Find reliable local air conditioning installation services near you

Looking for an experienced, licensed professional to install an air conditioner in an older, 3beds ground-floor apartment. You’ll also need to help me complete the Body Corporate application. Price is negotiable

Need back to back done with electrical

Need to install 2 split 3.5kw cool/heat aircon systems for 2 rooms as in the attach photos. The offer is for installation+materials only. The outdoor unit is on the roof, right on top of the indoor unit. Require a dedicated CB for these 2 aircons. Open for reasonable offer, feel free to ask if you have any questions.

Install 1 x Panasonic C3.5kW H4.3kW Reverse Cycle Split System and Air Purifier at a Commercial Location. See images for install location. Outdoor unit will be in the space directly above the Indoor unit (not back to back, but straight on top). Can run the drip straight outside and thru the concrete wall. and drip outside. Installer must be fully licensed and provide a certificate for Warranty purposes from Panasonic.

Install AC unit in the dining space

Installation of small split AC unit for bedroom space. Power box is on the same exterior wall as the unit.

5.0kw split system to be installed. Have the exact same one in, so shouldn’t be too difficult .

Looking for quotes to install a 2-head reverse cycle multi-split system in a top floor apartment. Outdoor unit on balcony, indoor units in living area and Bedroom 2. Floorplan attached. Happy with install only or supply + install quotes. Please include licences and what’s included.

AC Installation Requirements (Sandwich Panel) Room: ~10m² | Wall: Nearly 8cm thick EPS Foam Sandwich Panel AC: Mitsubishi Heavy Industries Inverter Split System (Pre-purchased) please review these essential requirements due to the unique panel wall structure: 1. Indoor Unit Mounting (Through-Wall Bolts): The foam core has no structural grip. Do not use standard screws. You must use long threaded bolts (10-12cm) to drill completely through the wall, using large heavy-duty washers or a backing plate on the exterior wall to distribute the load safely. 2. Wall Core & Sleeve: Panel cut edges are razor-sharp. You must install a plastic PVC wall sleeve. All copper pipes and cables must pass inside the sleeve to avoid rubbing against sharp metal edges (fire/short-circuit hazard). 3. Outdoor Unit: Must be placed on the ground with thick rubber anti-vibration pads. Do not hang it on the panel wall to prevent loud indoor noise/resonance. 4. Vacuum Pump: This is an inverter system. You must use a vacuum pump for at least 15 minutes to pull a deep vacuum (-0.1 MPa). No gas purging allowed. 5. Waterproof Sealing: Fill the wall hole with expanding foam, then seal both sides completely with neutral weatherproof silicone to stop water leaking into the foam core. 6. Site Inspection welcome before give a quote

Need installation in the garage

Install a second hand air conditioner. Was working fine at previous location, just needs to be installed at new location.

I require a qualified electrician to install a 2.5 kW split air conditioning system in my master bedroom on the second floor. I can buy the ac and someone can come and install the split aircon back to back. I have highlighted the house pictures and installation point and outer unit location in picture.

Install a split system air conditioner

Looking for air conditioning installers who are familer with vrv and hard drawn pipe. Jobs ready to go. Must be abn registered

Installation of 5kw split system. Old style apartment building. Apartment on second floor. (Ground, first, second) Have seen neighbours install without scissor lift previously. I will supply the unit. Floor plan attached with positioning. Picture of switchboard attached if needed

I need an air conditioner installed replacing an old one. The new one is a Panasonic 5kw. We want the new outdoor unit on brackets above ground level about the same height as the indoor unit. It is about 3m high might require 2 people. Brackets to be supplied by you. The indoor unit is on the ground floor of the property.

I need a qualified installer to remove an old Toshiba wall air conditioner and install a new reverse‑cycle window/wall unit in the same spot. Opening size: • Width: ~510 mm • Height: ~335 mm • Wall: (brick/gyprock – installer to confirm on inspection) The new unit will be a compact reverse‑cycle model (Kelvinator/Teco 2.2 kW). These units are slightly taller (around 345 mm), so the job may require: • Minor height trim (1–2 cm) OR • Lowering the opening slightly OR • A small timber infill panel I want the installer to advise the best option.

I live in Midland. Recently I’m thinking about installing an air conditioner. I’d like to ask install it 2.7kw The installation location is back-to-back on a brick house. All installation materials must be included in your quote, except the split systems which will be supplied by me.

I need someone to install a small split system. I have the unit here. It’s an easy install with the inside unit above a window and the external unit on the other side of the brick wall behind it. There is already an external PowerPoint in the correct position and there’s a gutter to drain it into right next to the external unit. I’ll supply the split system. You’ll need to bring your tools gas and the connecting hoses.

Looking for someone to install one (possibly two) AC split systems at my place. Planning to put a split system in the living room prob around 3-3.5kW max. There is a dedicated circuit for the 6kW window box Kelvinator upstairs. Considering to also replace it for a split system 2-2.5kW or get another window wall box. Wanting to make both ran in the same dedicated circuit so no overloads. Feel free if you want to come over to have a better look and provide a quote with mid-premium brands.