Find a reliable computer and IT professional in SA

i have a gpu and cpu for installation

Help with the wiring on a cnc router, the frame / gantry are assembled. The cnc in question is a makerstore fortis.

The job: I have all the hardware (Ubiquiti UniFi) ready to go for a small co-working space. I need someone with practical networking and security install experience to set it up end to end and hand it over working. You do not need to be a UniFi-certified installer, but you do need to have done this kind of work before. What is already in place: Server rack on the ground floor with a 24-port patch panel and data cabling already run to each desk A second cabinet upstairs Active NBN connection on site An existing entry door with an electric strike What I need done: Rack and connect the gateway (UDM-SE) and a 24-port PoE switch, patch through to the existing panel Install a small switch in the upstairs cabinet Mount and connect two ceiling WiFi access points (one per level) Configure the network: separate member, guest and admin networks (VLANs), a guest WiFi portal, and device isolation so users cannot see each other Install and aim one entry camera, set up local recording Install the door reader and hub, wire to the existing strike, set up tap-and-phone unlock Test everything and walk me through managing it, with remote admin set up so I can run it day to day What I supply: all hardware. What you bring: tools, ladder, patch testing gear, and your expertise. Payment: Full amount on completion once the system is tested and confirmed working. Happy to use Airtasker Pay so funds are held securely and released on handover. Please tell me about a similar job you have done recently. Happy for you to come and see the space in order to confirm or quote

I can’t Charge my laptop in bed the type ports replaced and reattached

My computer is slow and I have tried everything but it slow and browser is not loading.

We have just moved into a single-story, brick veneer home. The black NBN box (HFC connection) and its corresponding coaxial wall outlet are currently located inside the kitchen pantry, which is not suitable for our setup.I need a licensed electrician or registered cabler to relocate this connection (or install a new secondary coaxial extension outlet) into our home office room.Job Details:Property Type: Single-story, brick veneer.Current Location: Kitchen pantry.Target Location: Home office.Roof Access: Yes, single-story crawl space is accessible.Requirements: Must hold valid ACMA Open Cabling Registration / Electrical License. Please provide your own tools, coaxial cable, and a new wall plate for the office.Please provide a quote including all materials. Flexible with days and times.

DSL light is not turning on, so there is no internet. I need someone to help check if the telephone port is working of if my modem configuration is wrong.

No power going out of board

We are currently using Vision FTTB (TPG FTTB). An NBN technician has attended the site and provisioned a new port (see attached photo). We are looking for a network technician to assist with migrating our internet service from the existing FTTB connection to NBN. The NBN service is configured as IPoE (Dynamic IP) over VDSL. The site is located at Rundle Mall.

We are bumping out our modular Kiosk from a pop up at Westfield Marion and need some muscle to assist our team 💪🏼

We have a customer with one of our Spark outdoor TVs that uses a Google-based motherboard and requires a replacement. You can view the product here: https://outdoortv.com.au/products/spark-pavilion-2-pro-outdoor-tv-75 The replacement motherboard has already been delivered to the customer’s home. We also have step-by-step instructions available that we can provide to guide the installation process.

I have the nbn box I have the modem the connection is active from my provider but for some reason still no internet. Maybe I am missing a step ? . The modem is brand new .

Our Hp envy printer is offline, I cant get it connec to Mac desktop WiFi. Plus need Mac desktop checked to make sure its updated etc.

Need someone local to visit my client for computer cleanup and email restoration.

1x iMac (forgotten password and need to wipe / reset) 1x MacBook Air - won’t turn on (I know the password but just want to wipe the laptop)

Replace motherboard, upgrade BIOS, and perform cable management. Reapply coolant/thermal paste when swapping CPU (bring a coolant). Check and confirm PC is fully working after installation, including boot, temperatures, and all components functioning correctly.

Looking for an ACMA licensed cabler to install Cat6 ethernet/data points in a newly built single-storey home in Adelaide. Scope of work: * Run Cat6 cables from NBN/comms box (located in garage) to internal rooms via roof space * Install and terminate wall plates (no pre-terminated cables) * Test all connections after installation Required points: * Living / TV area – 2 data points (one for router, one for TV/devices) * 1 bedroom/study – 1 data point House details: * Timber frame with gyprock walls * Good roof access available Looking for a clean and professional finish. Open to suggestions for optimal placement. Please confirm you are ACMA registered when making an offer. Budget is indicative and open to reasonable quotes.

Have created a simple Game App. WOuld like to publish it at Google play. Caught up in Google cosole developer page. Need someone to help publish it.

We need the NBN (FTTB located in building basement) to be connected to our new modem/router (supplied by TPG) located on mezzanine level of same building, using existing network cables, patch panels and switches.

Disconnect from old Wifi and reconnect to new Wifi, it’s the technical side of it that’s required. No installation required.