Find experienced railing contractors near you

Hi there, one of our glass balustrade pool fence has come down in all this wind. Need someone to re-screw it strongly to the timber again & check the other panels to make sure they are secure. Its at an airbnb in Jamberoo

Front fence needs repairing so gate can close. Post at front also needs to be stabilised. Back deck balustrade needs to be replaced due to rotting.

Supply and install: 1. Approx 8m of aluminium batten fencing (50mm*25mm, 25mm spacing, 1.5m high) 2. Approx 15m of balustrade and feature batten privacy screen as shown in photo. Happy to facilitate an onsite inspection.

Install fence posts and fencing to this spot in photos. Need to supply fence posts and fixing.

I want to replace old rotting timber balustrades on my deck with steel fencing available typically at bunnings

Two separate marine wire balustrades. 3200mm L x 1200mm H and 3000mm L x 1200mm H. 10 wire strands in each..Merbau timber posts and capping on both

There is a temporary balustrade that needs to be rebuilt. Happy for a fencing contractor or trades person to remove or build a new wall in waterproof marine ply. Or alternatively, prepared to put temporary pool fencing if it could be bolted into structure at same height. It does not need to be a clad wall, just pool fencing bolted into slab. So either reinstate existing and clad, or replace with a solid aluminum fence that is compliant. Willing to pay $500 for patch up existing or $1.5k for aluminum fencing.

Repair and strengthen timer posts (rotten at the bottom ) maybe by galvanised steel bracket between the posts and the timber deck .

We have approximately 45 meters of balustrades around our deck and two staircases that we’d like to replace with timber and steel wire balustrades, ensuring compliance with the Building Code of Australia (BCA) and Australian Standards. We will handle the removal of the existing balustrades ourselves, so your task will be to install the new balustrades based on the attached inspiration photos. Seeking a carpenter with experience in installing timber and steel wire balustrades. We can supply materials.

Supply and install approx 6 metres of wire balustrade onto existing merbau decking. Possibly need 1-2 additional posts between existing pergola.

Hi Airtaskers We are looking to put up a timber / wire balustrade / fence for a backyard deck. Deck material: Tiled deck over concrete slab. Deck size: 5.9m x 3.3m (approx) The fencing is to comprise of about 9 timber posts that are 90mm x 90mm. The timber posts are to be anchored into the concrete by a bracket which has a single 10mm x 100mm concrete screw. The wires for the fence are spaced at about 8mm up the post, with the post height being about 960mm. You will need to supply all tools for the installation of the posts (eg: drills, bits, hydraulic swager, wire cutter, etc). I will supply materials. Photos posted for context. Look forward to hearing from you and meeting you! Feel free to message with any questions

Wire balustrade approx 20m length all materials supplied - can post up just need wires run

Please help me install a aluminium balustrade fence gate. I will purchase the balustrade gate and fence posts, locks, and hinges, everything needed. Fitting to bolt it into the concrete floor. Twill have gate cut to right size. Attached are photos from side of house where we wished for the gate and the actual gate, Gate is a tubular ring and spear design similar to picture, but is 1.8m in height and 2m in length. Just planning on installing that as a single gate so that it holds on one side. Happy to help on the day as well, cheers

1) Install aluminium barr balcony balustrade - x 3 Barr panels; x 4 posts fixed to balcony floor, which comprises of 12mm porcelain tile on concrete base. 2) Install aluminium fence gate and 2x posts fixed to patio floor, which comprises of 20mm paver on brick base.

We currently have a balustrade fence that is rotting. This fence goes along the pathway to our house. There is some stairs. We need this balustrade replaced and then we want it to be extended by about 3 metres

Need a balustrade fence installed on back patio. Small job but just don’t have enough time to get around to everything.

Needing a labourer - preferably someone who is switched on and has experience with tools. Steel posts and fencing needs to be installed. No tools are needed - we will supply everything for the day. If there right person is chosen, they will most likely get additional work in the future. Please only switched on, experienced tradies who have experience using tools. Must be on site at 8am - in work gear. At the moment we only need you for 4 hours but could be extended.

Install 10 x Stainless steel balustrade posts to be dyno bolted into concrete slab. With wire to be installed and crimped. Will hire swage press if needed. Install 140 x 42 merbau handrail over the top! This is approx a 3.5 x 5.5m verandah. Hoping to have all products on site Wednesday next week (products ordered and happy to share with tasked selected) with start time in coming week or two after this for anyone interested and available. Thanks Katie.

We have just purchased a house in Collaroy Plateau which is not puppy proof for our German Shepherd. The perimeter fences are dog proof but there are no gates on either side of the house. We need someone who can build two gates that are dog proof and that fit in with the timber work on the house such as the balustrade and timber slat cladding on the ground floor. We would like you to measure up the gates and agree on a design with us on the Saturday 25/5 then come back the next week to make and swing them. There may be a fixed panel required to fill the opening aswell. I won't have any photos until Saturday when we move in. The gate goes across the top of the steps with a fixed panel across the top of the drop and we want it to blend in with the slats as shown in the other pic. About 1400 to 1600mm high should do but will be guided by you. The other side of the house is same type of gate and similar size.

Hi there, I am needing to get a dog friendly fencing as soon as possible - 15mt in back yard and 2.5mt driveway gate. Preference for timber - style photos attached but open to other options that will make work possible sooner. Thank you!