Find experienced local carpenters in South Moreton Bay

Rebuilt wood structure which support glass door on top of deck. Also to replace few old deckings at the base of the door.

Hello, need a cabinet maker to build / install a cabinet in a wardrobe and a cabinet in a living room.

We're a furniture retailer needing an experienced furniture repairer, cabinet maker or carpenter. Attend home in a Dakabin, QLD, 4503 The situation: one door hangs low and sits proud of the frame. Hinge adjustment has already been attempted and reaches its limit before the door sits correctly — so this needs someone who can diagnose the actual cause (e.g. hinge seating, door or timber movement, carcass out of square) and carry out the appropriate fix on site so both doors sit level, flush and close properly. The job: Diagnose why the door won't align within the hinge adjustment range Carry out the fix on site (re-seat/adjust hinges, ease or refit as needed — bring your usual kit) Check all four legs are fitted and tightened and the unit sits level Take clear photos of the finished doors and the cabinet corners and send them to us on completion, with a one-line note on what the cause was Likely 1–2 hours. The customer is very flexible: Mondays, Tuesdays, Thursdays, Fridays, and weekends all work. We'll connect you directly to arrange a time once assigned. Must have genuine furniture/cabinetry experience (please mention it in your offer), work tidily in a customer's home, and communicate politely — this is on behalf of our brand.

I'm looking to have two stainless steel water tanks made. The specifications are: Dimensions: 1000mm (L) × 600mm (W) × 350mm (H) Material: Food-grade stainless steel (I believe 304 is suitable for water storage) Internal anti-surge baffles, as the tanks will be fitted to a vehicle Fill connection thread Drain outlet thread Vent Could you please provide a price for the two tanks, along with your current lead time? If you require any additional information please let me know. I look forward to hearing from you.

Qualified carpenter to help with making a half door for my laundry. Wanting to keep the original door as is, so will need to purchase (or tell me what kind to purchase) to make this happen. It’s for short term containment of a German Shepherd post spinal surgery, so needs to still have adequate structural integrity and because to use the door handle etc.

Want a custom shape TV cabinet with light timber vj panels. AI picture available

cabinet making job for a kitchen

We are finishing installing our ikea kitchen cabinets, we are looking for a cabinet maker to help plane the cover panel pieces and to assist with planeing kickboards. We have 2 x internal pieces and 2 end pieces and a backing for the island along with kickboard. Ideally either Friday 7th or Saturday 8th.

Laundry renovation pricing Demolition Supply and install cabinets/bench top and paint as required.

I need a small timber to add on the left side of dish washer area and drill hole for the water pipe.

Need a professional carpenter to build a sim rig. I will pay for all necessary items for the build. Please watch the video below as this is what I want too make it look like. https://youtu.be/RCugSBaAUic?si=-dOKZpsynzvTsAjl Thank you.

Replace the timber trim around 2 small rectangle windows and 1 longer side trim

Remove existing caulking and install scotia trim to base of kitchen cabinetry. Approximately 9 metres around cabinetry. The gap between timber floors and cabinets is anywhere from a few mm to 18mm. See photos attached.

I need a carpenter or handyman to come and help on an emergency job. We need to board up windows on a house. It’s a two man job and I’m here solo. I’m a builder - 3 or so hours work. Need to do today onsite asap

Shave bottom off 2 interior doors as scraping on carpet. Also build or fit small shelves into 2 bathroom cupboards. See pictures.

Pool Pump & air con cover 232cm height Timber arranged vertically (reduce climb-ability) Dimensions as per diagram Two fold-out doors to access the pump and hot water system. It needs to be 232cm high to cover the air con unit. We need to keep the structure 1m away from the pool fence. Painted in Dulux clay pipe half. Metal latches & hinges. Solar inverter & battery cover 900wx 500d x 217h With a door on the front panel to access the inverter/battery panel and a roof (for more UV protection). Metal latch/hinges and painted also in dulux clay pipe half.

In my house one small ply is broken from middle under kitchen sink. I want to replace that

Hi there, We’re based in Albany Creek. We had a water leak earlier in the year that has damaged the carcass of a cabinet in our laundry area. We'd like a quote to remove the damaged cabinet, manufacture and install a replacement carcass and reinstall our existing doors and hinges if possible/ if they’re reusable. Is this something you are able to help with? I’ve attached photos. Cabinet dimensions:  73cm high x 91 cm wide x 30cm deep Looking forward to hearing from you

We have roughly 140sqm of deck that needs to be prepped, sanded and stained in Samford Valley. 25sqm of the deck needs to be sanded back to bare the rest is a light sand.

I need kitchen cabinets installed, I’m looking for a qualified cabinet maker to install this small kitchen, Kitchen will be delivered onsite already assembled, just need it installed and levelled (adjustable legs) ready for bench-top to be installed (bench-top install is not part of job). Only base cabinets, no overhead cabinetry Quite a small kitchen only a few cabinets and tall pantry. Please see photos for plans.