Find a professional local car service in Sydney

I’ve purchased a FineVu GX4K dashcam for my Mercedes-Benz A250 Sport and just need professional installation. Details: • Dashcam: FineVu GX4K • Car: Mercedes-Benz A250 Sport • Installation only - i already have the dashcam • Looking for a neat, professional installation with wiring properly concealed • Ideally hardwired so the setup is clean and discreet I’m currently based in ACT, but i regularly travel to Sydney on weekends, so i'm happy to have the installation done in Sydney if that’s more convenient Availability: preferably on weekends, but I’m not available on 17-18 October Please let me know your price, availability and location, and whether you have experience installing dashcams in vehicles. Thanks! 😊

Have a flat tyre still have the wheel The size is 235/55 R17

Installation of Apple Car Play to an Audi Q5. Proof that you have done this task before please, as it is quite technical. Thank you

I bought a reverse camera and radio head unit to replace a broken one in my ford ranger. I’ve run out of time to attempt it and am looking for some help to get it installed. Product is just a cheap one off eBay

Hi, I have a 2011 Mazda 2 with a large nail/screw in one of the tyres. The tyre still has air, but the car was making a knocking sound while driving. The nail is quite large and close to the shoulder of the tyre, so I’m not sure if it can be repaired or if the tyre will need to be replaced. I’m looking for someone experienced with tyre repairs who can come to Zetland today, inspect it and repair the puncture if possible. My budget is $100 for the mobile call-out and puncture repair if the tyre is repairable. If it needs a new tyre, please quote me the total cost before proceeding. Location: Zetland NSW 2017. Please let me know if you’re available today and what time you could come.

After an experienced mobile mechanic to do a pre-purchase inspection on a 2003 Toyota Landcruiser Prado GXL (4.0 petrol V6, auto, 212,000km) I'm about to buy. It's at the seller's place in Darlinghurst — late afternoon/early evening tomorrow (Fri 25 Sept), I'll confirm the exact time with you and the seller. Ideally someone who knows older Toyota 4WDs. Happy with a solid once-over and an honest verbal rundown on the spot

Need someone to pop out around 4pm and jump start the car. I have jumper leads.

As per the summary, front and rear brake pads, the car is in an underground garage where I live, plenty of room to work, I would like to assist with the job where possible. Need you to supply tools.

Sunroof fabric come off need to reglue or replace

Install CarPlay head unit + reverse camera – 2013 Mazda 2 Looking for an experienced car audio installer / auto electrician to install a new aftermarket multimedia head unit and reverse camera in my 2013 Mazda 2. I’ve already purchased the Aerpro AX7510K 6.8” multimedia receiver kit to suit Mazda 2 2007–2014, including the vehicle-specific fascia and installation components, as well as the reverse camera. The job will involve: * Removing the existing factory head unit * Installing the new 6.8” multimedia/CarPlay head unit * Connecting and retaining steering-wheel controls * Installing and neatly routing the microphone/USB connections as required * Mounting the supplied reverse camera * Running the camera wiring from the rear of the car to the head unit * Connecting the reverse trigger so the camera automatically displays when reverse is selected * Testing everything and ensuring the trim/fascia is properly refitted The kit is designed specifically for this model Mazda, so there shouldn’t be any custom fabrication required. This needs to be completed onsite in my underground apartment garage in Surry Hills. Previous experience installing aftermarket head units and reverse cameras is mandatory. Please only make an offer if you have done similar work before, and include a brief note about your relevant experience. I’ll supply the head unit kit and camera. Please bring all installation tools, connectors and small consumables normally required to complete the job.

Fit my new seat cover for the back sit of my toyota (back seats only)

Install My Car Door and Window on My Nissan Pathfinder I have the Door just can’t put it on Also install my Window

I’m looking for someone experienced with automotive interiors/seat covers to install a full set of fitted seat covers (front and rear) in my 2007 MINI Cooper R56, 3-door. I already have the complete set of seat covers. These are specifically designed and shaped to fit over the original MINI seats — they are not loose/universal seat covers. I’d like them installed properly so they fit tight, neat and securely, without wrinkles or loose sections. Installation includes: * Both front seats * Rear seats and backrests * Headrests where applicable * Correct fitting around seat belts, seat controls and other openings * Any minor seat/trim removal required to achieve a proper fitted finish I’m particularly interested in someone who has experience installing fitted/custom automotive seat covers. MINI experience would be a bonus. Vehicle: 2007 MINI Cooper R56, 3-door Location: Erskineville NSW Parking/access: I only have street parking. The car will be parked on the street directly outside/in front of my house, so the installation will need to be completed there. Please let me know about your previous experience with fitted seat covers.

install the carplay for me

I have a 2008 Toyota Yaris with a dashboard clock that has gradually become dimmer and is now not working (circled is what it should look like - it no longer appears). I think this is a common VFD power-supply failure where the six transistors powering the VFD filaments overheat and fail. I am looking for someone experienced with automotive electronics / PCB repair / soldering to diagnose and repair the instrument cluster. Ideally, I would prefer the more permanent modification using a buck converter, rather than simply replacing the six transistors, if this is appropriate for my particular board. For reference: https://perso.aquilenet.fr/~sven337/english/2019/05/25/Fixing-a-broken-dashboard-clock-on-Toyota-Yaris.html Please let me know if you can help!

2014 Kia cerato fuel door won’t close. I think it might need a replacement actuator

Need to service Cupra Formentor, 31.000km

Mechanic must be experienced with the Barra engine. My 2006 BF Fairmont starter motor died and I have a new genuine Ford starter motor ready to install, but I can't reach the notorious top bolt to the bellhousing. I have 3/8" wobble extensions, but I lost the 13mm socket in the engine bay. Car is up on jacks in secure carpark undercover. Please come prepared.

Need someone car-savvy to install this new radio into my 2013 Hyundai i30 and remove the old (standard) one pictured. This new radio was a gift but I have absolutely no clue how to install. Please only contact if you’re able to complete the job! Based in Marrickville

Looking for someone capable for installing third-party head unit and reverse camera into my 2017 Lexus NX200T. Link to exact head unit contained below - unfortunately no installation instructions from manufacturer. https://autossport.com.au/product/lexus-nx-nx200-nx200t-300h-2014-2020-headunit