Find a local console repairer in NSW

4 tall hedges have already been cut down, need stumps removed and greenwaste removed. Quote price in your message please.

Need to patch plaster and put one manhole

Looking for someone to supply and install one simple, sturdy outdoor handrail beside a short flight of front entrance steps in West Pennant Hills. The rail is for the left side when facing the front door. A practical white timber finish is preferred; happy to consider an economical outdoor-suitable alternative. Please include materials, fixings, labour and finishing in your offer, and confirm the measurements and suitable fixing method before starting. The steps are tiled and can be slippery, with an approximately 900 mm drop along one side. The rail needs to be securely fixed for safe everyday use. Photos: the first shows the existing steps; the second is the proposed handrail reference only - it has not been installed. Preferred completion within a week, by 9 October. Timing is flexible by arrangement, and access will be coordinated with the tenant. Please let me know your proposed material/finish and earliest availability.

Need to install two taps on our new kitchen benchtop. The water lines and pipes are already in place; they just need to be connected and set up.

Hi, We need 4 of the 15 amps power sockets installed in our corner store at Woonona

Have 2 stumps about a meter high that I need stumped out and the roots removed. Access via the side gate is about 950mm

Hi! I’m looking for someone experienced with flat-pack furniture assembly to help assemble a Kmart Thorne Buffet Unit at my apartment in Surry Hills. Tasks required: 1. Help move box: Carry one flat-pack box (approx. 128 × 45 × 18 cm, weighing 35 kg) from the building entrance into the lift and up to my apartment. I can assist with carrying. 2. Assemble buffet unit: Fully assemble the Kmart Thorne Buffet Unit (120 cm wide, 3 drawers, 2 doors and 4 legs). Estimated assembly time is 1.5–2 hours. Tools required: Please bring your own tools, including a Phillips screwdriver or drill driver and mallet. Assembly instructions: Manual: https://www.kmart.com.au/wcsstore/Kmart/pdfs/42942115_Manual.pdf Video: https://youtu.be/PgOXOYcr0VY Additional details: * Apartment building has lift access. * I’ll be home to assist with carrying and holding panels if needed. * All furniture parts and fittings are supplied. * No wall mounting or drilling required. * Previous flat-pack furniture assembly experience preferred. Budget: $130 for the complete job. Please let me know your availability. Thanks!

Looking for an experienced handyman to refurbish our kitchen benchtop. The current surface is a textured vinyl wrap over plywood, and it’s peeling off along the edges. It’s old marine grade ply underneath and we want to sand it back and lacquer it. The work covers three distinct bench sections: Section 1: 184 x 49 cm Section 2: 145 x 85 cm Section 3: 86 x 62 cm (Total area is approximately 2.66 sqm, plus all exposed outer edge profiles). Scope of Work: 1. Removal & Stripping: Strip off the old textured vinyl wrapper across all three benchtop sections and their edges, and thoroughly clean off all leftover adhesive residue. 2. Sanding: Sand back the exposed plywood core and edge profiles to a smooth, clean, ready-to-finish surface. 3. Resurfacing / Sealing: Apply a durable, moisture-resistant protective finish to the exposed plywood (e.g., heavy-duty clear polyurethane, timber varnish, or hardwax oil to highlight the natural grain—open to your recommendation for durability, thinking a darker stain). 4. Siliconing: Cut out and remove the old silicone seal along the tiled splashback and re-apply a clean, neat bead of mould-resistant kitchen silicone. Please provide quotes

I have 2 need taps that need installing. Someone would likely need experience or plumbing background.

I need to remove some stone benchtops, whilst preserving the kitchen cabinets they are on. Believe they are glued down. I will help, I just haven’t don’t it before

Please build a table I bought from Amazon, and also put together potable AC, all Parts will be out of the box and ready to put together straight away. I need this done today please, thank you! Open to negotiation

There is water leaking from my tabs in my bathtub and I need this fixed

Paint colourbond balustrade on upstairs deck. Paint provided. Labour only.

Fixing the small leak from these taps in the laundry room

Various tasks. Replace bathroom taps and faucet (to be provided by us). Replace bath taps and faucet (to be provided by us). Replace shower taps and shower head (to be provided by us). Replace existing under sink connections with mini taps and flexible hoses (to be provided by you). Remove old vanity and replace with new one (vanity, tap and waste to be provided by us, mini taps and flexible hoses to be provided by you)

Looking for an experienced, licensed plumber to replace the bathroom basin taps and shower wall taps as soon as possible. All new parts are on site and supplied by me. Job is in Summer Hill 2130. BASIN Replace the existing 3-hole basin set (two cross-handle taps and centre spout) with a Mondella Resonance Collection Basin Set in chrome (pin lever handles, 1/4-turn spindles, lead-free). The existing taps are old. One handle is already off and the spindle is exposed. The chrome bell covers are very tight and difficult to remove because of age and corrosion. Expect extra time getting the old covers and spindles off without damaging the basin or tiles. Please bring whatever you normally use for seized tap bodies and covers. SHOWER Replace the existing hot and cold wall taps (cross handles on separate bodies, cream wall tiles) with the Mondella Resonance Collection Wall Top Assembly in chrome (pin lever handles, H and C). Confirm on site that the new wall tops will fit the existing in-wall bodies before fitting. If the bodies need work or replacement for the new tops to seal properly, quote that separately before proceeding. Please include in your quote: - Removal of old basin taps, spout and shower handles/tops - Fit and test the supplied Mondella basin set and wall top assembly - New washers/seals as required - Check for leaks at the basin and shower after install - Clean-up of the work area Photos of the existing taps and both product boxes are attached. Must be a licensed plumber. Please advise your earliest availability and a fixed price if possible.

Hi I tried changing my taps but the water keeps on flowing even without on and off Wall tap in laundry I have removed the old spindle and washer but attaching new one doesn’t work

The TV is currently mounted on a bracket in the downstairs room and needs to be relocated upstairs using a new TV bracket. Please ensure you bring all necessary equipment and tools required to complete the installation. Please note: The existing bracket downstairs does not need to be removed.

I need holes for taps on my vanity stone top ,so we can connect taps .

Looking for someone to help install a GPS screen and reverse camera in my 2003 Toyota Corolla Conquest. All parts and cables are supplied. I’d appreciate it if everything could be installed properly and tested to make sure it’s all working well. Thank you