Find experienced local carpenters in South West Perth

Hob I have a wooden surround on my kitchen hob with an epoxy varnish. I want the epoxy removed and the wood revarnished. The job was started (see photo) and the epoxy came off the front but the sander was too wide to reach down the sides and the back to the remove it all. Needs some slim fitting piece that can get into little places. Or else you could lift out the hob piece and sand it and varnish it and then put the hob back. Thanks

I need a carpenter/handyman to replace the shelf in my walk in wardrobe, as you can see by the picture we have tried to many times to attach the rail to the chipboard, and it is now beyond help and needs fully replacing, I also have a mirrored 3 door wardrobe that needs a shelf and hanging rail installed

To build a timber seat riser , approximately 87cm width x 47cm depth and height 7cm.

I need a long laundry cabinet for the undercover area outside my laundry The area is pictured. It will be closed in on the long side by suntuf multi wall polycarbonate so the cabinet will somewhat protected but still semi outdoors Materials I’m looking for a marine plywood cabinet Stain merbau colour and coated with marine varnish I’d prefer tight cabinetry work in order to limit the access of insects. I have provided a drawing with details about the inside, outside and top. My amateur measurements are given. I measured twice but I recommend these measurements be used for pricing and you remeasure before cutting. The length is just under 5400mm The depth will need to be 550mm internally The height is 950mm externally (with drawers being 200mm high and the doored height being 650mm). The remainder will be needed for the 30mm top and kick boards They should be 9 doors with a pull out mechanism for laundry baskets -inspiration photos are attached. I’d prefer tracks at the top and bottom of the baskets for stability. -A rust resistant material will be needed for the tracks given their location. 9 drawers on top of the 9 doors. 2 coats of marine varnish inside 3 coats of marine varnish outside See drawing and photos Quotes within budget and outside budget are invited. Please include labour and all materials I am very committed to completing this project and would appreciate your quote.

Dear taster. I am ready to hire a cabinet maker for a custom desk. Quotes inside and outside of budget are welcomed. Please quote for labour and materials made from birch plywood for the following: Thanks L shaped Desk 800mm high -Short side of L= 600mm depth and 1280mm long -Long side of L= 400mm depth and 2400mm long -Round edges -three or Four drawers underneath the end of the long edge = 400mm deep and wide, 200mm high. Shelf above with closed in ends 1800 long and 400 high and 300 deep. Attaching to brick and plaster. Image of style is attached. Please see drawing for general idea but measurements are in the text above. Photo is of wall but it will be cleared. The top of the desk will flow from the windowsill. I’d like the shelf and drawers to be birch plywood 18mm (2400x1200=$140 in Bunnings) And the desktop should be birch plywood 30mm ($353 from ply online https://www.plyonline.com.au/products/birch-plywood-bb-bb-exterior-glue?variant=44465049108633) Many thanks, Best wishes Dee

We have installed a range hood in an old kitchen fire place. We need to fill in the gaps between the range hood and the rest of the space in the chimney space. It should be a relatively simple job for a skilled carpenter. Space is11 cmx63cm and 15cmx63

I want to install an integrated dishwasher into current kitchen. There is space for the dishwasher but it requires a panel, plinth and some adjustments of the cabinetry to looking fully integrated. A small job but requires professional finish. Please only make an offer if you have qualifications and previous work to show. Price shown is nominal- very happy to discuss price with the right person.

Cabinet maker needed to take out old slide out Rangehood and install a new one. Can arrange the Rangehood or would love it if you could provide and quote supply and install

Looking for someone experienced to supply materials and build a freestanding timber slatted cover for an outdoor air conditioning unit. Approx dimensions: 2000mm (W) x 1000mm (H) x 500mm (D) Requirements: • Must be freestanding (not fixed to wall) • Easily removable for servicing access • Slatted/louvre style to allow good airflow • Suitable for outdoor conditions • Clean, neat finish - ready to paint. Scope: • Supply all materials • Cut, build, and assemble on site (or deliver assembled if practical) Location: North Coogee Budget: Open to quotes (expecting fair Airtasker pricing for supply + build) Timing: Flexible but ideally within the next couple of weeks Please include: • Examples of similar work (if you have them) • What materials you’d propose • Estimated timeframe Thanks ☺️

Need to add doors on to linen closet in a hallway as I dont like open storage.

Build shelves in cupboard

Needing two melamine shelves built in laundry cupboard asap. Just on the right side. Image attached. More shelves required throughout the house over time, so likely to rebook. Quote negotiable.

Can you help us complete a few odd jobs this weekend? A few items of furniture in our home & need fixing. We have all the wood, fittings, and tools, and know-how to fix. We have just run out of time as we are preparing for an AirBNB. We are looking for a qualified carpenter or cabinetmaker with some spare time. What needs doing *****NOW***** - 4 legs from outdoor cane/wooden chairs - 2 legs from sofa (one wonky, other fallen off. ******LATER ****** (not included in budget) & only if you want more work & are interested - Assist to build timber bench seats on a 30 foot timber boat located in a marina on same street as our house. This task is not included in the budget for this task..we can chat and show you when you come for the other…so you can assist to agree the fee as its hard to estimate the time required so have not added here)

Im after a wood table insert made from pine or something light in three pieces. The insert is to cover a vaulted board game table. Its Roughly a 1110mm x 1110mm square but it might need to be planed on a side or two to fit properly, it also needs to be 23mm thick to sit level with the rest of the table

Wood to be cut/trimmed to fit new induction stove top

Hello I need a cabinet shelf replaced as it has water damage if that’s possible instead of replacing entire cabinet.

I need a shelf built and installed under an existing area to store shoes. It needs to be sturdy enough to hold multiple pairs of shoes. The shelf will need to be measured, supplied (materials), and installed. Open to suggestions on design (simple wooden shelf is fine) • Approximate width:143cm / depth 45cm/ height (still needs to be measured, as I am not confident with my measurement) • two shelves - open to suggestions • Painted white

Install or build bookshelves

Carpenter needed: I have a bed frame with a large wooden piece down the middle. This has snapped in half. I need a new piece to replace it (it’s an odd thickness, not an easy Bunnings find). The hardware needs to come off the old pice and be put back on the new piece. It has a metal bracket on both ends and three round metal pieces the legs screw into.

I need trimming of 5 wooden doors so carpet can fit underneath