Find an experienced builder in Inner West Sydney

Have a gazebo that was recently assembled but incorrectly put together and the top connections need to be changed. Should be too complicated I just assistance.

Our driveway needs a convex mirror installed to make reversing safer. The mirror will need to be mounted and angled ensuring we can see it while we reverse out of our garage. We'd love some advice on the best position for it. Either mounted on the wooden fence directly across from the garage, or to the concrete wall of our apartment block.

I need a replacement steel (?colorbond) enclosure that will keep out sun and water from entering the pool equipment setup (see attached picture. The enclosure is about 2.4 in width, 1m in height and 1m in depth. Needs to be done asap thanks.

Bricklayer required to build a small nib wall which is to be rendered on my building site

I have a Stratco Handi-mate A.S delux hinged door shed that needs to be assembled in the backyard. Size is 2.4x2.4m

8 handyman jobs, all pretty small. Putting up curtains rail Assembling and moving IKEA 8 hole Kallax unit from garage to house Securing pergola beam Fix gate hinge Fix binding door Crack in wall Toilet button Hot tap

We started putting the shed together from a flat pack. Got all the sheet together now just needs to have the sheets put up. Unfortunately we can’t find the instructions though.

Assemble shed Side of house

DEMOLITION Of GARDEN DECK & CABANA Hi, demolition of deck and cabana being requested. Any rubbish arises from the demolition needs to be removed from the site as well. Deck that needs removal is approx. 25 sqm and cabana as well. Once removed, group would need to remain as just flat earth (soil) Photos shows deck and cabana that needs removal and ones highlighted in blue are the ones that needs demolition/removal. Thank you

I have council plans for a new driveway. One slab - part of the council footpath - will have to be removed, some concrete which extends past the gate will have to be removed as well. The distance from the gate to the street is approx. 330cm.

I have a lot of bricks and a gate. I would like a front barrier to be completed with bricks. I would also like to attach the previous left part of the gate, back on the bricks. (The previous wall had to be demolished so that trucks could go through and we complete our renovation) Pls note, we have the bricks and the gate. We don’t have the cement.

Brand new garden shed assembled and bolted to cement slab

New driveway electric gate

Pergola painting for front/back yard

Inspect verandah half-posts in concrete bases. Repair or replace. Also review guttering. - Due date: Flexible

The job is to attach shadecloth to the top of an outdoor pergola. The coverage dimension are 5.2m x 2.8m. Refer to the attached diagram and photos. The shadecloth is to cover: - only the exposed area (not the area that is the glasshouse). - only 2.8m of the width of the pergola. It is not to cover the neighbour-edge over the pond. (refer to the diagram) We can source the shadecloth or you can provide the cost to supply shadecloth in your quote. - Due date: Flexible

Looking for someone to assemble a flat pack bike shed. Details below: https://easyshed.com.au/products/garden-bike-shed-2-25m-w-x-0-78m-d-classic - Due date: Before Monday, 18 December 2023

Assembly of 1.5m x 0.78m Flat Roof Shed - Due date: Needs to be done on Saturday, 25 November 2023

Hang supplied festoon lights on interior edge of pergola. I’ve marked the install area in red on the photo. I will provide hanging supplies if you tell me what to buy. The lights will connect to an outside PowerPoint. I’ve done the programming of the lights so no need to configure them. Note that this is a pergola on 2 level balcony and tasked must perform task safely to avoid fall. - Due date: Flexible

I want an experienced person to assemble a 2.9 (W) x .85(D) x 1.9 (H) shed at the back of a car space in an underground Carpark (strata approved) - Due date: Needs to be done on Friday, 10 November 2023