Find reliable local air conditioning installation services in NSW

Dear Team, I am looking for a licensed and qualified air-conditioning technician to install four Samsung split-system air conditioners at my double-storey home. The units are as follows: 2 × 2.5 kW Samsung split-system air conditioners 2 × 3.5 kW Samsung split-system air conditioners The main electrical switchboard is located on the right-hand side near the entrance to the house. I would appreciate it if you could inspect the installation requirements and provide a competitive quote for installing all four units, including any necessary electrical work, pipework, brackets and drainage. I am available at home and flexible with installation dates and times, so we can arrange the work at your convenience. Please let me know your availability, the estimated installation cost and whether a site inspection is required before providing a final quote. I look forward to hearing from you. Thanks and regards

I have a brand new multi head split system to install. 9kw outdoor unit and 3 x 2kw and 1 x 3.5kw indoor units Rinnai brand. For a townhouse, 3 unit upstairs and 1 unit downstair. 3 units can be installed through the side wall and one through the roof.

Install new and remove old air conditioner

Hang indoor ducted unit and pipe to outdoor unit with interconnect and drain 2 story house all material will be on-site to complete. All ducting is complete

Looking to replace old sanyon split system unit with new split system. Single story house, new unit Hyundai 7.2kW

Install AC unit in the dining space

Install a second hand air conditioner. Was working fine at previous location, just needs to be installed at new location.

Split system air conditioner installation, 3rd floor apartment (Cremorne 2090) I’m looking for a licensed installer to fit a wall-mounted split system air conditioner. I’ll supply the unit, most likely a Fujitsu 5.0 kW reverse cycle. Job details: - Indoor unit to be mounted on the living room wall above the TV (photo attached). - Outdoor unit to go on the balcony, on the opposite side of the room from the TV wall. - 3rd floor, walk-up with no lift. - double brick 1980s build. Can be done anytime in the next few weeks. Need to have the required certifications.

Looking for someone to install my Kogan 5.2 kW split-system air conditioner in Brunswick Heads. The previous owner took their old unit, but the existing setup is already there. Looking for someone reliable who can offer an affordable price. Please message me with your best quote. Thanks! I’m located in Bruns Froyo and mart if u want to come and have a look my shop is near bk coffee

Looking for a Reliable Air Conditioning Installer to install my Panasonic 7.1kw reverse cycle split system air conditioner and purifier ❄️ Hi everyone! 😊 I’m looking for a trustworthy and reliable person to install a split system air conditioner in my unit. Please leave your quotes and I’ll get back to you 😊

Just needing someone to install a Kogan Aircon

Hi, I’m looking for a licensed air-conditioning installer to supply and install a new Daikin reverse-cycle air-conditioning setup in my 2-bedroom apartment in Ryde. My preferred setup is: * Living room: 1 × Daikin wall-mounted split system, likely around 4.6–5.0 kW, with its own outdoor unit. (There is currently no unite installed here i had attached a picture showing where the installation should go, there space for the outdoor unit outside the wall) * Master bedroom: approx. 2.0–2.5 kW indoor unit. * Second bedroom: approx. 2.0–2.5 kW indoor unit. * Both bedroom units to operate from one Daikin multi-split outdoor unit. * All three indoor units to have Wi-Fi/app control, ideally allowing them to be controlled together through the Daikin app. There is currently an older Panasonic split system servicing the master bedroom. This will need to be removed, including the existing outdoor unit. Existing pipe/electrical routes may potentially be reused where appropriate. The outdoor units are located on the apartment balcony. The two bedrooms are adjacent to each other and close to the existing AC pipework, so the bedroom installation should be relatively straightforward. For the living room, I would like the indoor wall unit installed on the green wall shown in the photos. Pipework/drainage route will need to be assessed. I’m open to the installer recommending the correct capacities after assessing the apartment rather than being locked into the sizes above. Please quote for complete supply and installation, including Daikin equipment, Wi-Fi functionality/adapters if required, electrical work, pipework, drainage, brackets/mounting, removal/disposal of the existing Panasonic system, commissioning and GST. Please also include the exact Daikin models proposed, warranty and earliest availability. Must be appropriately licensed and insured.

Im looking to install multiple heads AC, new installation. Requirements: * Assist me in Strata application, work can only be done after Strata approval. * ground floor apartment, Not back do back * I provide Huyndai 4 heads 2.6kw, 1 outdoor 10.7kw * You provide piping, electrical and everything else to complete the installation * Floor plan, switchboard attached: red line is current outdoor unit, green is current AC * Please quote in comments

Place previous installed air conditioner. Old one is removed. Air con will be provided. Final price.

It is the underground of a house and doesn't have a window and need ventilation. I'm planning to install an air conditioning and I already bought a unit from kogan. I would like to know how much it cost as Labor

Disconnection of existing lounge A/C system.Installation of Mitsubishi Electric multi head A/C system serving lounge and bedroom. Unit sourced Lounge: 5Kw wall mounted indoor unit Bedroom: 2.5Kw wall mounted indoor unit Outdoor unit: 5.2Kw reverse cycle inverter multi head outdoor unit MXZ-2F52VF-A1. Colorbond trunking to be replaced with larger trunking to accommodate new bedroom piping/ wiring (this will be supplied) Electrical: New dedicated A/C electrical power circuit with outdoor isolation switch and safety switch as required (supplied). Internal cable duct will be required to run mains from internal DC to outdoor circuit breaker.

Looking for air conditioning installers who are familer with vrv and hard drawn pipe. Jobs ready to go. Must be abn registered

I need an air conditioner installed replacing an old one. The new one is a Panasonic 5kw. We want the new outdoor unit on brackets above ground level about the same height as the indoor unit. It is about 3m high might require 2 people. Brackets to be supplied by you. The indoor unit is on the ground floor of the property.

I need a qualified installer to remove an old Toshiba wall air conditioner and install a new reverse‑cycle window/wall unit in the same spot. Opening size: • Width: ~510 mm • Height: ~335 mm • Wall: (brick/gyprock – installer to confirm on inspection) The new unit will be a compact reverse‑cycle model (Kelvinator/Teco 2.2 kW). These units are slightly taller (around 345 mm), so the job may require: • Minor height trim (1–2 cm) OR • Lowering the opening slightly OR • A small timber infill panel I want the installer to advise the best option.

I need someone to install a small split system. I have the unit here. It’s an easy install with the inside unit above a window and the external unit on the other side of the brick wall behind it. There is already an external PowerPoint in the correct position and there’s a gutter to drain it into right next to the external unit. I’ll supply the split system. You’ll need to bring your tools gas and the connecting hoses.