Find experienced local carpenters in Canterbury NSW

Looking for an experienced and skilled handyman to convert my existing wall unit into a custom built-in feature. I already have the cabinetry assembled and positioned. The main cabinetry sections are already connected together, so I do not need the entire unit rebuilt or reconfigured. I have an additional matching cabinet section (shown in Photo 1) which was removed from another part of the same furniture system. I would like this cabinet section securely attached on top of the left-hand side of the existing cabinetry, as shown in the marked-up photos. What I need done: • Securely install the additional matching cabinet section on top of the left-hand cabinet as shown in the photos. • Build a custom frame around the cabinetry to create a built-in appearance. • Reattach or replace skirting boards as required around the finished installation so it looks neat and complete. • Leave all framing, bulkheads and trim ready for finishing. I am happy to stain, paint or finish the new materials myself after installation. However, if you are able to colour-match and finish the materials as part of the job, please let me know and include this in your quote. Important: I am not looking for new cabinetry to be built. The existing cabinetry will remain. The goal is to create a custom built-in look around what is already there by adding the extra cabinet section and constructing the surrounding framework, bulkheads and filler panels. The red markings in the photos show where the additional cabinet section is to be installed. The green markings show the areas where I would like framing/bulkheads/filler panels added to achieve the built-in look. Please provide: • Confirmation that you can complete this type of work • A full quote including materials • Your availability this week • Photos of any similar cabinetry, built-in joinery or carpentry projects

Cabinetmakers only please. A general handyman was not able to fix this issue. We have a large soft closing kitchen cabinet that has had the front break and fall off. We want it repaired and are not sure if parts are missing. Happy to pay extra for replacement parts.

Create access through wooden floor for plumber and then patch up after plumber is finished. Size about 400 x 400 mm.

Hi there, Looking for a trade specialist to repair a fascia board along the roofline and replace a few rotted timber framing on the deck.

Kitchen cupboard has randomly stopped closing. I think there is an issue with the hinges but not 100% sure.

Install a bathroom shaving cabinet on tiled wall.

Carpenter needed to repair bed. Need to nail side rail of bed to headboard slat. The bed frame was pulled in the wrong direction, and so screwed-in side rail got disconnected from headboard slat. Should take less than 30 minutes to an hour, to re-screw or nail in.

We just moved in and the top of our fridge is hitting the bottom of cabinet doors. We managed to get the doors off but need someone to come and attach slightly higher so they don’t hit the fridge. There’s enough room at the top to lift them the amount we need. One of the hinges is very close to the fuse box and we struggled to get our screwdriver in there. Looking to get fixed asap.

Hello, We had reclaimed wooden benchtops installed and are unhappy with the mark on one of them. Option 1 We would like to have this piece cut out and a new piece installed. Happy to discuss the best way to do this and the best size of the piece to remove. We have a piece that covers the entire size from the cupboard to the stove stop. Or could we just replace a small section at the front? I'm aware this would add a join but think this is better than the current mark. Option 2 Sand and refine this area. This has already been sanded and is now lower than the surrounding area so am wary to sand more but potentially this is an option.

Hello, We would like someone to cut and install wooden benchtops for our new kitchen and laundy. We are getting reclaimed timber and it will need to be cut and installed as follows. Measurements are approximate. We'd also like the edges rounded. Kitchen bench 1: (thin bench on left hand side ofplan): 2220 X 300 Kitchen bench 2: L shaped: 1904 (under window with cut out for sink) and 1535 (with cut out for stove top). Depth is 600. Wastewood mentioned that this would be two pieces with a join (or if it needs to be more than two pieces, please let me know). I've measured with the join on the longer side of the bench (i.e. not under the window) but happy for this to be moved. Note that the darker yellow section is a pantry so no bench needed there. Laundry bench: L shaped: 1600 (with cut out for sink) x 1000. Depth is 600. Happy for joins as needed. I have also attached photos of the current kitchen. The benches will be the same as the current benches expect there will be an in bench oven rather than standalone. The laundry does not currently have benches to photograph. Our cupboards are being installed on the 16-17 Feb so after this but as soon as possible after would be great for install. We would also like to include pick up of the benchtops (X2) and delivery from Marrickville. They're 2.2m long but can be cut shorter before pick up if needed and in line with the install requirements. If delivery is not possible, we can sort that part. Thank you! Rose

The drawer bottom panel groove is on the wrong side, so the base doesn’t fit. It needs a new groove, it’s about 40cm. I can bring the drawer to you. Should be a quick, simple fix.

Needing an extra set of hands for the day tomorrow to assist my husband with assorted finishing jobs on our renovation incl. - installing skirting board in 1 bedroom - installing trim on floating floor in 2 bedrooms - installing kickboard in kitchen if there’s time

Replace 2 x internal doors, jamb and trim. Cut 1 x solid internal door to size, hang and build out jamb to fit. Materials provided.

Wooden table has burn mark from candle. Will pay for materials required to fix.

There are in total 6 doors. 5 doors are already removed. The bottom edges need to be filed down and then fixed. Sample photos attached.

Needing some to install ready bought cabinets in a laundry room

- Remove doors - Remove shelf - Cut and remove top panel - Cut and remove base - Cut and remove kick board

I’m looking for someone to build a simple and minimalistic wooden support stand for my DJ equipment (2 CDJs). The stand needs to: - Be sturdy and capable of supporting the weight of the CDJs. - Have an angled design for ergonomic use. - Be made from wood (I can supply the material). - Dimensions: 610mm (width) x 400mm (depth) x 400mm (height). - I’ve attached a drawing guide to provide a clearer idea of the design. Clean craftsmanship and functionality are key. Let me know if you can assist and feel free to share examples of similar projects if available. 😊 Please send me some quotes? happy to discuss the price Thanks

Need to fix the wooden drawers of my side table

Line kitchen cabinet with timber panels. Replace skirting board