Find skilled builders in South East Melbourne

New tiles required in outdoor area

Looking to prepare and repaint driveway, aprox 22sqm. Looking for site inspection to provide quote and discuss options

Garden/tool shed to be installed on existing Concrete slab 6x2.5m

Install the shed on the slab. I’ve already put the panels together.

Hi, I need a small rectangular section of my concrete driveway prepped, reinforced, and poured to match the existing slabs. You can see the exact area in the attached photos. It has filled with mud and weeds over time, which will need to be cleared out first. ​Scope of Work: ​Excavation & Prep: Dig out the mud/weeds/soil to approximately 150mm depth to allow for a proper compacted road base (50mm) and concrete slab (100mm thick to handle vehicle weight). ​Formwork & Doweling: Supply and install a straight timber form along the left garden edge. Drill into the existing concrete slabs on the right/ends and insert steel starter bars/dowels to tie the new patch to the old driveway (preventing independent shifting/cracking). ​Reinforcement: Supply and place steel mesh (SL72 or equivalent) on plastic chairs. ​Pour & Finish: Supply and pour standard strength concrete (minimum 25 MPa). Screed it level with the surrounding driveway slabs and finish with a light broom texture to match the existing non-slip surface. ​Clean up: Take away any dug-out soil and leftover debris. ​Materials: Tasker to supply all materials (crushed rock base, timber form, steel mesh, dowels, and concrete bags/mixer). ​Please specify in your offer if you have experience with concrete patching and can bring your own tools/mixer. Flexible with dates. Thanks!

Won’t take long. Just need a very long ladder. Need 2 weep holes completely waterproof sealed and a small section off a suspended drive way sealed. These areas have caused water ingress into home

Concrete approx 50sqm Pergola- approx 20sqm

Garden Shed Assembly installation size 3x3x2.1

I am looking for someone with experience in earthworks and access to suitable machinery to help prepare access to my home-based dog grooming salon. The property currently has a steep, muddy slope with no existing pathway. The job includes: Excavating and levelling a pathway from the driveway to the salon entrance Levelling and improving sections of the driveway Creating a safe and practical access route for customers and their dogs Cutting out and preparing the pathway area for weed mat and rock installation (weed mat and rocks will be supplied and installed separately) General site tidy-up of disturbed areas The property is located in Cockatoo, VIC. Please let me know: What machinery you will use I have included a photo of the pathway I am after. I will need the wood beams installed but not the gravel. Photos can be provided, and site inspections are welcome before quoting. Completion before 12 June highly preferred as access is required for a home-based business opening

Build a Modwood base for shed Assemble garden shed

Base coat pillars and beams - supply render - base coat only Angle beads installed already

Pergola Deck Restoration Needed Need an experienced person to restore my outdoor timber pergola deck. Deck has faded/worn dark patches and needs sanding/prep plus re-coating with decking oil, stain, or paint. Tasks include: * Clean/prep deck * Sand worn areas * Apply suitable finish * Restore even look/weather protection Please share experience/photos of similar jobs. Flexible timing. Photo attached.

I am after someone to help install a garden shed - Abasco 3 x 2.26 x 2. Slab already in place. Friday 8 anytime of Sat 9 in the morning

3x1.5m gable roof garden shed

I’m looking for a qualified and experienced carpenter to build and install a pergola on my existing deck.(Pls note budget is an estimate and open to hearing about your quote). Project details: * Pergola to be attached to the house wall * Deck length: 8 metres * Pergola width: 3.2 metres * Pergola height: approx. 2.2 metres I’m happy to supply all materials (timber, fixings, etc.), but I need someone skilled to construct and install it properly. Photos of previous work would be highly appreciated.

Need removal of ~17m timber fence + disposal. Located in Clayton. Looking for quotes.

I Have Absco Sheds 3.0 x 1.52 x 2.08m Skillon Roof Space Saver Double Door Garden Shed needs to be installed this week on non concrete wooden base on corner of the house. I Will Make Sure Base is ready before installation.

Garden shed installation 1.5 mtr X 1.5 Mtr X 2 Mtr on concrete

Hey Mate, how much you would charge to assemble this stratco shed - https://www.stratco.com.au/au/sheds--garages/garden-sheds/handi-mate-garden-sheds/handi-mate-sliding-door/handi-mate-sliding-door-shed-hm3-gun-metal-grey-shmsssdhm3gu/ 3040 x 1190 mm slab - Statco Handi-Mate Sliding Door Shed HM3 (SKU: SHMSSSDHM3GU) shed is HM3 2.21m Wide x 0.85m Deep x 1.90m High - Gun metal Grey, door on the right. (https://www.stratco.com.au/au/sheds--garages/garden-sheds/handi-mate-garden-sheds/handi-mate-sliding-door/handi-mate-sliding-door-shed-hm3-gun-metal-grey-shmsssdhm3gu/) The bush will need to be trimmed

Hello, need someone to put an Easyshed together, thanks!