Find experienced local carpenters in Mount Martha

As you'll see from the images, the wooden frame to the bottom of the front windows needs replacing, below the two middle glass panels, and likely under at least 50% of each of the outer window panes. Also, likely on the inside of the window (under the central two window panes

Need cutout in wooden bench top enlarged to fit a new gas cooktop We have a 50mm thick tasmanian blackwood benchtop 865mm x 600 mm, that sits abutting a tile wall to the back and left side . It sits over slide out drawers The current cut out is 430mm deep by 805mm wide. We would like to make the cut out 472mm x 830mm to fit a new gas cook top the back of the current cutout is 80mm from the vertical tiled wall Due to draws and surrounding cupboards the new cut needs to be such that 42mm comes off the back of the current cut out and and 25mm from the left side of the cutout. The cut along the tiled back wall is only then 35mm or so off the tiled wall so its a tight cut Or Maybe take 30mm along the front edge and 12mm off the back edge as well as the 25mm from the left side The tiles are not to be damaged in this process

• New Roof over deck - current roof doesn't have enough fall • New Deck • Small extension of deck and roof line • Built in BBQ area

Deck needs sanding and stain

Get water stain out of couch

We have a circular poly finished dining table (1.5m diam) with a metal alloy base. I want to change the colour to match floor and refinish (prefer not poly). The top can be detached for it to be taken away (or it could be taken away complete if preferred)

I have had a home DIY project go wrong and now need someone to re-make my kitchen cabinet doors! I would like them to be made in the ‘microshaker’ profile. Painting not required - just leave as MDF. I have the hinges so would only need to supply MFD material These are my measurements for specifics: Doors x 13 in total 445mm x 750mm x7 400x750mm x 6 Drawers x 6 in total 625x300mm x 1 635x340mm x 1 445mmx185mm x 4 Picture of the kitchen for size reference and style of shaker door profile I would like below

Needing a stainless steel welder for a small job in mount martha

Poor equipment doors broken. Doors need realigning and wood screwed back on existing door frame. I have all materials just needs a repair as good as is possible.

1 x Office/study fit out full wall iv cupboards with doors (spotted gum veneer), 1 x linen closet (interior shelving) and 1 x bedroom wall unit/ study nook (floor to ceiling). Must organise a time to measure and quote onsite

Deck to be cleaned and restained. Realtively new timber boards (3 years old). Very straight forward - no repairs or replacements required. Just clean and stain.

Wooden garage door to be restained. Wood itself is quite thin.

Remove sliding doors from cupboard and supply and install standard hinged doors and three wide shelves, cut down two barstools, replace one passage door handle set, patch one floorboard - task for labour cost with materials at cost price on top of

Hi team Looking for a professional handyman to assist with install of: 2x Hitch wall shelves (from blu dot) wall 5 x cabinet handles for new joinery unit The wall shelves require affixing to wall but have own legs to support it on floor - so should be straight forward. 5 x Handles to be installed into brand new custom joinery unit Pics attached of type of shelves & handles to be installed Need completed on Monday 12pm onwards if possible Thanks - Due date: Needs to be done on Monday, 18 December 2023

The drawer sides have become unglued. Either repair or remake. I believe basic inner drawers can be purchased from Bunnings (Kia ora). Use the existing drawer fronts and handles. I can provide photos of the damaged drawers. - Due date: Flexible

Wanting a custom built in wardrobe. Nothing fancy just need more storage - Due date: Flexible

Come take a look onsite to determine the extent of the work required and provide proper quoting services. This is in regards to fixing cabinets. - Due date: Flexible

Old cement fibro home, requires someone with carpentry skills to replace rotting timbers and replace some supporting beams. There is also a timber gate that needs to be re-framed - as the existing frame is falling apart. Due date: Needs to be completed ASAP.

front and back deck (with steps) to be sanded and stained. - Due date: Needs to be done on Saturday, 18 March 2023

We have a US style letterbox with the red flag. Need someone to construct a freestanding post with a ledge for the letterbox to sit on. And concrete into ground. Measurements and drawings can be provided. 3 pieces of timber required, post to have a pointed top and ledge will require a curved finish. - Due date: Flexible