Find experienced local carpenters in Kambah

Assembly and installing Bunnings Laundry cabinets and benchtop Removing kitchen cabinet for dishwasher

We are looking for someone to build a double carport at our property in Kambah. - Due date: Flexible

I have ooz roo tub rack that needs to be built from flatpack. - Due date: Flexible

Sand lacquered kichen bench tops and also remove and replace timber corner panel - Due date: Flexible

We have had a studio built on our property that we need plans drawn up for for a DA application. It is only a single room with a door and window, approximately 32m2. Looking for a qualified draftsman and need it done ASAP. - Due date: Flexible

Double glass doors supplied, build frame and install doors. Dimensions approx 1560mm wide x 2100mm high - Due date: Before Tuesday, 13 December 2022

Need to install 8 x 3.5 gagarge shed with roller door. Concrete slab is already laid. Looking for someone who can get the job done mostly per hour basis ~60$

We need a window (approx 200x160cm) installed. The wall is plasterboard/blueboard and a window frame will need to be built.

Hello. Looking for someone to put the finishing touches on IKEA kitchen. We have the pieces to go on. Boards to finish off the island bench. Boards to finish off the tall cupboards. Unsure on how long it will take so name the price. - Due date: Before Sunday, 30 October 2022

Hi all I want to have a wardrobe built to fit the area shown in picture 1. I want a space that doubles as a makeup desk and wardrobe; see pictures 2, 3, and 4 for ideas. I am absolutely open to advice on how to best organise the closet to maximise space and design, but the room for the makeup counter next to the window wall side is an essential. mirroring the matte black finish seen in image (5). Measurements: Floor to ceiling: 239 cm Wall to wall: 153 cm Width: 95cm ( noting the current wardrobe doesn’t go all the way to the width of the wall). Measurements may be off by a few centimetres give or take. - Due date: Flexible

I need a garden shed (3m x 2.4m) assembled and anchored down to an existing paved area. Shed already purchased and comes with instructions. Need to bring own tools to assemble. - Due date: Flexible

I would like custom shelving supplied and installed in my bar area. First picture (black lines) is a variation of how I want the shelves to look (variation of sizes). Total of four shelves. Second and third picture is the colours I want the shelves to be, happy with either (matte black or wood textured black). Shelves need to be able to hold at least 10kg The measurement for the shelf above fridge is 57cm length x 60cm depth. The other 3 shelves measurements don’t matter, as long as they look similar to the pic I drew in - noting the entire length of the bench space is roughly 133cm. - Due date: Flexible

Table legs loose/ wobbly and one leg join has cracked apart. Dowel will need replacing on one leg. Need ensure joins are secure / repaired again and table isn’t wobbly - Due date: Flexible

Seeking experienced garage/shed assembly people to assemble a skillion roof 6x2.8m garage with glass sliding door and window, and a rollerdoor. All parts on site and close to the slab which is already down. - Due date: Flexible

Hi! I need someone who is handy on the tools to cut and install some ply boards inside my van, and some other small things. I have the ply already and some fresh screws but have no power tools to do it myself. I am happy to pay for materials needed and around $200 for the job. I have the measurements and the templates you'll need all here and will be around working on it at the same time. I can drive to you within ACT borders. I'll be free this whole long weekend for the job to get done :)

Seeking to have someone source and install 100sqm of underfloor insulation in an existing home. - Due date: Flexible

Must be wooden, apex shed and flight with covered roof. Internal flight in shed( only small), but from roof to floor, internal door from shed to flight area. - Due date: Flexible

I am hoping to get an Absco Sheds 2.26 x 0.78 x 1.31m Bike Shed put together and anchored on a slab in my carport. Looking to have the job done between Tuesday 15 Feb and Saturday 19 Feb. https://www.bunnings.com.au/absco-sheds-2-26-x-0-78-x-1-31m-bike-shed-monument_p0115321

Looking for quotes on some someone who is able to make some “box” couch legs as displayed in picture preferably of steel but would consider timber - (happy to paint them myself if timber) Measurements would be 120mm x 1560mm QTY 3 120mm x 800 QTY 3 Please leave quotes below :)

Quote for replace and install two built-in wardrobes. Master requires three sliding mirror doors, 2nd bedroom requires two sliding mirror doors and jambs with quality finish. Interior function: drawer space, shoe space and space for full clothes hanging. Would also potentially consider removal of existing doors only and replace with quality sliding mirror doors. - Due date: Before Friday, 19th Nov 2021