Find a professional tiler in Fawkner

Shower area 40cms x77cms Tiles provided. Board,waterproofing,tiles and grout.All need to be done. Owner already give consent .

Few tiles came out of the shower area . Tiles need to be fixed

Need shower base screeded. I have materials (mapei materials) Shower base is approximately 1800 mm x 1100 mm

Require bathroom floor and shower walls only,floor is 1700x 2200 minus the shower floor 900 x 1200 And the shower walls 900 x 2000 and 1200 x 2000 Tile size 600 x 300

I have a property in Fawkner 3060. I need 36 sqm of tiles put on concrete. 2 bedrooms and a corridor. Corridor is about 880mm wide the wall might be a bit uneven (not straight as it is an old house). Please note that the height of new tiles (bathroom/showers 10-16mm) is different as per photo. The kitchen tiles are about 40mm high. This means either to built it up a bit OR a metal trim Or a combination. Bedrooms floor is slightly uneven as per photo. From quotes that I recieved all of the tiler said 5-6 bags of self levelling. All said it is within normal range and shouldn't be a problem. We will supply 1200x600 tiles. You need to supply self levelling, grout glue and silicon. We also need a tiled step redone and a 2 small patch ups. Please let me know your quote.

Need to remove soap holder from bathroom wall. I have the replacement tile. Needs to be regrouted as well. Can either do just the half tile, or full tile.

Hey, we are wanting to tile our bathroom floor and laundry area - approximately 6.5m2 total area. It is currently vinyl. We will purchase the tiles so the budget is for labour and other materials required for the job. The job will require removal and reinstatement of toilet & doors, and floor prep (working on top of the current vinyl).

Ensuite -lay tiles 600 X 300. cement sheets are laid just requires waterproof .

Cut & Install Stainless Steel Panels + Splashback (Licensed Plumber Required) Looking for a skilled and licensed plumber to complete the following stainless-steel work ASAP: 1. Rangehood Flue Trim Installation • Cut and install 3 stainless-steel pieces at the top of a rangehood flue (to neatly finish the join between the flue and ceiling) • Stainless steel panels will be provided • Clean, flush, professional finish required • Must have own tools and experience working with stainless steel 2. Splashback Installation (Plumber Required) • Fit and secure a stainless-steel splashback (provided) behind a stove and deep fryer • Splashback may need to be cut to fit around water and gas pipes • Disconnection and reconnection of gas and water lines will be required • This part must be completed by a licensed plumber Important: • A Certificate of Compliance is required for the plumbing/gas work • Job must be completed ASAP – ideally within the next 1–2 days Please include your plumbing license number.

I currently renovated my house and now In need of a professional tiler to waterproof my bathroom and tile it. Also have 2x powder rooms I need tiled aswell

Connection fee only Need to tile about 17sqm walls only from bottom to the top 600x600. There will be a small splash behind the sink that will have smaller tiles. Plasterer walls. Please quote per square meter or the whole job.

Need existing tiles off, replace with new ones and tile to the ceiling

remove floor tiles from interior floors across 3 adjoining rooms skip will be supplied

Need a splash back for new kitchen .. working on the cheap. Will need u to quote

Hi! Keen to have the following work completed : 1) old floor tiles and cement sheet underneath removed 2) new cement sheet / waterproofing applied 3) new tiles installed (tiles and grout provided). Bathroom floor dimensions- 1.24 x 2.04. Please note the floor mount vanity will have been removed and a wall hung will be in its place so access under the vanity. Please indicate whether disposing of old materials is included in price. Thanks!

- Regrout tiles around the shower/bath (including the side of the bath, the wall inside the shower bath and the little section at the end, total 4m2 approx) and caulk all edges - re- coat bath - paint all bathroom wall tiles, no regrouting needed, total 10 m2 total approx)

Hello! Keen to have the following done if someone has the skills to do them all! - re grout shower wall and side of the bath (3.5m2 total approx) - remove old shower screen panels x2 - install new wet area panel over existing panel (to cover the hole pictured). New shower panel will already be cut to size and is 3mm thick. Silicone and adhesive provided - install new glass shower over bath screen panel x 1 (noting there are two panels to be removed but only new one will be reinstalled on the long side of the bath) Thanks! Also grateful if you can indicate how long we can expect the work to take/ bathroom to be out of action

Need tiling done in a bathroom

I need to put tiles on a room floor - Due date: Flexible

Grout has fallen out when we had the light tremor in Melbourne a few years back. One line accross and one line down in the shower area . - Due date: Flexible