Find a professional gate installation in Como WA

Polishing or rails of stainless steel gate Materials provided

Screws on the lower hinge of a 1.8m tall x 0.88m wide wooden gate have become loose and fallen off.

Rubbing back peeling paint in French windows. Front door and garden gate need doing and maybe eaves

Existing latch on door/gate at top of stairs is not aligned, so cannot be used. Need someone to adjust the door so it is aligned with the latch properly.

Looking for a qualified plumber to inspect and fix an issue with a methane/gas-like smell that comes through the house from time to time. The smell isn’t constant but appears randomly, so we need someone to check for possible leaks, blocked vents, or any other plumbing issues that could be causing it. My budget will change based on findings.

Existing baby gate at top of staircase with a lock that doesn’t line up therefore cannot use. Need someone to either fix the existing one or install new lock. Also need a screw drilled into the wall (wood/plaster) to hang a painting. All equipment and tools need to be supplied by the person doing the job.

Wire has been put at the base of two gates to prevent a small dog escaping. This wire is now old and rusty and falling off

Fencing project to repair car / pedestrian gate. The central column between the two gates has snapped at the base. Job is to remove the old section still in ground (~600mm), fabricate a replacement, and then reinstall the post (cemented in at least 600mm, level, and aligned to existing locks) and replace brickwork. -Remove broken steel post from ground -Install + align new post -Steel Post: 2400 x 100 x 50mm -Parts to install on post: gate stop (both sides) + electric lock cages (to remove from existing post) + solid top -Painted black -Cemented in 600mm into the ground -lock cages (strike plates?) to be aligned to existing locks My preference is for someone to supply materials and complete the whole job but if that isn't possible I could do the fabrication and you complete the removal / install only (including installing the lock cages). Open to discussion on how the job should go from someone with more experience.

Need installed a retractable baby gate Perma Child Safety

We have two wooden garden gates to install out our property that requires the skill of a carpenter or an experienced handy man. Below are photos of the gates and the places to hang them. The gates are not the same size as the area in which they are to be fitted and will require posts. Gate#1 - gap = 1.33m and the gate is 900mm. Gate#2 - gap = 1.12m and the gate is 1000mm.

I had a dog eat through a very old wooden lattice on our side gate - I just need a handy person who can replace the wooden lattice please I understand the cost of materials/labour varies We are currently using jockey straps and wood boards to block the hole

Automatic gate has been displaced, need someone to put it back into position so it is even (see pictures). - Due date: Before Saturday, 20 January 2024

Need a site meeting to discuss a quote for refurbishment and reinstallation of an existing swing gate + pedestrian gate currently in a 4m wide driveway. - Due date: Needs to be done on Friday, 1 December 2023

We have an exisiting asbestos fence. We would like have this removed and replaced with ideally slate fence and sliding gate in the backyard. Backs to lane. - Due date: Flexible

panel beat out the tailgate on ford ranger - Due date: Flexible

Wanting to put a basic gate between our car port and back yard. Gap is approximately 3m and will attack to brick house and one side and brick fence on the other. Looking for someone who can buy/build a gate for us and install asap - Due date: Flexible

I’ve got the screws in halfway but I don’t have the right size drill bit. (Either that or I’m doing something wrong lol) Requires Phillips head size 2 apparently but as long as you have a proper outdoor drill I’m sure it’ll work fine. My current drill is too small. Pic of the back of the box of screws too for reference. Should literally be a 5 min job if you have the right tools! 🤞 - Due date: Needs to be done on Saturday, 26 November 2022

Measurements etc can be provided once offer accepted. I will also need a combination lock installed in place of the key lock (this will be supplied by me). Any questions let me know! Thanks - Due date: Before Saturday, 12 November 2022

My side gate has been broken for a while - the gate is no longer on the hinges and is in poor condition. looking at either repairing if possible or just straight replacing it. Willing to discuss costs and pay rates :) - Due date: Flexible

Closures on 2 gates not functioning corretly. I doesn’t lock 1 locked and won’t lift to open gate - Due date: Flexible