Find skilled builders in Inner West Sydney

Looking to clear and remove all weeds and overgrown grass from the garden strip along a shared driveway verge, and to remove a tree stump that has already been cut down. The strip runs along the length of the driveway and is quite overgrown as shown in the photos. Green waste bin provided, thanks.

On my backyard do the Easyshed assembly on the concrete slob with the anchoring. 1.5m x 1.90m Skillion Roof Shed with the Concrete Fixings (already purchased) https://easyshed.com.au/products/skillion-roof-garden-shed-1-5m-w-x-1-9m-d-classic? Special tool required: Riveting (we have but it is very old)

I am looking for an experienced handyman or roofer to replace the old, dirty polycarbonate sheets on my outdoor pergola. We are preparing the house for sale and want the roof to look brand new and clear Scope of Work: Remove & Dispose: Take down the existing dirty/damaged twin-wall polycarbonate sheets and take them away (Rubbish removal required). Install New Sheets: Install new standard clear corrugated polycarbonate sheets (single layer). Final Check: Ensure all sheets are securely fastened with roofing screws and the area is left clean.

🛠️ Airtasker Job Post — Motorised Pergola Repair (Russell Lea) Task: Repair motorised louvre pergola (jammed + uneven blades) Location: Russell Lea, NSW Timing: ASAP (today/tomorrow preferred) Budget: Open to quotes Description: My motorised louvre pergola has become jammed while partially open. The blades are not rotating together, and a few appear misaligned or stuck, suggesting a pivot arm or linkage issue rather than a motor failure. The motor still attempts to run, but the blades don’t move properly. Looking for someone experienced with motorised louvre roofs, Vergola-style systems, pivot mechanisms, or opening‑roof repairs. What’s needed: • Inspect and diagnose the mechanical fault • Realign/repair pivot arms or linkage • Check motor + gearbox • Restore smooth open/close operation Please comment with your experience and availability. --- Photo 1 C “Pergola blades stuck mid‑rotation — system jammed and not opening/closing.” Photo 2 Caption: “Uneven blade alignment — likely pivot arm or linkage issue.” Photo 3 Caption: “Close‑up of jammed louvre section — blades not rotating together.”

Moving house and need to disassemble Vuly trampoline to store and disassemble and reassemble shed

Clear kitchen and remove

I'm looking for an experienced carpenter or cabinetmaker to build a custom loft bed from full professional architectural drawings (1:10 scale CAD including exploded construction diagram, prepared by a qualified architect in Germany). Drawings are in German but I can translate — they are so detailed and professionally produced that an experienced carpenter will have no trouble. No design work required. Key dimensions: — Platform: 2000 × 1600mm at 1300mm height — Ceiling height: 2550mm, floor to ceiling structure — 4 storage stairs running along the wall with drawers and hinged doors (sage green fronts) — Under-stair storage zone with hinged pendulum doors — designed to fit a garment rack and chest of drawers underneath — Blackened steel flat bar railing along the open face of the platform Timber brief: Dark walnut stained finish, matte poly sealer. Open to your recommendation on timber species — carpenter to source and supply all materials. Hardwood stair treads preferred. Wall fixings: Freestanding structure preferred for strata reasons — open to carpenter's professional recommendation after reviewing drawings. Safety and structural integrity come first. Optional add-on: Decorative herringbone timber slat privacy panels on two sides acting as room divider. Please quote separately. If too costly, ceiling-mounted curtain track is acceptable alternative — quote both if possible. Location: 2/3 Rayner Street Lilyfield — ground floor studio, direct courtyard access, easy materials delivery. Timing: Approximately late April/May 2026, subject to strata approval. Date indicated is flexible. Applicants must be licensed and hold current public liability insurance — credentials required for strata renovation application. Experience reading and building from technical architectural drawings is essential Drawings shared with serious candidates on request.

Need drafting plans for enclosing a verandah for CDC approval.

Experienced Shed Installer Needed – Slimline F36 Flat Roof Garden Shed I’m looking for an experienced and reliable person (or team of two) to assemble a Slimline F36 Flat Roof 1.07m x 2.105m Side Entry Garden Shed. The shed has been delivered and is ready to construct. Requirements: Previous experience assembling garden sheds preferred Must have your own appropriate tools (including drill/driver, drill bits suitable for metal, socket/spanner set, level, ladder, etc.) Must have required safety equipment May require two people for installation I have the construction video below for reference: https://www.cheapsheds.com.au/yardsaver-garden-sheds-assembly-videos Please provide your quote and availability.

Looking for an experienced installer to assemble a 3m x 2.25m gable roof garden shed (EasyShed – Zinc / 2.05m height). Please: • Have experience assembling flat-pack metal sheds • Bring your own tools • Provide your quote and estimated time to complete • Share photos of previous shed installations (if available)

We have recently patched up our ribbon driveway with concrete and are needing some filler for some cracks. Concrete has been pressure washed, and started painting the driveway partially but it’s the wrong colour. We need someone to give this a quick 1-2 thin coats of driveway paint making it look fresh with clean edges. No need for primer, we are looking for just a cosmetic uplift not durability due to selling next weekend. Berger Jet Dry concrete paint in charcoal will be supplied. Will need to bring own painting equipment though. More photos to come

Approx 6.2m long x 700mm wide concrete strip footing along boundary for driveway edge and fence. Direct street access. Please include: -Formwork to pre concreted level -Roadbase spread throughout and compacted -expansion where required -sl72 mesh -high strength concrete Levels to be confirmed on site.

I have a pre-fab shed kit that needs to be put together. Pretty simple 1M x 1.5M kit. I also need 3 painting hooks installed on my wall to hang a series of paintings.

Shed assembly from Bunnings

I bought a shed from Bunnings,it is 3 meters by 0.78m and is still in the box..I need a good person to assemble it together for me

I bought a shed from Bunnings,it is 3 meters by 0.78m and is still in the box..I need a good person to assemble it together for me

Existing pergola roof no longer opening and closing. Not sure if I need a new remote or there's some other issue...

Keter Darwin shed to be assembled in garden. 1.9 x 2.4 metres. Comes with instructions.

I would like someone to construct a small awning / pergola down the narrow side of my house to store my bikes out of the rain. The structure would need to attach to the side of the house. The long side of the awning would be attaching to a modern Hardie plank weatherboard clad wall, whereas the short side would need to attach to double brick. In the diagram below, the res depicts the structure I'm requesting to be built. Dimensions would be 5.2m by 0.9m. It would need to attach to the house at about 1.9m above the ground with a gentle slope so the rain could run off (no need for a gutter). So likely to need brackets and some support frames to then hold up something like a Suntuf polycarbonate clear plastic roofing. Please see photos of the area in question and aerial sketch. I would be keen for someone to inspect the site so we can discuss best design & materials before purchasing the materials. The main discussion points is probably whether it would require a support post at the near end. Im happy to either purchased myself or you can, but either way I will fund the materials so please don't include those in your quote.

I plan to buy a tool shed from Bunnings. https://www.bunnings.com.au/absco-sheds-3-0-x-0-78-x-1-95m-monument-ezislider-double-sliding-door-garden-shed_p0374571 I need someone to install/assemble it for me.