Find local downlights installers in NSW

Need some new down lights installed and some existing ones replaced (as they have stopped working). Repair - 7 Install - 10 - Give quotes for both install and change of down lights. - Double story house. Roof access available.

four hardwired ceiling LED drop lights need replacing. We can purchase globes separatly if needed. Please quote with and without.

i need someone to replace light globes, 1 in laundry, 3 x in living room - high ceilings, and take one light fitting down so i can clean it and put it back up. high ceilings so you will need a ladder. hoping to get done eith later this afternoon after 3pm or tomorrow morning (monday) or tuesday after 7pm.

We are seeking a certified electrician to install 6 downlights in a gypsum (gyprock) ceiling. All materials, including the downlights and cables, will be provided by us (purchased from Bunnings). The task will include drilling into the ceiling, ensuring all wiring is done correctly, and delivering a safe, professional finish. Requirements: • Must be a certified electrician (ABN required). • Experience with ceiling (gyprock) installations. • Must ensure all safety standards are met. Timeline: The job needs to be completed either tomorrow or on Monday at the earliest.

Looking for a licenced electrician to: 1. Replace downlight transformers 2. Replace downlight wires and downlight 3. Replace / service bathroom exhaust fans

We have 10 downlights that we need installed and wired in. Qualified electrician job.

[Listed fee/price noted for this job is just a random number] I have 140 (yes - it is a lot!) silver LED downlights throughout the house. The house is approx 20 years old. I need these switched to a more modern sleek white flush LED downlight (same diameter) - e.g "Eclipse Mini LED Recessed Colour Switch 72mm Cut Out Downlight in White" - available at Beacon Lighting. I need a cost to switch out all lights (x 140) - 130 are interior, 10 exterior. Ceilings are standard height (2.50m) with the exception of 1 light above a stair landing (3.3m) and 1 light above the stairs - although this 1 light can likely be accessed from the mezzanine. Also, some GPOs around the house are 20 years old and need replacing (GPO has faded yellowish and is a different shade to the face plate, 1 is broken). Provide cost to replace 2 x double GPOs. Dimmer switches - 17 of the lights are controlled by dimmers. Replace existing with new compatible dimmer. To be considered for this task please confirm: 1) You're a licenced electrician? Years of electrical experience? 2) Price to switch out 140 x lights [spec noted above - or similar quality] 3) Price to replace existing dimmer switches for new switches compatible with the new lights. 4) Price to replace 2 x Double GPOs 5) Availability and approx time to complete (I'm ready to give the go ahead for this job asap) - If you want to inspect, please let me know and we can arrange a time. If you have a rough estimate in mind, feel free to throw it at me. Thanks!

Electrical Work – Install Downlights & Pendant (Ground Floor) Looking for a licensed electrician to install downlights on the ground floor of a double-storey house. Scope of work: - Install approximately 35 LED downlights; downlights already available. - Replace existing ceiling lights with downlights. - Cut new holes in the ceiling and run wiring for additional downlights where required. - Install 1 pendant light over the dining area; installation only, image attached for reference. - Ensure wiring is properly connected to existing circuits and compliant with Australian electrical standards. - Patch/finish ceiling holes neatly after installation; paint not included in scope. Current situation: - Ground floor currently has a small number of standard ceiling lights (as shown in photos). - These will be removed and replaced with downlights. - Additional downlights will require new cut-outs and wiring. - Ceiling height approx 2.7 m.

Hi i need a Sparky, to disconnect lighting make safe. I will take lights and brackets down. 13 in total total some just unplug Parking out front of building on botany road. Preferably tomorrow sometime. Can do after hours, or Tuesday morning. I have more work coming up so would be good to find someone i can trust. Can do hourly rate or fixed price. Easy access. The business is moving premises. I will assist you on the day be your lacky if needed.

I want to get downlights in garage and install two cieling fans in two bedrooms. Also install outdoor lights

Need a qualified electrician to install 6 downlights in the living room using the existing points that are controlled by 2 switches. Another 2 in the master bedroom, and 2 each in 2 bathrooms.

