Find a professional gate installation in Graceville

I am looking for a handy-person to a) fit a latch near the top of the gate b) fit a bolt lock horizontally near the bottom of the gate c) fill the whole left by a handle that has been removed d) paint the gate only with two coats. Please supply all that is needed with your offer. Note my 300+ 5-star reviews.

Remove the sliding aluminium gate and fence including posts. Total width is 14m I will keep the gate and fence panels for future installation. Electrician will disconnect power from the sliding gate separately.

Disconnect and remove power and motor of my sliding gate.

Safety switch tripping on fuse box - circuit for all lights on the house. Unable to isolate which light is causing the issue needs investigation. Please include your call out fee and hourly rate in the quote

I would like a panel of my fence removed and replaced with a gate and arbour as shown in the photos

Install a new fence between the posts pictured. Cut a hole in the slat panel and install gate. Must supply materials and tools.

I have an existing timber paling manual gate (swing gate x 2 ) that I would like to convert/replace as an automated sliding electric gate. Mains power available at gate location. Would ideally like it to match existing timber paling fence

Wind forced my gate to open outwards, snapping it off. Was attached to hebel wall. Small part of fence/post the gate was anchored to also dislodged. Need this reattached to the wall, will likely require some repair of anchor points in hebel wall as this was pulled out with screws.

I need my current fence removed and replaced either a fence in this style. With a driveway gate (approx 3.5m wide) with a sliding electric mechanism, and a lockable pedestrian gate. Total length of fence- 24metres Height of fence- 2m- with the scooped sections down to a height of 1.6m

Need someone handy to fix the front yard gate, some panels have rotten.

We would like two side gates on either side of the house to secure the backyard in preparation for a dog. One side is about 1.66M and the other side is 1.77M wide. Open to timber and aluminium options.

I need a timber side gate 1.8m high by approx 1.2m wide with metal frame- supplied and installed on a new build home in Graceville.

I have an existing timber fence g manual gate (swing gate x 2 ) that I would like to be electric with a remote control

I have an existing timber fence- I want to add a pedestrian gate. I can supply gate, and have spare palings to match existing

Fence pailings lose need securing (screwing) back in place. Two gate latches require adjustment. Please bring own tools and screws for fence.

Replace current timber picket fence, posts and gate (driveway and pedestrian). Paint in white. Frontage is 20m.

- Front fence - 23m wide - colonial top picket fence with hard wood posts - 4 post arbour with gate - automatic driveway gate

Wooden drive gate has metal frame which has two welded hinges but one has snapped off and needs replacing. Job requires removal of the broken piece and re-welding of a new hinge.

My Merlin electric sliding front gate is not sliding open or closed although there are no obstructions and the batteries on the remote is new.

Install an outward-swinging automatic swing gate for the driveway. Approximately 294 cm length and 180 cm height. Power from the power box on the exterior right of garage nearby (just into the driveway). Open to expert advice on whether a single or dual-leaf gate fits better. Another intention for the gate is to block out the street noise. No materials provided. Open to quotes and negotiation. Thank you for your consideration. - Due date: Flexible