanking you

Need an Handy man to install approximately 8 meters of Brushwood fencing on cyclone fencing for additional privacy. Brushwood fencing will be supplied, you will need to remove old fencing, clear around the base the fence and install new brushwood fencing

repair existing brushwood fence

strengthen heighten brushwood fence

recapping and strengthen fence

Hi I have a brush wood fence that is 1.5 metres but I need to raise the height to 1.8 metres on top. It is about 8 metres in length. The house is in Dover Heights and can be accessed at any time. See picture attached. Thanks Mon

Replace damaged panel of brushwood in an existing fence. I have the fence material, just need removal of damaged area and replace.

Remove and replace existing brushwood fencing. Pipe frame can be retained, everything else needs to be replaced. Slightly longer than 20 m. I am flexible on time.

total length required 6.5m with double gate will require at least 5 posts, colourbond 50x50 at suitable height with roll tops to suit lower plenty area preferably no timber rails either replacing existing fence no rubbish to dispose, we will be mulching the old stuff

8m brushwood fence with old metal capping. Has a 3m return fence which also needs doing. Would like old capping removed and a new roll top installed. Not requiring infill if possible to avoid - to keep costs down.

I need to replace an existing 13 metres with a height of 2.0. Ideally I want a light coloured brush fence with an ideal height of 2.3 metres.

Raise fence 600mm for about 3 meters,repair roll capping for about 25 meters,remove /cover some wire strands

I need approx 20 meters of brushwood timber fencing replaced and with a rolltop. The existing galvanised steel poles are in good condition as is the treated pine logs under the bottom of the existing fence. No waste needs to be taken off site.

We have an existing brush fence that we need to continue by about 15m. The existing fence is 1800mm high, but where it continues from steps up slightly, so the new section will be 1600mm high. The photos show the existing fence, where it continues from, and the 15m run from the existing brush fence to an existing hardwood fence. Job is at Palm Beach. Quote must include labour, materials and appropriate tradie insurances. Please provide examples of previous brush work.

we need 50 mt brushwood fencing put in and seek someone experienced to do this with quality 😊

front fence 1800/1700H x 8900 L Roll top on top - not sides.

6 metres of brushwood fencing to be bought and erected from near side of house to colorbond fence (6 metres away). Star pickets to be used as it will be a “temporary” fence construction. I’m trying to keep my animal in yard and not in the road! Thanks, Nerida

26.1 m x 1.8 high plus 150 x50 plinth board . 125 x 75 hardwood posts .concrete must be used .thankyou