Find a professional outdoor blinds contractor in Melbourne

Outdoor Blind System Replacement – Keeps Breaking in Wind (East Melbourne) Striped is what we have for current system we want same as the black system Looking for an experienced outdoor blind / awning installer to fix an ongoing issue at a residential property in East Melbourne. The current motorised drop-down blinds keep breaking and coming loose, even in light wind. They’re installed using a metal wire guide system, which clearly isn’t suitable. The motors aren’t the problem — the system itself is. A nearby property has a much stronger, wind-resistant blind system that works really well. We want to replace the existing setup with something similar — a proper track-guided or rigid system, not wire cables. ⸻ What We Need • Inspect the current blind setup • Explain why it keeps failing • Recommend a better, wind-safe system • Remove or modify the existing system • Supply and install a strong, long-lasting replacement • Reuse existing motors if possible (or advise if new ones are needed) ⸻ Fabric • Happy to reuse the existing fabric if it’s suitable (preferred option we like the colour) • Or replace it with a similar or better outdoor fabric that handles wind ⸻ Important This isn’t a handyman fix or quick repair. We’re after a proper long-term solution from someone who knows outdoor blinds. Photos will be provided showing: • The current broken system • Where it’s failing • The nearby system we want to match ⸻ Please Only Reply If • You have experience with outdoor blinds / awnings • You’ve installed wind-resistant systems before • You don’t use wire guide systems • You can show examples of similar work ⸻ When Replying, Please Include • Your experience • Photos or examples of similar jobs • What system you’d recommend • Availability to inspect in East Melbourne

I have 2 outdoor blinds i want hung. So i need 3 dynobolts installed into concrete per blind and ill do the rest

I have 3 outdoor blinds that need to be fitted. 1.Blind 200cm wide [deck] 2. Install brackets x2 and hang blind 116cm wide [side window] 3. Install brackets x4 and hang blind 240cm wide [back window

I need a Coolaroo outdoor blind from Bunnings installed on my apartment balcony. It’s a recessed, semi-enclosed balcony and the blind will be mounted inside the balcony opening. This is the blind - https://tinyurl.com/3tc7wy9s. It will leave a gap either side of the opening, hoping to get these as equal as possible. You will need a step ladder, appropriate drills bits for masonry/metal. Happy to send more photos if required.

Install outdoor blind . Coolaroo natural easy release 2.4 x 2.4

I need to install 2 clear blinds from the veranda to the floor outside my shop in northcote on high street. The blinds will need to be attached to the awning via a timber that need to be drilled to the frame, and need to be secured to the floor by installing a hinge to secure it too.

The bracket and pole needs to be re-attached to the brickwork to ensure I can pull the outdoor blinds up and down. Both blinds need fixing. Drill and ladder needed - drill bit must be able to drill through bricks

Outdoor blind needs to be reinstalled. Few bolts missing.

We have an Ezip/Ziptrak motorised outdoor blind covering an upstairs window. It is broken - has come off it's track and/or a part has broken so it won't drop or retract properly. Need someone with expertise in these blind to do repair. Photos attached. I'm not sure what a reasonable cost would be for this, so please feel free to quote.

I have an outside awning and heater which need to be installed. Both surfaces are Brick

Tracker has come off blind

Need to install a 2.4m x 2.4m outdoor blind face mounted to my alfresco ceiling facia. Job will require a ladder

Looking for a labourer to assist a main installer with outdoor blinds (fulltime) paying $250 a day. Jobs are all over melbourne, no experience necessary, but must have drivers licence and own transport and be reliable. Must be fit, lifting of blinds involved.

Pressure wash outdoor decking area (about 4m X 2m total area) and wash the pull down clear plastic outdoor blind. Shouldn't take more than 45 mins total. Will need to supply own pressure washer.

My outdoor blind has come out of the runners and now will not fully close. The canvas also appears to be uneven. The blinds are controlled by a switch inside with three buttons (up, stop, down). When the blinds are fully retracted I can hear the motor still working so need to stop it manually. Usually it automatically stops when fully retracted. Blind will need to be reset in the runners to level so it comes down the whole way and evenly. - Due date: Flexible

Outdoor blinds rolls down unevenly/crooked. Need help with re-aligning the blinds and for it to be properly fixed. - Due date: Flexible

NEED MY OUTDOOR BLINDS INSTALLED OF MY BALCONY ON THE 10TH FLOOR OF MY APARTMENT BUILDING. MUST BE A LICENSED TRADESPERSON AND NEED ONLY APPLY - Due date: Flexible

Installation required for 2 electric outdoor blinds. One is 3m x 1.7m The other blind is 2.4m x 1.5m. We have both blinds ready, and the power points ready as well. The blinds just need to be mounted and plugged into the power points. No electrical work needed. Pls see installation instructions attached. https://www.blindsonline.com.au/outdoor-window/30614/electric-shade-it-black.htm - Due date: Before Sunday, 26 November 2023

Replace the broken curtains 2 - Due date: Flexible

Need 2 barrkets drilled for outdoor blind and levelled - Due date: Needs to be done on Saturday, 4 March 2023