Find a professional gate installation in Kedron

i have posted three pictures. 2 with the damaged and 1 which the normal one so you can figure it out if you check the pictures. thank you!

Install Pet Gate, it is plasterboard will need a backing of some type / reinforce.

Our existing batwing gates to our verandah are rotten and need to be removed. We have new gates to replace them and need these to be hung following removal of the old gates. (new gates shown next to existing gates in 3rd picture) We will provide new hinges and a drop-bolt an would like to reuse the existing key/latch if possible. The new gates are slightly too tall so approx. 1cm will need to be planed off the bottom prior to installation.

3 dodgy gates. Large white one has been forced through to the other side (now only partially opens inwards) and has some wood rot in areas. Other 2 gates don't close properly. 1 scrapes along the ground. Potential for lots more jobs. These are just what I want repaired first. Thanks heaps :)

- front gate doesn’t close properly and needs fixing. Metal framed gate - ⁠ front sliding screen door doesn’t sit in the door frame so cannot be completely slid open or shut - ⁠ bedroom wardrobe ( a sliding mirror) has the same issue - reattach blinds

I need someone to fix my pool gate, which has come unscrewed and is loose from the fence. The fence itself is a bit old, so you may need to assess the best way to reattach it securely. The main goal is to ensure the gate is sturdy and meets pool safety standards. Job Details: • Inspect and secure the pool gate to the fence. • Reinforce or replace screws as necessary. • Make sure the gate closes and latches properly. I’ve attached photos for reference.

Not sure of price. Wanting quote for supply and install of new front fence and electric gate as well as a quote just for supply and install of electric gate. Preference is for white timber fence to go with style of Queenslander home. We think we will need a bifold gate. Photo of front of house with measurements for reference. Looking for something similar to the existing style, but taller

Bifold stair gate 1000 x 60

We have two wodden gates and the gate latches are not lining up and one of the latches is missing.

Someone snapped my tail gate off my 10x5 trailer. I need a boiler maker to weld it back together please. - Due date: Before Wednesday, 13 December 2023

We need the horizontal piece of timber that joins the fence to gate replaced and the hinges re-installed. Gate is 176cm High. - Due date: Before Friday, 1 December 2023

The yard metal gate opens in both directions, and we need this fixed to only opening inwards. We also require the gate to auto close thus provide and install some sort of spring, hydraulic or other device. - Due date: Flexible

• Supply and install Hinged gate approx 1800mm high x 1000mm wide, on box steel frame, with vertical timber battens (42mm x 42mm H3 pink pine Primed LOSP) at approx. 70mm centres, & including latch • Opening size is approx 1900mm high x 1050mm wide • Exclude painting • Gate to be mounted off existing rendered block work • Photos show location for front gate to be installed, and an example gate in our yard we would like this matched to. - Due date: Before Friday, 8 September 2023

Need a roof frame built for my entry gate Arbor 100mm aluminum posts are in place and just need to be cut to height. Scope is for supply and construction of all materials shown in the attached drawing. Drawing is a front elevation view. There are three gables required (75x38mm hardwood) Two top plates / bearers (75x38mm hardwood) Two pine fascia boards (front and back). All painted in satin white before assembly (I can supply the paint). Aluminum battens are 25x25x1.6 square radius tube. This will be an open roof with a vine growing on it. No corrugated iron is required. Happy to take prices with me supplying the battens if preferred - Due date: Flexible

I need a baby gate placed between my lounge room and kitchen. I have tried to do this myself but the cavity has cutouts making it an unusual case. The cavity is 109cm. I have 3 gates available to be placed, I’ve attached images below. This is a case for someone with patience and problem solving skills. - Due date: Flexible - Due date: Flexible - Due date: Flexible

Looking to build a relatively simple wooden gate. Purpose of gate is too keep dog from accessing side of house. Measurements are 1.4m height and 1.06m wide. There is a retaining wall that the gate needs content with which approx 60cm from the wall. Photo of area currently with temporary fence attached. Please quote for work. All materials will need to be included in Quote. - Due date: Before Saturday, 15 July 2023

Fix dent in tailgate of my MG - Due date: Flexible

Wind blew my gate back the wrong way last night and knocked it off it's hinges. Hinges are post style so it can be welded back onto the gate in situ. No fiddling about holding the gate in place - Due date: Before Saturday, 3 June 2023

We need our 1.8m fence extended along the side where the panels and lattice are, and across to the side of the house. The gate would be located in the part adjoining the house (to replace existing black pool fence). Fence will need to be built standalone, and must not be attached in any way to neighbour’s fence. No need for painting, just plain timber (or we are open to other ideas). The main object is to contain an escaping dog. Thank you! No painting - Due date: Flexible

Seeking quotes for supply and install of a 2.1m high chain wire fencing in grass yard as per sketch attached. Total of 70m of fencing with 4 x gates (2.1m H x 1m W) Top rail and bottom rail fencing. This fencing will create secure dog runs. Open to best fencing options. Site visit essential. - Due date: Flexible