Find wood fencing professionals in Sydney Northern Beaches

Current fencing fell down, posts rotten. Need to be salvaged as the palings are in good health. Or now one perhaps based on site assessment. UPDATE: I have erected the fence with supports to keep it in place. Pls see new photos - the last two. The TASK now is to provide galv posts set in concrete and set the fence in place. The fence is approx. 25 m long. The Task value is thus updated and request for revised offers. THERE ARE TEN POSTS.

2 posts either side of gate and small blocks of wood that has rotten to be replaced

30m boundary paling fence x 1.8 m graduating down at front of property Galvanized steel posts Remove and dispose of existing fence

Hi there, the site fence has fallen down. It’s a temporary fence and is missing a few bolts and supports which are all on site and or I request that the materials required be purchased and then back charged to me.

The gate is currently very heavy (made from leftover decking wood, and has over time fallen from the weight and not functioning. We were thinking to reuse the wood (if possible!), take the front slats off and replace with lighter weight wire grid sheets similar to the existing fence. The gate post is also needing securing! Price is flexible! Not sure how long this job would take?

Have added photos of the wooden gate

Job has been allocated to a tradie and is now closed. Thanks for your interest

Our pool fence needed to be revised for compliance. So we have new palings 1.8m high about 20m long which need to be painted on one side only. Also a small wooden gate.

Repair and fill in gaps in existing brushwood fencing. Installation of a new boundary brushwood fence

Roll cap on brushwood fence in need of repair

I need quotes on fencing roughly 20~25m. Happy for inspection for a quote.

take down old brushwood fence and remove from site provide and install new brushwood fence along new boundary line provide and install 2 wood slat gates repaid ~4m brushwood fence - adding 100mm to height ( one section with neighbour)

I have a 40 metre wooden fence required to be built plus wooden gate. I would like the fence high. Estimate size Back fence 18.5m (w) x 2.1m (h) - I am hoping to go slightly higher than original fence height - Once I have quote I will need to speak with neighbours for approval. Side fence 20m (w) x 2.1m (h)- same height as current fence. Gate fence including gate 2.86 (w) x 1.8m (h) - same as current fence height Happy with original style unless there is a better way or more modern style that someone can suggest - Due date: Flexible Budget: Please provide your quotes.

Quote for removal/disposal of old brushwood fence. The front fence is about 6 mtrs long and currently 1 mtr high above low cement wall. The fence along the driveway is 9 mtr and approx 1.5 mtr high with an existing gate.

Boundary fence damaded by car - one 2m section brought down; one section damaged. - Due date: Flexible

One side of a metal frame that surrounds a doorway has become rusted and needs to be replaced by a wooden or metal post. You will need to cut the metal frame, fit post and attach post to wall. - Due date: Before Friday, 20 October 2023

Twenty year old 19 metre wooden fence separating two properties needs replacing. Standard 1.89mtr/6ftpalings and posts. Existing fence to be demolished and removed. - Due date: Flexible

need old brushwood fence removed & taken away, outside steps painted, and have Bunnings type bamboo screen installed in place of brushwood fence - Due date: Flexible

install and supply brushwood fence with capping and timber post - Due date: Before Thursday, 31 August 2023

Replace wood panels on driveway gates (straight bottom and top, with top capping). Materials will be provided. No painting required. **UPDATE** Thank you for your time. I have decided to pause this project and post a different, smaller task to fix my pedestrian gate first as a trial, since this is my first air tasker job. Once that job is complete I will proceed with the driveway gates. - Due date: Flexible