Find professional window and door services in Lilyfield

I have been informed that the wall to the left is not a boundary wall and I need to get it repaired myself. The pictured damage to the right is Strata responsibility. I am looking for quotes. You will need to show you have insurance. You may quote over a $1,000.

I need 2 guys to help me with heavy window glass panel and heavy sliding door installation, it would be great if you had similar experience. If everything goes well, should take no more than 3hours

Remove existing timber front door and draught guard from frame, make good frame, and install new external timber front door as per below. I supply door and existing locks, you supply all other materials, tools etc.. Scope from you will include: 1. Pick up external door from Milperra, NSW 2. Ensure new timber door fits to existing frame; new door will need to be shaved horizontally and vertically (less than 60mm overall horizontally and vertically in line with manufacturer's specification) 3. Install hardware, including existing door lock and bolt and handle removed from old door (supplied by me). 4. Install door hinges (supplied by you) and ensuring door swings freely and shuts perfectly, ensuring no draught, air gaps etc. 5. Prime and paint internal and external sides of doors (paint supplied by you, will reimburse). Existing door/frame measures around 2000m x 785mm. New door: https://www.amstimber.com.au/products/victorian-4p-entrance-entrance-door?variant=46775194386644 2040mm x 820mm x 40mm and will need to be shaved down

Installing rubber gym mat flooring over existing floor and need to trim the door by 15 mm You will need your own equipment.

Assemble outdoor wood table Repair kitchen cupboard doors (2) Bathroom tiles repaired… if possible I have the tiles

We need the current hardware removed and a new child-safe lock installed on our glass pool fence door

Double glass doors opening onto deck, the bottom of one glass door has rotted, have tiimber and edgings to replace.

I need a solid core secondary door installed inside my granny flat to help block outside noise. The current door is a security screen type, so I’d like to add another solid core door (and frame if needed) for soundproofing. Please see attached photos for reference. Happy to discuss whether you supply the door and materials or if I purchase them beforehand. Timing is flexible but ideally within the next few weeks. Location : Lilyfield NSW 2040

A full maintenance on Merlin garage door we had for over 5 years

Need to remove security door and frame. Is secured by dynabolts. Want to be able to put the door back at some point. So no need to dispose of door.

I have 4 x old internal doors which need to be removed and 4 x new internal doors installed in their place. Out of the 4 x new doors, 2 are the exact size of the door frames while the balance 2 x doors need to be cut down to fit. No painting required.

1- repair cracked porcelain / ceramic bathroom vanity using touch up kits from Bunnings or similar (product: Rust-Oleum 13.3ml White Tub And Tile Touch Up Kit) 2- create a custom door for subfloor manhole with cement sheet (no hinge required but with a magnet) size approx( 600mm x 950mm)

Sliding doors to be removed from 2 sets of cupboards and one normal door to be unscrewed. One of the cupboards needs to be split into to its two parts. The doors are 2.2m high,

Two person task - We have these sliding stacked doors, the first door has come off the rail. It is stiff and won’t slide / no longer lines up with the lock. We need the door removed the rail cleaned and the door put back on.

Thick, quality, charcoal shadesail fabric possibly custom made to be fixed around carport as privacy wall-screens down 2 sides and across one (road) end only (not house-end; this to be left untouched) to be off floor and possibly just below carport roof (you decide) with said outer road-end made into a 2-door swing-in fabric covered lightweight gate-frame, or lattice pieced gate-frame (or other lightweight method?) for rare brief single car access (carport used for seating area). My EasyShed flat roof 2.25mW by 0.78D by 1.82H (arriving soon) to be put up by you therein resting on thin pavers you recommend. Photo is not my single carport but is same, also as those seen in distance opposite. Note: all double carports are for two houses to share being divided down middle by two steel pole supports at either end ie the double carport seen in far distance is for two houses to share, as is mine. Only half of the double carport, including its shared middle section, is to be screened and gated. Carport measurements are: 450m/177" = the 2 down sides (each) and 300m/118" = road end going across (for your custom-made gate across bottom). The carport roof at outer edges (from ground) is 207m high, at interior 210m high. Suggested lattice (if not making fabric covered gate-frame or other method?) for double gate, is perhaps: Bunnings Jack Matrix charcoal plastic reeded diamond lattice; sizes include: 2410 x 1205 x 5mm 2410 x 1205 x 7mm 1800 x 1200 x 7mm 2400 x 600 x 9mm None of the carports are screened. Mine will be the first. As I have no frame of reference to guide me, any knowledgeable advice, economy saving tips, and helpful suggestions will be appreciated.

Hey everyone, we’ve taken a garage door to do a little garage renovation and need someone to come and put the roller door back on. Should be fairly simple for someone that workswith Garage Doors often.

We have a 3 door sliding wardrobe where the doors keep coming off their runners. Looking for someone to rehang them and fix the problem.

A wheel that sitting in the sliding door of my wardrobe has gotten lose and keeps getting off the track when I’m sliding the door. Maybe the wheel needs to be reinstalled. How would you fix this?

Two doors were removed to lay carpet. They need about 1cm cut from them and then to be rehung. You will need to measure to cut the amount and angle correct. Doors should rehang easily.

I have a Window approx 1,5m x 1,7m that needs to be soundproofed (including the glass because it's plastic). I have no idea about the material that I need but am happy to buy it before the installation day:)