Hire a reliable projector installation service in Melbourne

Need help to mount my 120inch Screen

I need someone experienced with drilling and mounting hardware to safely install a projector screen in my bedroom. The projector screen is 7.5kg and ideally I don’t want to drill into the ceiling, but open to the possibility if it’s easier/makes more sense. The job involves: Supplying and installing a heavy-duty L-bracket on the wall near the ceiling (about 20cm projection from the wall so it clears a wall light). Drilling the bracket securely into the wall using the correct fixings (studs or appropriate anchors). Adding a strong hook or hook-bolt to the horizontal arm of the bracket so the projector can hang from it. Ensuring the whole setup is level, secure, and able to safely support the projector weight. Please bring all tools, fixings and hardware needed. Located in Brunswick. Looking for someone who has experience with wall mounting / handyman work.

We have recently moved into a house that has a JVC home projector. It all seems to turn on and we have the remotes but don't know how to set it up or work it once running. Require assistance.

I need to source a projector and pull down screen system to be installed in my hospitality venue in Prahran.

When I switch on the projector, it only shows the logo.totally frozen

Projector to be screwed into wall. Screws need to be brought in by tasker.

I have a Govee Star Light Projector that used to work, but may have been knocked and won't turn at all. No signs of power, LEDs or anything. Have used different cables and power supplies. I'm hoping it's a simple electrical problem, but that's a bit out my skills set. Would appreciate anyone giving it ago. https://us.govee.com/products/govee-star-light-projector

- Projector screen dismounted/removed OR - Repair plaster/fascia around old projector screen. - Install mic mounts and mics into roof (cork system) x3. - Swap some of the broken cork panels with others. You will need a ladder to reach the ceiling and ideally a vacuum to cleanup because the cork roof is messy. The cork may need to be cut -- the mic holes can be pretty rough (as the mic will cover it).

I am planning to purchase this motorised projector from Selby and require a handyman, electrician to install this on my apartment (it has plaster ceiling) and location where it needs to be install is attached - its in front balcony windows https://www.selby.com.au/electronics/projectors-accessories/108in-motorised-remote-electric-projector-screen-16-9-psaa108.html?gad_source=1&gad_campaignid=22169699892&gbraid=0AAAAAD-zyGiDRJ2MiwFBx_e4TjbhpunjX&gclid=Cj0KCQjwuvrBBhDcARIsAKRrkjfRaS3bt_LoyNaBU8CwIKBOvLiYQYeujEp0m6EHjBTF-zElfCIuGqkaAqo2EALw_wcB

Mount my Grandview GRPD092H Deluxe Pull Down Roller Screen, 92", 9kg. Projector screen from the ceiling of my apartment

Quotation required. Budget TBC Note: we built this house ourselves and provisioned for a projector during the build so we are confident of both the cable and installation provisions. Happy to send more pictures directly upon request. Equipment Supplied: - Projector: Epson EH-TW9400 (ceiling-mounted unit) - Mount: Epson ELPMB30 low-profile ceiling mount (provided) - Screen: 85″ Grandview motorised recessed screen (already installed) - Pre-wiring: HDMI, speaker, and power cables are pre-run through a removable panelled ceiling, terminating within a shelving unit with wires accessible Scope of Works Required: 1. Install and ceiling-mount projector using supplied low-profile bracket 2. Remove face screw fixed existing ceiling panel to locate pre-run HDMI, speaker, and power cables 3. Terminate and connect HDMI, data, and power cables to projector We do not propose speakers at this stage and will use our existing Apple HomePod to wirelessly connect. We do however want the speaker cable to be connected to the projector ready for when we do buy speakers in the future. 4. Connect existing 12V trigger cable to screen for automated drop 5. Connect to Apple TV (provided) to test video, audio, and screen automation Additional Info: - Ceiling consists of Troldtekt screw-fixed panels (one will be removed for access) https://www.troldtekt.com/products/product-range/troldtekt-acoustic/ - Viewing distance is ~3.0 m; throw distance fixed at ~2.6 m - Installer will need to supply appropriate termination plugs (HDMI, power, data)  

Need someone to drill holes into the wall so we can install the projector screen. Also need to fill in holes which were previously used.

office training room: bring ladder and simple tools to get to projector off ceiling mount, take down and replace lamp and put projector back up

Looking for a skilled, reliable installer to help with a two-channel projector installation at an art gallery in Richmond on Monday 31 May and/or Tuesday 1 April. What’s involved: - Installation of two projectors for an exhibition (to gallery standard). - Connecting and testing the video and sound on media players and sound system - Tools, equipment, cabling and etc provided Setup must be clean, professional, and exhibition-ready.

Install a projector into the ceiling but also instal electrical outlet to plug it in. Will have the outlet and the ceiling mount etc.

Electric cord/wire repair and light fitting replacement

1.7 metre projector screen (roll down) to be installed into ceiling into studs

May need to attach chains or something similar to the screen so the screen level won’t be so high.

Have replaced projector and need someone to plug and program with homewifi, surround sound system and ensuring picture quality is adjusted to suit size of screen.

Installation of LP Morgan Galleria 100" screen onto masonry wall