Find a local electronics repairer in Melbourne Eastern Suburbs

Labour only, painting of fascia as discussed at last job on court side of house.

Wheelbarrow and roughly spread 0.75m3 of lawn topsoil. Pile is approx 20m from the lawn and accessed via a 0.9m gate. Lawn area is 31m2. Need own wheelbarrow, shovel and rake.

Toilet keeps flushing. Leaks. Water on toilet floor

Change hot/cold shower taps in 2 bathrooms.Please provide quote

I need a Philips EasyKey DDL615-5HBS smart handle lock (from Bunnings) installed on my front door. Scope. :- • Remove the existing handle/lock • Fit the new lock, including any mortising, drilling or chiselling needed so it sits flush and latches cleanly •Adjust the strike plate so the door closes and locks smoothly •Test fingerprint, PIN, key tag and mechanical key operation • Take away the old hardware and packaging (or leave it, either is fine) Door photos are attached.

Looking for a qualified, highly experienced concreter, boutique builder, or skilled landscaper (semi-retired tradespeople are highly welcome!) to construct a small set of architectural floating concrete steps for my front entrance. I want to achieve a look similar to the attached reference photo.we are happy to remove exisiting steps

1. Table assembly (upstairs lab) 2 electric sit-stand desks: dual-leg motorised frame with control panel and cable tray 2 heavy-duty steel workbenches: galvanised top, lower shelf and levelling feet  All tables are flat-packed and already in the lab. Assemble per the instructions, fit the motor and control panel and check the desks raise and lower correctly, level the workbenches, position the tables and collect packaging into one spot. 2. Safe installation (downstairs storage room) Heavy steel commercial safe with digital keypad, already on site Mount it on to the concrete wall at floor level at the location in the photo. Secure through the back with the 4 supplied hex-head concrete screw anchors Check it’s level and the door opens and closes properly Please be aware, the safe is very heavy. Please take care: The lab has a new fit-out, so protect floors, walls and furniture. Use the packaging or provided moving pads, carry rather than drag, and take care in the lift and around doorways. Desk tops scratch easily, so lay them face-down on a soft surface. Report any damage straight away. Please bring: drill/driver, hammer drill with masonry bits to suit the anchors, socket set or impact driver, spirit level, platform or lifting aid for the safe, Allen keys and basic tools. Location: Surrey Hills. Tables upstairs (lift available), safe downstairs. When: Business hours, Mon-Fri 8am-6pm Taskers required: 2 Budget: $400 total Experience with office furniture or safe installation is a plus. Please mention it in your offer.

Cut down & remove Yakkas & grind down stumps

One wall of an existing planter box has collapsed and requires reconstruction. The wall is approximately 3 metres long x 1 metre high. Scope includes: Remove collapsed bricks and loose masonry. Dispose of demolition debris. Rebuild one brick planter wall only. Render the rebuilt wall to match the existing finish as closely as possible. Clean the work area after completion. No gardening or landscaping is required. Please include labour, materials, disposal and rendering in your offer. Please also check the existing footing/base and advise if any additional repair is required before rebuilding.

Need a plaster to patch the damaged plaster board which is on tile. Just plastering is needed.

Concreting Work Required – Battery Installation Base Prepare a flat and level concrete pad along the external brick wall at the location shown in the photo. This concrete base will be used for a battery installation. Required dimensions: Length along wall: 900 mm Projection from wall: 500 mm Concrete pad size: 900 mm × 500 mm Scope of work: The area is currently stepped/staircase-style, so it needs to be prepared to create one flat and level platform. Form and pour the concrete to the required 900 mm × 500 mm dimensions. Finished surface must be flat, level and solid, suitable for battery equipment. Finish neatly against the brick wall and surrounding landscaping. Remove excess material and leave the area clean after completion. I have attached the picture of the pavers for reference

We have 3 cabinets that are too heavy to move up stairs. We need them taken apart and put back together upstairs. You don’t need to dissemble the whole thing, just enough to lift up stairs. I will help lift upstairs. They are sturdy, not ikea.

Caulking Approx 30 linear metres between brick wall & driveway - see pictures Job to be completed this Thursday 24th You need to supply caulking material

Fitment of new OCAM Heavy Duty Steel Side Steps (SS2-TV-REVO) to 2024 Toyota Hilux Rogue

Swap two taps over pls.

I need a couple of tap sets changed over. See the photos. Will purchase the taps and anything else required.

5 bricks have come loose and need to be fixed with mortar. Mortar and tools provided. If have own new materials would be better.

Run two cables through the wall (probably different routes) from home entertainment system to rear speaker

Hi, I need a quick fix on a small set of outdoor timber steps. A couple of the stair treads have come loose and shifted slightly, and looks like it may just need re-securing or replacing. The structure itself seems fine—no major damage—just some wear and tear from weather exposure. Scope of work should be straightforward: * Re-secure loose or sagging steps (likely just needs screws/nails tightened or replaced) * Check underlying supports for stability * Replace any broken boards if needed (happy to cover material cost) * General tidy-up to make the steps safe and solid again Overall, it looks like a simple repair job—nothing structural, just bringing the steps back to a safe and sturdy condition. Should be a quick job for someone experienced.