Find experienced deck builders in SA

Our deck needs a clean and oil

Looking for an experienced Canberra decking contractor to supply and install an L-shaped composite planter and seating system in a compact backyard. Drawings and visual mock-up available. Target budget: $7,000 AUD. Seeking the best complete solution within this budget; final scope and price subject to site inspection. Creative cost-saving ideas welcome without compromising safety or durability. Layout: Two perpendicular boundaries, each approximately 15.3 m long. Side 1: 14.85 m narrow planter, maximum 300 mm external depth and 600 mm high, joining one 450 x 450 mm square corner planter. Side 2: corner planter > 2 m seat > square planter > 2 m seat > square planter > 2 m seat > square end planter > remaining 7.5 m narrow planter. Exactly three seats and four square planters. All planters are 600 mm high. Seats are 450 mm high and deep, with a supported 150 mm projection beyond 300 mm-deep bases. Each seat needs its own comfortable chair-height backrest. Materials: Dark-charcoal capped composite on visible planter and bench-base faces; warm-brown composite seats and backrests. Economical treated-timber framing where suitable, with metal supports only where necessary. No custom steel planter bodies required. Nothing may attach to or rely on the fence. Include proper supports, anchoring, waterproof liners and drainage. No soil or plants behind or under seats. Preserve artificial grass outside the new structure. Quote ONE complete installed package with included line items for: * Structure, composite finishes, seats and backrests * Ground preparation, footings and anchors * Liners and drainage * Recessed warm-white LEDs, drivers and licensed electrical connection * Soil and compact, frost-tolerant foliage plants * Drip irrigation * Edging brick removal, waste disposal and clean-up Provide an itemised breakdown and total including GST, not optional extras. Avoid nectar-rich flowering plants. Advise availability, composite brand and warranties.

Quote to removal of decking and timber 34 square metre

Remove a glued down/screwed in booth & table off a nightclub smokers deck. Dispose of all pieces off site. Sand & stain where booth was previously (no glue remnants). Also looking for an entire deck refresh with a stain in the future. This is an LGBTQIA+ nightclub so must be queer friendly.

Remove a glued down/screwed in booth off a nightclub smokers deck. Dispose of all pieces off site. Sand down & stain entire deck. This is an LGBTQIA+ nightclub so must be queer friendly.

All materials supplied pull up old deck & replace

Wooden deck. The shaded area is about 3x7 and in relatively good shape. The unshaded area about 3x4 and a bit more weathered. Looks like it needs a clean, sand and treatment. We know the materials previously used (see photo) Backyard, easy access. Open to options (eg do it all in a day or over two days around other jobs while it dries) - we have two dogs and a toddler though. Also happy to help a bit to quicken it up but just would need to know in advance your plan. Could be open to a discussion on touching up the chairs as well if it's a complimentary job but a secondary issue - please quote for the deck. Happy to be quoted options based on your recommended treatment plan. Cheers

Home decking at alfresco area. Approximately 4x3 metres rectangle. No inground footing or posts will be required. Timber joists and frame with ecodeck decking panels. Happy to organise all the materials once I confirm that I am ordering the right amount etc with you. So quote will be labour costs only. Deck should be levelled to existing concrete alfresco. Note that alfresco blinds will be installed to close the space up. Any other questions please let me know.

Metal cables have come off from railing on deck , need to fix them main repair appears to be the stainless-steel wire balustrade/cable system Re-tension/reconnect existing wires

I need a deck metal frame. Metal is available. Need to cut and assemble on site.

I need help cutting down a mature Boxelder tree and removing the old deck built around it. Insurance Required: Because some branches extend over towards the neighbour's property, taskers must hold public liability insurance to ensure safe operations. Tree Removal: Chop down the tree safely. The main trunk and larger logs should be cut into manageable firewood lengths and left on-site (I am keeping the firewood). Green Waste: The fine branches, twigs, and leftover green waste not suitable for firewood must be taken away and disposed of. Deck Removal: Dismantle and clear away the old deck. All materials, framing, and waste from the deck must be taken away and disposed of. Access & Location: Located in Sheidow Park. Standard backyard access (see attached photo). Please bring your own tools and include disposal costs for the deck and fine branches in your offer. Kindly confirm you have public liability insurance.

wanting to extend decking around a concrete porch step from an existing merbau decking frame

Clean and oil a deck - need to pick up materials (all paid for by owner)

Replace a timber deck with composite material. Levelling of current deck also required

7m long by 5m wide stratco cooldeck veranda attaches to house

I am looking for someone who can build backyard timber decking or do tiles. Approx. 10m.sq

Recently moved in to new house and discovered that the reverse side of the rear wall has not been clad. The Hardieplank is on site, but will need to be installed, sealed and painted please.

​Title: Timber Deck Cleaning & Restaining + Post & Rail Painting ​Description: Looking for an experienced tasker to clean and restain an outdoor timber deck and paint a short post-and-rail fence. ​I already have the stain (Cabot's range—previously used on this deck), so you won't need to supply the main finish. ​Scope of Work: ​Prep: Wash down the deck and fence area thoroughly to prepare the timber surfaces. ​Main Deck Area (2 Coats): ​Front section: Approx. 5m x 5m (plus ~500mm high fascia/edge) ​Side return: Approx. 5m x 200mm ​Access step ​Fence (2 Coats): Approx. 15 linear metres of post-and-rail fence. ​Application: Apply two coats of the provided Cabot's product to the deck, step, and post-and-rail fence, allowing adequate dry time between coats. ​Details & Requirements: ​Must bring your own pressure washer/cleaning equipment, brushes, rollers, and basic prep tools. ​Experience with timber deck maintenance and Cabot's products preferred. ​Please ensure clean lines and neat application around edges. ​Location: West Lakes Budget: $500 (Open to quotes based on scope)

Looking for someone familiar with Ekodeck or new tech wood castellated panels to install on existing good neighbour colorbond fence using galvanised steel frames. I will supply only the panels. Needs to be cut into two or 3 as they come in 3.6m or 5.4 m height. Length of back fence is around 11200 mm and sides ( small area - dont hv the exact lebgth yet ) . Use pictures as reference to gauge. Ill measure the sides later on Today. height 1.8m. Pls quote labor+ materials of the galvanised steel frames etc. panels will be supplied by me.

Looking for a reliable handyman for a few small jobs around the house.Tasks include:
• Minor internal painting (touch-ups / small areas)
• Building an Easy Shed, including basic ground preparation
• Cleaning and staining an existing deckAll materials can be supplied if needed. Ideally after someone experienced, tidy, and able to complete the work over one or more days. Happy to discuss timing and costs.