Find experienced local carpenters in Camp Hill

I need someone to sand my deck and re do the stain. I already have the stain so that will be provided. Deck is about 7m x 3m.

We’re undertaking a kitchen renovation and where the old kitchen was, we need to replace those boards, blending the old and new. We have some older boards available but will still need more. A site visit would be needed for this one.

Replace rotten timber and then sand and restain please.

We are wanting to replace one side of our deck with timber slats (remove balustrade and have slats all the way up) . We then want to add timber slats to the stair area above the railings. The side of the deck: 3900w x2100h Railing above stair railing X2 1100w x 900h Quote to include white paint/supply/build/install and removal of old balustrade/privacy screen Thanks!

6 - 8 palings placed on verandah deck. Already purchased and ready to cut and install.

45 min job. Put the final coat of stain on my deck & Screening The first coat took me 45 mins. But I hurt my back. Deck staining experience required.

- Carefully remove Blackbutt timber flooring panels that are glued down (water damage). Around 20 panels give or take a few, most panels are 1m x 0.15m roughly or smaller. Ensure no damage to surrounding panels. - Remove skirting in all around garage - around 30m or so. Remove carefully to enable future re-use of the skirting. Photos attached

Replace two posts, both supporting upper deck. Replace sleeper. Repair railing on front stairs. Replace part of decking that has rotted.

Need woodwork help fixing a gap created on a cupboard due to an installation of a smaller oven. The idea is to use the wood on the photo and make a small door that looks similar to other doors on the cupboard. Of course the new compartment needs to have a solid base for storage.

I need a carpenter to help me for 10 hours I am finishing a new frame

One rotten timber supporting sheeting over the window requires replacement. Working at height, roughly 4m up.

I’m looking for someone skilled to remove existing glass panels and a door in front of a wine storage cavity in my home. I need custom shelves installed—three to four rows at head height and above—that are specifically tailored to fit the cavity. The shelves will be used to display whiskey bottles above a large wine fridge. The job involves carefully removing the current glass structures and then installing the custom shelves. I also have an electrician who will be installing lighting within the shelves, so I’d need you to coordinate with them to ensure everything fits together smoothly.

I’m replacing my gas cooktop with an induction hot plate and need the existing hole to be 5mm larger on each side.

A bit of long shot here. I have a media room, and will be sitting speakers behind the doors in the picture. I am looking for someone with the skill / capability to cut out a neat 40cm x 30cm hole and frame/ add speaker cloth to it. I am happy to deliver the doors to a workshop if needed, and provide the cloth. The job requires someone who can neatly cut to dementions, and be able to neatly frame or place the cloth. Some picks for inspiration

As per the image provided, we have three of these areas measuring 270x130cm which need covering using either wooden or pvc cladding

Range hood is currently 550mm from gas cook top. To meet standards it needs to be 650mm. We therefore require the kitchen cupboards above the range hood to be reduced by 100mm to allow a new range hood to be installed at 650mm clearance from gas cook top.

Need a shed build 2 x 2 m

Replace 12 tread staircase at rear of house, all materials will be pre ordered and supplied for the job. Would prefer an hourly rate as we need ongoing work after the stairs are complete.

1. Build new framing for one small bathroom. 2. Install new skirts for bedroom and living room 3. Minor carpentry jobs in the house

Looking for cabinet maker to quote cupboards for small laundry. Looking for job to be complete by end of august. - Due date: Before Thursday, 31 August 2023