Find an experienced cabinet installer near you

Experienced Cabinet Installer – Detailed Finishing – Start Immediately Lake Orr Dr in Robina. Please note: the photos show cabinetry that has already been flat-packed/assembled and is temporarily staged in completed rooms ready for installation into the adjacent rooms. The photos are not showing abandoned or partially completed installations. Description Looking for a highly experienced cabinetmaker/cabinet installer to complete the installation and finishing of kitchen overhead cabinets and wardrobes. The cabinetry is already built and on site. The job is now to install and finish everything to a ready-to-move-in standard. Work includes: Installing kitchen overhead cabinets Installing and securing wardrobes and other cabinetry Levelling and accurately aligning cabinets, doors and panels Gapping, scribing and sealing cabinetry neatly Fitting fillers, end panels, trims and finishing pieces where required Adjusting hinges and doors for consistent gaps Ensuring all exposed edges, junctions and transitions look properly finished Finding neat, practical workarounds where walls, ceilings or existing structures aren't perfectly square Final adjustments and finishing so there are no obvious unfinished gaps or rough edges Please look carefully at the photos. Some areas are tight and challenging, so I need someone who is experienced enough to problem-solve rather than simply install cabinets exactly as presented. You need to be comfortable being challenged by unusual spaces and finding neat solutions on site. Attention to detail is extremely important—the finished result needs to look intentional, clean and professional from every visible angle. This is not just flat-pack assembly. I'm looking for someone who understands cabinetry installation and finishing and takes pride in the final appearance. Must have own tools, genuine cabinet installation experience and be available to start immediately. Potential for ongoing work for the right person.

Cabinet installation. Largely assembled. Need to be finished up. Robe cabinets to be assembled from flat packs. Total 10 units/room. Drawings available

Looking for an experienced, detail-oriented handyman for a few around-the-house jobs: * Back Door: Remove existing back door, repaint the frame, and hang a new pre-primed backdoor (door, paint and hardware is supplied). * Cupboards: Fix 2 already-assembled wall cupboards securely to the wall. * Sink Bench Cabinets: Carefully remove the remaining old lower cabinets underneath the sink bench. Note: The main benchtop and sink must stay completely intact and supported for now. Please bring your own tools, fixings, and drop sheets. Let me know your experience with door hanging and cabinetry when you make an offer!

Supply and Install a polytec cupboard panel for an integrated dishwasher. 865 x 610 (HxW) is the space. Polytec panel is classic white (matte) Kickboard to match. Handle is Margo Handle 135x26 - 1534211 - Stainless Steel Look mounted horizontally. Not sure on appropriate price - current price put in as a place holder.

I need 12 handles installed on new bathroom cabinetry , so no pre-existing holes. All need to align with each other vertically and horizontally. 3 cabinets across x 4 cabinets down.

Install 25 cabinet handles to my laminate kitchen and bathroom cabinets. There are no pre drilled holes

IKEA METOD wardrobe rail + cabinet installation — Glebe Looking for someone experienced with IKEA/METOD cabinetry to finish installing these wardrobes. The cabinets are already assembled and positioned, and I’ve already measured and cut the suspension rails for both areas. I just need: - Suspension rails levelled and securely drilled into the solid brick/masonry walls - Cabinets hung on the rails, flush and level - Cabinets clamped together and screwed/fixed neatly to each other - Final alignment checked so everything is straight and ready for doors/fronts There are 4 tall cabinets in the bedroom and 3 tall cabinets in the hallway. I already have: - Masonry drill - Masonry drill bit - packing/shims - 6 mm × 75 mm masonry hex screws - Heavy-duty clamps - Stud finder if useful Would prefer someone experienced with fixing cabinetry into masonry and who can do their usual checks before drilling. Location: Glebe, Sydney Please bring any other installation/levelling tools you normally use. Photos show the cabinets and installation areas.

Looking for someone to 1. Take a massage table (heavy) from clayfield to Newstead 2. Pick up mirror from fortitude valley -> install / hang in Newstead 3. Install Cabinet handles

We need someone to put a TV cabinet together

A small cabinet installation,might take an hour or two to finish .

Hi, We had an air tasker come and install our kitchenette and they have messed all of it up so it all needs to be moved down and reinstalled to fix the bench top.

Need someone help install cabinet that we brought, previous guys just installed half only door and cover need to install

I need someone to collect 2 replacement cabinet doors * Height: 600 mm * Width: 250–300 mm from: Pickup: Smithfield NSW Then deliver and install them at: Turramurra NSW 2074 This is a very straightforward job. The replacement doors are already made to size and simply need to be installed using the existing hinges. You will need: * A cordless drill/driver * Approximately 8 small screws The task can be completed any time between 8:00 am and 3:00 pm. Please only apply if you have experience installing cabinet doors and have your own basic tools.

Install cabinet, drill a hole big enough for electrical plug to fit through

Need 8 cabinets installed on floor. Holes will need to be made for plumbing and skirting installed at the bottom of cabinets.

1) Remove old kitchen bench, draws and cupboards. 2) Build and install IKEA kitchen draws, cupboard, dishwasher alcove 3) Cut sink hole and fit into benchtop 4) Drill hole for mixer tap and fit to bench top

Looking to chat with a cabinet installer to install joinery that has been purchased. It’s pre made, will be ready for install, Kitchen, laundry, Walk in robe, 4 other rooms, outdoor kitchen. Have full plans to show anyone interested. Fee is to chat

we have a small laundry and are looking to maximise the space. this means upgrading with some cabinets! we currently have the washing machine and dryer, side by side but we want to move the dryer on top of the washing machine and have a cabinet in the middle with bench space and overhead cabinetry as well. Photo attached is from ChatGPT and gives an idea of what we want

Hey, I need the drawers assembled and installed into two metod cabinets. I’ve installed the cabinets and the first drawer. Job is in Ormond. Thanks

Hi, I’m looking for someone experienced in kitchen/cabinet installation to install a small IKEA setup into a wall nook (see image). This is a small, straightforward job, ideal if you’ve got a gap between jobs or can knock this over efficiently. Scope of work: -Install upper and lower IKEA cabinets into a recessed nook, including fillers -Ensure everything is level, flush, and properly aligned -Secure cabinets safely to wall studs -Fit and align doors, drawers, and handles -Install timber benchtop -Achieve a clean, built-in look (tight to walls, minimal gaps) Important: -Please only apply if you have experience installing kitchens or built-in cabinetry -Must bring appropriate tools (laser level, fixings, etc.) -Attention to detail is key — I want a professional finish When applying, please include: -Examples/photos of similar cabinet or kitchen installs -Brief description of your experience