Find experienced local carpenters in East Fremantle

Hob I have a wooden surround on my kitchen hob with an epoxy varnish. I want the epoxy removed and the wood revarnished. The job was started (see photo) and the epoxy came off the front but the sander was too wide to reach down the sides and the back to the remove it all. Needs some slim fitting piece that can get into little places. Or else you could lift out the hob piece and sand it and varnish it and then put the hob back. Thanks

I need a long laundry cabinet for the undercover area outside my laundry The area is pictured. It will be closed in on the long side by suntuf multi wall polycarbonate so the cabinet will somewhat protected but still semi outdoors Materials I’m looking for a marine plywood cabinet Stain merbau colour and coated with marine varnish I’d prefer tight cabinetry work in order to limit the access of insects. I have provided a drawing with details about the inside, outside and top. My amateur measurements are given. I measured twice but I recommend these measurements be used for pricing and you remeasure before cutting. The length is just under 5400mm The depth will need to be 550mm internally The height is 950mm externally (with drawers being 200mm high and the doored height being 650mm). The remainder will be needed for the 30mm top and kick boards They should be 9 doors with a pull out mechanism for laundry baskets -inspiration photos are attached. I’d prefer tracks at the top and bottom of the baskets for stability. -A rust resistant material will be needed for the tracks given their location. 9 drawers on top of the 9 doors. 2 coats of marine varnish inside 3 coats of marine varnish outside See drawing and photos Quotes within budget and outside budget are invited. Please include labour and all materials I am very committed to completing this project and would appreciate your quote.

Dear taster. I am ready to hire a cabinet maker for a custom desk. Quotes inside and outside of budget are welcomed. Please quote for labour and materials made from birch plywood for the following: Thanks L shaped Desk 800mm high -Short side of L= 600mm depth and 1280mm long -Long side of L= 400mm depth and 2400mm long -Round edges -three or Four drawers underneath the end of the long edge = 400mm deep and wide, 200mm high. Shelf above with closed in ends 1800 long and 400 high and 300 deep. Attaching to brick and plaster. Image of style is attached. Please see drawing for general idea but measurements are in the text above. Photo is of wall but it will be cleared. The top of the desk will flow from the windowsill. I’d like the shelf and drawers to be birch plywood 18mm (2400x1200=$140 in Bunnings) And the desktop should be birch plywood 30mm ($353 from ply online https://www.plyonline.com.au/products/birch-plywood-bb-bb-exterior-glue?variant=44465049108633) Many thanks, Best wishes Dee

I would like my front porch decked and spread out past the porch into the grass. Current photo (0.5 lens) is attached plus photos of the garden, doorway, and a drawing of the new deck. I can supply the planks only. Please quote the fee you’d like for LABOUR and materials besides the composite decking planks (nails etc). Looking for a slight curve on the corners. And the installation of two (or quote for three if you think we need three) posts for a shade sail. I’ll supply the posts too. Thank you. Completed before Christmas would be great but I’m open to quotes for January too. Please say which when quoting. Thanks.,

Hi There.. I have a cool job I would love someone to tackle. I want to build a step down from a door and would love to use some left over travertine pavers as the platform of the step. It will be outside in the weather so thinking it would need to be a hard wood with a weather protectant over the top. I would be happy to deliver the pavers to you.. and even collect the wood required (assuming Bunnings can cut to size?)

Need someone to install replacement feet for a wine cabinet

Hi I need some walk in wardrobes added to a bedroom. Some laundry shelving and draws installed. Some single kitchen doors added and some hinges fixed in a corner cupboard. Also need 2 large wall recesses in the living room fitted out with small cabinets and shelving. Ideally someone creative to help with design. Thanks

I want someone to cut some wooden planks and secure them together to create a new and extended decking area around spa and a small seating area.

Mounting 3 rows of marine grade stainless steel wire horizontally on solid pillars at end of pool as well as on a pillar going vertically and horizontally on terrace (no photo) but could provide overall lengths of wire if needed.

Looking for a carpenter or someone skilled enough to make a custom outdoor dog kennels for my dogs large enough for 2 small bulldogs. Must be weather proof and insulated - Due date: Flexible

I would like trio wooden backdrop made for me, 1 with half circe on top end and 2 with quarter circle, see photos. Must be able to stand up as will be used for backdrops. No need to paint just need them constructed. I will supply materials if needed, just looking for someone to do the labour. - Due date: Flexible

Hi there, 3 different jobs to be done at the same time: - convert a walk-in wardrobe in en-suite bathroom (it's next to the main bathroom so water access is nearby). - build wardrobe cabinets in bedroom which would include moving an air conditioning unit. - build a custom shed like structure in the backyard with a concrete slab. Cheers, Béatrice Cheers, - Due date: Flexible

Need two fitted cupboards (2 x 1020w x 850h x 450deep) and 10 shelves (450mm x 1020mm) to fit in recesses either side of a fireplace - Due date: Before Friday, March 31, 2023

Design, build and install if a custom, built in library cabinet - enclosed shaker style cabinets at the base with shelves going to the ceiling.White colour so wood can be pine. Size approx 2.5m long, 30cm wide and 2.4m ceiling height (heritage home). - Due date: Flexible