Find a professional gate installation in Castle Hill NSW

Pricing is for quote only. 2 gate required, one upstairs entry 93cm one downstairs entry 88cm. One void to install perspex for child safety. Must be experienced, ready to hire will give task out asap. Trdie to provide all materials and gate

I need someone to cut me a new key (2) for an outdoor gate

The front pool gate got misaligned and doesn’t lock properly. Need adjustment.

Looking for an experienced gate fabricator/installer to supply and install aluminium gates for my side driveway. Requirements: * Main driveway opening: approx. 3870mm wide * Gate height: approx. 2000mm * Double swing driveway gate (2 leaves meeting in the centre) * Black/charcoal aluminium * Horizontal slat/privacy style, similar to attached reference * Black metal posts concreted securely into the ground * Heavy-duty adjustable hinges * Drop bolts/latching system * Gates need to be properly braced to prevent sagging I’d like quotes for two possible options: Option 1 – Double gate + pedestrian gate * Double swing driveway gate across the main opening * Separate pedestrian swing gate on the right-hand side * Lockable latch/handle on pedestrian gate Option 2 – No pedestrian gate * Double swing driveway gate only * Suitable posts and hardware * No separate pedestrian gate The area is currently clear and accessible. Photos and a rough drawing are attached showing the proposed layout. I’m open to either: 1. Supply + fabrication + installation, or 2. Installation only if you can advise what materials/gates I should purchase. Please quote Option 1 and Option 2 separately if possible, and include what’s covered in your price (materials, fabrication, posts, concrete, hardware and installation). Please also include your experience with similar gates and preferably photos of previous work.

I need a supply and install of a pool fence glass panel gate + hinge + lock. May need to be a custom panel, unsure. It needs to match existing glass, meet pool fencing requirements. 12mm thick with enduroshield Inspections for measurements welcome. 1125x1814 W x H size of opening Please subtract 90 from height as there is a 90 gap on other glass panels

Need to install new door handles with privacy lock in each bedroom door. Will provide materials

Attache two gates on both sides of house as colour bond 1.5 green colors. Thanks as shown in the photo graphs. Supply and instal thanks please. Sorry i am not sure about the cost or prices help me great. VJ

Need to replace magnetic gate lock on side gate

It needs to be solid but still lightweight due to its height, so it won’t sag over time under its own weight. Because of this, hardwood may not be the best option. The existing gate’s dimensions: 1120 W x2100 H. I have put a photo of what I am looking for to give an idea, simple but sturdy.

Need to install gate opner

I need a safety gate installed. We had one previously but unfortunately broke. I have purchased a brand new gate but there is a bit of damage on the wall from the previous gate

Existing timber fence needs reinforcement, repair, fix one existing gate and install new gate with lock. Will need new posts, palings and plinth for added support for long lasting. Need good workmanship and prompt service. Best would be to attend and check so we can discuss quote and agree to go ahead. I have only provided an estimate of work. It can be discussed once you attend inspection.

My house's carport has a wooden gate pole that is side-mounted onto a brick wall. The mounting anchors (expansion bolts?) come loose and need to be replaced and re-enforced. See the attached pictures. The requested task may involve these steps, but I am also open to suggestions - - taking the pole (with the attached gate) off the wall, - re-setting the mounting holes in the wall, - replacing the expansion bolts, and - re-fitting the pole and the gate. The wooden pole's dimension is 13cm x 9cm

the fence gate is rotten. We need a quote to change a new gate. Please give me the quote for the job and gate.

Need a weld on the bottom corner of an iron gate. Quick 15 minute job so no silly quotes please. You can turn up whenever you want when in the area and convenient. Refer photos for location of crack needing a weld.

Need to replace a timber gate to colourbond gate. Size: 1.5m x 1.8m Simple, flat floor. Thanks.

•single gate- house wall to retaining wall 1800mm Retaining wall to boundary fence 800mm , May require one fix panel over retaining wall . .double gate 3500mm with approximate 900mm fix panel

I need to install 3m pool aluminum fence with a gate between house wall and main fence

the sidegate latch is broken and needs to be fixed/replaced. refer pics attached

The handle came off when I was trying to close the gate. Now I can’t turn it back on.