Find a professional garage door installer in QLD

Looking for someone to replace the worn rubber drive belt on our tilt garage door opener and carry out a general door service. Details: Motor: Crown CG1200 garage door opener Door type: Tilt/lift garage door The existing rubber drive belt has stripped teeth and needs replacing. A replacement belt has already been sourced and will be supplied. Remove old belt, install and tension replacement. Test and adjust opener as required. Motor is otherwise operational. Located in Toowong, Brisbane.

One side of the garage door rollers come off and jumbled Need done before dark asap please

Fix 2 impacts (dents) on garage door lower panel.

Remove and replace the timber around 3 garage door and replace a timber personal access door to the garage.

The garage door is hanging off on one side and the bracket needs to be replaced .. can’t open or shut garage due to this issue

Both cables are currently not attached following an unsuccessful repair by a local handyman.( he could get it working and after a couple of tests it would slip and need realignment )The electric garage door is not currently working, however the door can be opened and held up manually.

Belt needs replacing. The old belt gradually fell to bits and now the door wont lift up cos there are no teeth left on the belt. I have the new belt already. Its a liftaway brand. Single garage door. At Kallangur

My sterline garage door had something that got stuck in it causing it to come off the rails . It needs some muscle and 2 put 2 wheels back in rail

I want this electric garage opener raised so it sits against the ceiling as I need more clearance underneath.

Looking for an experienced garage door repairer to fix a lifting cable that has come unwound from the cable drum on one side of the garage door. The cable on the opposite side appears to be correctly positioned. The job involves rewinding and re-tensioning the cable, realigning the door if required, and ensuring it operates safely and correctly. Photos available for reference.

Looking for quotes for someone to fix my Merlin garage door remote. The garage door works fine using the button on the motor, but the remote has stopped working. I’ve already replaced the remote battery and it still doesn’t work. It’s a Merlin SilentDrive Elite

I’ve recently had a panel lift/sectional garage door retrofitted to my garage in Carindale. Because the garage wasn’t originally set up for this type of door, there weren’t suitable fixing points in the ceiling where the installer needed to attach the overhead tracks/brackets. The garage door company is coming back to rectify the installation, but before they return I’d like suitable structural fixing points installed above the ceiling. There is good access to the roof/ceiling space via a manhole, with plenty of room to work. I’m looking for an experienced carpenter/framer who can assess the existing roof/ceiling framing and install appropriate timber blocking/noggins or other suitable structural framing at the required locations, so the garage door installer has solid fixing points for their brackets. I can provide photos and indicate where the garage door brackets/fixing points need to be located. Location: Carindale, QLD Timing: Ideally completed before the garage door company returns. Please bring the appropriate timber, fixings and tools. When responding, please let me know if you have experience with roof/ceiling framing or preparing fixing points for garage doors.

Old 1980s one-piece tilt garage door with strong extension springs/jamb fittings. I’m removing the door myself for renovations. I only need someone experienced with old tilt garage doors to safely de-tension and remove both counterbalance springs and confirm there is no remaining spring load. No full door removal or disposal required. Please only offer if you have specific garage-door spring / tilt-door experience. Early morning preference on Sunday 13/9/26

Need two garage doors removed, sitting out the front ready to go.

Need Garage door fixed the big spring is broken see the photo attached

Hi there, I need an experienced garage door technician or capable handyperson to repair or replace a broken bracket on our automatic roller garage door and perform a general service. The Problem: - A bracket on the inside of the roller door mechanism has broken. - I have attached pictures showing the exact bracket and the extent of the damage. What Needs to be Done: - Supply a suitable replacement bracket. - Install the new bracket securely. -Perform a general inspection of the entire door mechanism. - Lubricate the tracks, springs, hinges, and any other moving parts that require oiling. - Test the door to ensure it opens and closes smoothly, safely, and without straining the motor. Requirements: - Previous experience repairing automatic garage doors due to the safety risks associated with door tension. Please mention your experience with this type of repair and servicing when making your full and final offer. Let me know your earliest availability. Thank you!

Automatic garage door has stopped working properly like it should after a car reversing into it slightly. The garage door works but is sometimes interrupted. We tried to fix ourselves and might have caused it more issues. Could also be really simple fix

I need you to help get this garage door piece back in side so I can shut it

Can any locksmiths help me out here!! Lost my keys to my side door and garage doors are yous able to make me new keys?

I would like someone to repair a hole in an exterior wall that’s above a garage door as it has been hit during a move.