Hello, We are looking for a licensed NSW electrician to attend our retail store, in Albury, to diagnose and repair a flickering ceiling light. The Issue: One of the recessed LED downlights on our main sales floor is constantly flickering. While not a major safety concern, it is very noticeable and disruptive to the store's atmosphere. The Job: The task is to find the cause of the flickering and perform the necessary repair to ensure stable, constant light. The scope of work includes: 1. Safely accessing the light fitting in the ceiling. 2. Diagnosing the cause of the flickering (e.g., faulty LED unit, failing driver, loose connection, or dimmer incompatibility). 3. Supplying and installing a new, like-for-like replacement downlight and driver assembly if the existing one is found to be faulty. 4. Testing the light thoroughly to confirm the flickering is resolved. * Light Specification (see attached photos for labels): Please note: The successful contractor MUST be able to source and supply the correct replacement light and driver as specified above. The cost for these parts must be included in your final offer. Requirements: - MUST be a fully licensed and insured NSW Electrician. - You must have your own tools, including a suitable A-frame ladder. - Experience with diagnosing faults in commercial dimmable LED lighting systems is essential. Location & Timing: Location: Dean St, Albury NSW 2640 When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include all labour costs AND the cost of supplying one new replacement LED downlight and driver. Thank you.

Hello, We are looking for a licensed NSW Electrician to attend our retail store, in Stockland Merrylands, to replace a faulty ceiling light. The Issue: One of the recessed LED downlights in our pre-test room has stopped working. The Job: The task is to replace the faulty LED downlight to restore full lighting. The scope of work includes: 1. Safely accessing the light fitting in the ceiling (Ceiling height approximately 4 meters - a suitable ladder is required). 2. Diagnosing the fault (e.g., failed LED unit or a faulty driver). 3. Supplying and installing a new, suitable replacement LED downlight and/or driver. 4. Ensuring the new light's colour temperature and brightness matches the other existing lights in the room. 5. Testing the new light to confirm it is fully operational. Please note: The successful contractor must be able to source and supply the correct replacement light as part of their service. The cost of the new light should be included in your offer. Location & Timing: Location: Stockland Merrylands 1 Pitt Street, Merrylands NSW 2160 When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include all labour costs AND the cost of supplying one new LED downlight fitting. Thank you.

Replace two bathroom down-lights which are not working. This replacement works are to be performed by a licensed electrician as the wires are screwed to the terminal block of the downlight unit and a like for like replacement is required. The Live wire and neutral wire needs to be removed and inserted on to the new unit. I will supply the down lights complete Unit.

Need to replace 6 Down lights in apartment in Homebush west - I’m happy to supply the down lights or you can buy from Bunnings and I’ll reimburse for down lights

I need someone to change the downlight connection so i can use the downlight plugs. I have the light. I need to change at least 4

Replace 4 dimmable downlight transformers. Lights and fittings allready work. Glebe 2037

Require x2 downlights replaced - downlights can be provided. Currently tenanted

I need 25 down lights to be replaced.

Hello, We are looking for a licensed NSW Electrician to attend our retail store, in Newtown, to replace three faulty ceiling downlights. The Issue: Three recessed LED downlights on our main sales floor are out and no longer illuminate. This is affecting the overall brightness and professional presentation of our store. The Job: The task is to supply and install new replacements for all three faulty lights. The scope of work includes: 1. Safely accessing the light fittings in the high ceiling (approx. 3.5 meters). 2. Removing the three old downlight fittings. 3. Supplying and installing three new, suitable replacement LED downlights and/or drivers. 4. Ensuring the new lights' colour temperature and brightness match the other existing lights. 5. Testing the new lights to confirm they are fully operational. Light Specification (for sourcing a match): - Type: LED Downlight Deco, 13W Round, White, Dimmable, Warm White (from GoLights). See attached spec sheet. Requirements: - MUST be a fully licensed and insured NSW Electrician. - You must have your own tools, including an A-frame ladder or platform appropriate for a 3.5-meter ceiling height. - Experience with commercial lighting, particularly recessed LEDs, is essential. - The contractor must be able to supply the three replacement downlight fittings. Location & Timing: Location: 229 King Street, Newtown, NSW 2042. When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include all labour costs AND the cost of supplying three new LED downlight fittings. Thank you.