Find a reliable computer and IT professional in Point Cook

Price negotiable Looking for someone experienced with high-end builds — ideally you've built with Intel 13th/14th gen and tower coolers before. Monitor, keyboard, mouse and internet available for setup and testing. NEW PC — parts on hand: • Intel Core i7-14700K • Thermalright Phantom Spirit 120 EVO ARGB (paste included in box) • MSI PRO B760M-A WiFi DDR4 • 32GB Corsair DDR4 (coming out of the old PC) • Gigabyte RTX 5070 Ti Windforce OC SFF 16GB • Lexar NM790 1TB NVMe (new) • Samsung SSD (from old PC — has my Windows 11 Pro and all my files on it) • Corsair RM850e 850W ATX 3.1 • Lian Li LANCOOL 216 WHAT I NEED DONE: 1. Assemble the new PC with tidy cable management. GPU on the PSU's native 16-pin cable, fully seated. 2. Windows: my existing Windows 11 install and all my files are on the Samsung SSD. Use the Samsung as the primary/boot drive in the new PC — do NOT wipe or reinstall it. Install the Lexar NM790 as a second drive, formatted and ready for games and projects. 3. BIOS: update to latest, enable XMP, enable Secure Boot and Intel PTT (TPM), leave CPU power limits on Intel default profile. 4. After first boot: install chipset, GPU, WiFi/LAN and audio drivers, remove leftover drivers from the old PC, confirm Windows is activated (licence is linked to my Microsoft account). OLD PC (MSI Z390 Gaming Edge AC, i5-9600K, RTX 2060, DDR4): • Take out the Samsung SSD and the 32GB RAM for the new build • Install my spare DDR4 stick • Remove the CPU cooler, clean, and apply fresh thermal paste.

internet point intallaiton is required from garage (NBN box) to room and study area. i already have internet cables ;

Currently my NBN modem is connected in the garage. I need the modem installed so that it is inside my house.

I bought commercial printer to print gift boxes, but I need help to set up the Chinese printer, It’s very big printer like 3 meter wide and 2 meter long. It’s not small printer

Need to install Rj45. Connector on data cable inside the house

Hi! Just summarising the issue with my Acer Nitro 50 Intel prebuilt. I'm not very tech-savvy, so I had AI help me put the symptoms into a clear summary, and I've also spoken with a friend who has IT experience. The PC has been having boot/recovery problems. I previously got a MEMORY_MANAGEMENT blue screen, with win32k.sys mentioned, and I'm now getting the Windows Recovery Environment with error 0xc0000001. Previously, I was able to access the different recovery options, but now whenever I select options such as Startup Settings or UEFI Firmware Settings, the entire PC just powers off instead of opening the option. I've also tried getting into the BIOS/UEFI using F2, but that hasn't worked. I haven't tried resetting or reinstalling Windows because I have important files on the PC and don't want to risk losing anything. I was previously told the storage drive/hard drive might potentially be the issue, but I'm not sure what's actually causing it. I'd appreciate having the hardware and storage properly diagnosed before anything is replaced or Windows is reinstalled.

This can be done online I need cosmetics list typed (cut and copied) onto excel and exported onto system

UPDATE### I NO LONGER REQUIRE THE 2ND ROUTER INSTALLATION- SEE REVISED JOB DESCRIPTION AND QUOTE ACCORDINGLY I would like NBN internet channelled to the back of the house via cavity on wall from front of house(office..other cables/ yellow tounge in place)up through wall cavity to ceiling then ..(some 30m)through the ceiling cavity...then down (single storey house by the way).. then another cavity wall down to TV via ethernet cable (there is existing other cables coming down the wall) Let me know what l need to purchase and what you will provide.. and obviously your inclusive price if you are bringing in some of the materials Point Cook Vic ## Please Note picture supplied is of the current NBN configuration in the office which will need rechanneling back into the wall cavity into the ceiling then down the cavity into Ethernet TV

Need 2 data cables run from garage NBN area to new ceiling Access Points, one in lounge, one in front office. One less than 10m, the other just under 20m. Prefer solid core / quality CAT6(a). Also need power point fitted to back wall of garage (backs onto Kitchen, where existing points are). House is single storey, concrete tile.

I need to relocate internet phone socket from my kitchen to somewhere more feasible.

I can't get my printer to work. Located in Piint Cook

Below is the email my internet provider sent. Need this cabling work dine “We would like to advise you that the Opticomm Field Technician attended your premises but was unable to complete the installation as the property was not fully prepared in accordance with Opticomm's installation standards. The technician's findings were as follows: No internal conduit is present. Both the ADSL and NBN services are currently connected to the property. You have requested an Opticomm connection instead of NBN. Both entry points were found to be blocked during rodding. No conduit is present in the garage cabinet where the NBN equipment is installed. The PCD and LIA have been pulled and installed. An installer report has been provided outlining the required rectification works. To proceed, your builder or a licensed third-party cabling contractor will need to complete the required works as detailed in the technician's report.”

LENOVO_MT_82BH_BU_idea_FM_Yoga 7 14ITL5 Lenovo yoga 7i screen damaged broken near the right hand corner of the screen at the joint where the laptop folds. whole screen needs replacing.IF you can give me a quote with replacing touchscreen with original lenovo screen.thank you

Looking for someone familiar with Evolis card printers and card-feed mechanisms to diagnose, run a cleaning cycle, or repair (if needed) the ID card printer that we use at work to print out the badges for our trainees and workers. - Printer won't take the cleaning card or T-card into the machine whenever I start the cleaning cycle. I have already tried restarting and updating the firmware but still no luck - All the button indicators work, and the rollers appear to be correctly installed. -I have a compatible Inkstation cleaning kit (ACL002) available, with remaining cleaning cards that can be used during the troubleshooting and repair process.

Hi, I have a MacBook Air M1 (A2337) with LCD screen damage from pressure — there's discoloration/dead spots on the display but the laptop still turns on and works fine otherwise. Could I get a quote for a screen replacement? Also wondering if you have both OEM (genuine Apple) and high-quality aftermarket options, and what the price difference is between them? I'm hoping to get this done within a 3 hour window if possible.

We have NBN network, with a google nest mesh system. We have issues getting the printer connected, and want to be able to print, scan, etc from desktop computers to desktop computers. Brother MFC unit.

Need to have another RJ45 port in a different room. We have NBN box in garage. From there it runs to a study and study has an RJ 45 port. We need another RJ 45 port I.e. LAN cable run to the room next to study. About 5 meters away

I am looking for a data point installer for 4 data points and install network rack

Unable to establish a connection from our Netcomm NF20Mesh to Opticomm Network.

system will need to inspected specially power supply and reprogrammed entire circuit to reset existing password/code As no body knows the old code